
3- Cleaning of tracer drawer
Clean the tracer drawer and cover after every use with
Cidalkan wipes or other alternative.
Only use the below recommended
solutions. Other solutions may damage or
discolour the device.
LUNEAU TECHNOLOGY OPERATIONS
2
Rue
Roger
Bonnet-27340
PONT
DE
L
’ARCHE
-
FRANCE
-
T
el.
+
33
232
989
132
• [email protected] • www. luneautech.com
Wipes - Instructions for use please read carefully !
01 02 03
Take a wipe out of its packaging and close Clean thoroughly by hand wiping. Throw away the wipe.
the packaging tightly after use. Leave the product on for 5 minutes. Change wipe for each medical
Do not rinse. surface or device.
5- Cleaning of the external
body of the device
Please proceed to clean regularly the exterior of
the device. Most important the region around the
touchscreen, the region around the drawer and around
the switch. Before cleaning the unit, turn it off and
unplug it from the electric outlet.
To clean the plastic surface of the device gently wipe
the top, bottom, and front surfaces.
CMJN (print) : 80 / 0 / 7 / 0
RVB : 0 / 178 / 227
Pantone : 306 C
HEX : #00b2e3
CMJN (print) : 67 / 9 / 100 / 0
RVB : 97 / 167 / 48
Pantone : 369 C
HEX : #61a730
REF. 369113 Cidalkan wipes incl. alcohol.
disinfectant
Standards CE 0459
This document is not contractual - FC001166 - ind 00- April 2020
4- Cleaning of the toolsbox
Proceed to a regular cleaning of the exterior of the
toolsbox and particularly handles.
Every mechanical parts must be wiped
gently without applying excessive force.