Bryant 315AAV Operation manual

315AAV/315JAV
Variable-Speed 4−Way Multipoise Induced Combustion Gas Furnace
Sizes 070 thru 155
Product Data
P
LUS
80
V
Energy Efficient Gas Furnace
A10255
The Plus 80V Variable−Speed 4−Way Multipoise Gas Furnace
offers outstanding comfort and electrical efficiency in an 80%
AFUE furnace. You get all of the benefits of Perfect Heattand
Perfect Humidityt: reduced drafts, reduced sound levels, longer,
more gentle cycles, and less temperature differences between
rooms. Also, it improves indoor air quality, plus provides
outstanding electrical efficiency all year long: Homeowners can
now economically run constant fan to help eliminate temperature
differences throughout the house and to get better indoor air
quality. This Perfect Humidity furnace also increases comfort in the
summer by wringing out extra humidity. The 315AAV/JAV
furnaces are approved for use with natural or propane gas, and the
315JAV −Low NOx units are designed for California installations
and meet 40 ng/J NOx emissions. Can be installed in air quality
management districts with a 40 ng/J NOx emissions requirement.
Bryant EvolutionRSystem When this Plus 80V gas furnace is
matched with the Evolution Control and an air conditioner or heat
pump, you will experience the ultimate in Perfect Heat and Perfect
Humidity through unmatched control of temperature, humidity,
indoor air quality, and zoning. The Bryant Evolution System also
allows for worry-free operation through on-screen, text-based
service reminders and equipment malfunction alerts.
For even greater comfort and convenience, match the Plus 80V
furnace with a two−speed Puron air conditioner or heat pump. This
will create a fully communicating system, requiring only 4
thermostat wires between system components, and troubleshooting
can even be done from the outdoor unit without entering the home.
Optional remote access through telephone or Internet is also
available when combined with a remote connectivity kit.
STANDARD FEATURES
SEvolutiontSystem−match with the EvolutiontControl for
EvolutiontSystem benefits
SPerfect Heat, Perfect Humiditytoperation
Including Super-dehumidify mode for maximum humidity control
Two-stage heating even with single−stage thermostat-patented
Adaptive Control Technology
Reduced operating sound through low−stage operation and
sound elimination combustion system
SVariable-speed ECM blower motor
Increased SEER ratings for A/C and H/P systems as compared to
the Air Conditioning Heating and Refrigeration Institute’s
standard coil−only ratings when paired with selected Bryant
evaporator coils.
Matches CFM to cooling system over a wide range of static points
SSmartEvaptcan lower the humidity level in the home by
nearly 10 percent
SCabinet air leakage less than 2.0% at 1.0 in. W.C. and
cabinet air leakage less than 1.4% at 0.5 in. W.C. when
tested in accordance with ASHRAE standard 193
SFour-position furnace: Upflow, Horizontal Right, Horizontal
Left, Downflow
Thirteen different vent options
SCompact design only 33-1/3 in. (847 mm) tall
SMicroprocessor based “smart” control center
Fan on Plust−Continuous Fan speed adjustable from thermostat
Adjustable heating air temperature rise
Adapts heating stages to meet demand
Up to 12 cooling airflow selections with a wide range of capability
Dehumidify mode
Enhanced diagnostics with LED and reflective sight glass,
non−volatile fault code memory, and self test feature
On−board fuse for transformer protection
SPatented blocked vent safeguard to ensure proper furnace
venting
SInsulated blower compartment
SHYBRID HEATrDual Fuel System compatible
SAll models are chimney friendly when used with accessory vent
kit
SPerfect LighttIgniter
SResidential installations eligible for consumer financing
through the Comfort Credit Program

