Brother BE-0901E-AC Quick start guide

1
Upgrading the version
1.Turn on the power of the machine.
2.After the home position is detected, the standby screen appears.
3.Press twice while the standby screen is displayed.
4.Select the version upgrade icon with , and press .
5.The password input screen appears. Input “961”, and press .
6.The OK-to-upgrade screen appears. Press .
B
BE ES S- -9 91 16 6, ,9 90 01 1, ,1 12 21 16 6, ,1 12 20 01 1
For Technical Assistance Please Call Toll Free 1-877-4BROTHER

2
7.After the screen displays as follows, insert the setup disk, and press .
8.Installation of the setup disk starts. After the installation of the setup disk has
completed, the screen displays as follows. Insert the disk 1, and press .
10. If the message shown below appears on the screen, there is possibility that
the disk 1 for different model has been inserted. Check it, insert the correct
FD if it is wrong, and press .
11. Installation of the disk 1 starts.
12. After the installation of the disk 1 has completed, the screen displays as
follows. Insert the disk 2, and press .
13. Installation of the disk 2 starts. When there are four version upgrade floppy
disks in a set, the screen displays as follows after the installation of the disk 2
has completed. Insert the disk 3, and press . When there are three floppy
disks in a set, move on to STEP 16.

3
15. Installation of the disk 3 starts.
16. After the installation of the final FD (disk 2 or disk 3) has completed, the
screen displays as follows. Turn off the power of the machine.