2
MODEL NUMBER NOMENCLATURE
315 E
VA
Bryant Type Code
Gas Furnace, 4-Way
Multipoise, 80%
Fixed-Capacity
A
Variations
066 135
Series
A
B
C
D
E
F
G
A
Brand Name
A - Common Unit
Electrical Supply
A = 110 to 125 Volts
Variations
JA
Model Code
A = Standard
J = Low NOx
Cooling Capacity
024 - 800 CFM
036 - 1200 CFM
042 - 1400 CFM
048 - 1600 CFM
060 - 2000 CFM
066 - 2200 CFM
Heating Size (Btuh)
045 - 45,000
070 - 70,000
090 - 90,000
110 - 110,000
135 - 135,000
155 - 155,000
For California Residents:
For installation in SCAQMD only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a
mitigation fee of up to $450. This furnace is not eligible for the Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com

3
DIMENSIONS
A180207

4
FURNACE
SIZE
A
CABINET
WIDTH
IN. (mm)
B
OUTLET
WIDTH IN.
(mm)
C
TOP &
BOTTOM FLUE
COLLAR
IN. (mm)
D
BOTTOM
INLET WIDTH
IN. (mm)
VENT
CONNECTION
SIZE
IN. (mm)
SHIPPING
WT.
LB (KG)
ACCESSORY
FILTER MEDIA
CABINET SIZE
IN. (mm)
036070 14-3/16 (360) 12-9/16 (319) 9-5/16 (237) 12-11/16 (322) 4 (102) 115 (52) 16 (406)
048090 17-1/2 (445) 15-7/8 (403) 11-9/16 (294) 16-1/8 (410) 4 (102) 130 (59) 16 (406)
060110 21 (533) 19-3/8 (492) 13-5/16 (338) 19-1/2 (495) 4 (102) 155 (70) 20 (508)
066135 24-1/2 (622) 22-7/8 (581) 15-1/16 (383) 23 (584) 4 (102)† 166 (75) 24 (610)
066155 24-1/2 (622) 22-7/8 (581) 15-1/16 (383) 23 (584) 4 (102)† 175 (79) 24 (610)
*135 and 155 size furnaces require a 5 or 6-in. (127 or 152 mm) vent. Use a vent adapter between furnace and vent stack. See Installation Instructions for
complete installation requirements.
CLEARANCE TO COMBUSTIBLES
A10269
Always Ask For
Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
315AAV/JAV

5
SPECIFICATIONS
UNIT SIZE 036070 048090 060110 066135 066155
RATINGS AND PERFORMANCE
Input Btuh*
Non-weatherized ICS
315JAV Upflow; all 315AAV High 66,000 88,000 110,000 132,000 154,000
Low 43,500 58,000 72,500 87,000 101,500
315JAV Downflow/Horizontal High 63,000 84,000 105,000 126,000 147,000
Low 43,500 58,000 72,500 87,000 101,500
Output Capacity (Btuh)†
Non-weatherized ICS
315JAV Upflow; all 315AAV High 54,000 71,000 89,000 107,000 125,000
Low 35,000 47,000 59,000 70,000 82,000
315JAV Downflow/Horizontal High 51,000 68,000 85,000 102,000 119,000
Low 35,000 47,000 59,000 70,000 82,000
AFUE† 80.0 80.0 80.0 80.0 80.0
Certified Temperature Rise Range - °F (°C)
High 30‐60
(17-33)
40‐70
(22-39)
40‐70
(22-39)
40‐70
(22-39)
45‐75
(25-42)
Low 30‐60
(17-33)
30‐60
(17-33)
25‐55
(14-30)
25‐55
(14-30)
30‐60
(17-33)
Certified External Static Pressure Heat/Cool 0.12/0.50 0.15/0.50 0.20/0.50 0.20/0.50 0.20/0.50
Airflow CFM‡ Heating High/Low 1060/615 1090/825 1330/1110 1725/1430 1775/1440
Cooling 1225 1400 2090 2100 2095
ELECTRICAL
Unit Volts-Hertz-Phase 115‐60‐1
Operating Voltage Range Min‐Max 104‐127
Maximum Unit Amps 9.0 9.6 15.1 14.9 15.0
Maximum Wire Length (Measure 1 Way in Ft (M) 30 (9.1) 29 (8.8) 29 (8.8) 30 (9.1) 29 (8.8)
Minimum Wire Size 14 12
Maximum Fuse or Ckt Bkr Size (Amps)** 15 20
Transformer (24v) 40va
External Control Heating 12va
Power Available Cooling 35va
Air Conditioning Blower Relay Standard
CONTROLS
Limit Control SPST
Heating Blower Control Solid‐State Time Operation
Burners (Monoport) 34567
Gas Connection Size 1/2‐in. NPT
GAS CONTROLS
Gas Valve (Redundant) Mfr. White‐Rodgers
Min. inlet pressure (In. W.C.) 4.5 (Natural Gas)
Max. inlet pressure (In. W.C.) 13.6 (Natural Gas)
Ignition Device Hot Surface
Factory‐installed orifice Size 43
BLOWER DATA
Direct‐Drive Motor HP (ECM) 1/2 1/2 1 1 1
Motor Full Load Amps 7.7 7.7 12.8 12.8 12.8
RPM (Nominal)‐Speeds 300‐1300 300‐1300 300‐1300 300‐1300 300‐1300
Blower Wheel Diameter x Width - In. (mm) 10 x 6
(254 x 152)
10 x 8
(254 x 203)
11 x 10
(279 x 254)
11 x 11
(279 x 279)
11 x 11
(279 x 279)
* Gas input ratings are certified for elevations to 2000 ft. (610 M) In USA for elevations above 2000 ft (610 M), reduce ratings 4 percent for each 1000 ft (305
M) above sea level. Refer to National Fuel Gas Code NFPA 54/ANSI Z223.1-2012 Table F.4 or furnace installation instructions.
† Capacity in accordance with U.S. Government DOE test procedures.
‡ Airflow shown is for bottom only return‐air supply for the as‐shipped speed tap. For air delivery above 1800 CFM, see Air Delivery table for other options. A
filter is required for each return‐air supply. An airflow reduction of up to 7 percent may occur when using the factory‐specified 4‐5/16 in. (110 mm) wide, high
efficiency media filter.
** Time-delay type is recommended.
ICS Isolated Combustion System
315AAV/JAV

6
AIR DELIVERY −CFM (With Filter)*
Unit Size Operating Mode
CFM
Airflow
Setting
External
Static
Pressure
Range*
(In. W.C.)
External Static Pressure (ESP) (IN. W.C.)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
036070 AIRFLOW (CFM)
†† Low Heat 735 (615)† 0-0.50 735 735 735 735 725
High Heat 1180 (1060)† 0-1.0 1160 1165 1175 1180 1180 1180 1180 1180 1180 1175
†† 1-1/2-Ton Cooling 525 0-0.50‡ 515 500 500 490 485
†† 2-Ton A/C Cooling 700 0-0.50‡ 690 680 675 680 675
2-1/2-Ton A/C Cooling 875 0-1.0‡ 875 875 875 870 865 855 850 835 825 820
3-Ton A/C Cooling 1050 0-1.0‡ 1050 1050 1050 1050 1050 1050 1045 1035 1020 1000
3-1/2-Ton A/C Cooling 1225 0-1.0 1220 1225 1225 1225 1225 1220 1205 1190 1185 1170
Maximum 1400 0-1.0 1395 1400 1400 1400 1395 1385 1370 1340 1300 1245
048090
Low Heat 985 (825)† 0-1.0 950 970 985 985 985 985 985 985 985 980
High Heat 1210 (1090)† 0-1.0 1190 1205 1210 1210 1210 1210 1210 1210 1210 1200
†† 1-1/2-Ton A/C Cooling 525 0-0.50‡ 525 520 525 495 475
†† 2-Ton A/C Cooling 700 0-0.50‡ 680 680 680 675 670
2-1/2-Ton A/C Cooling 875 0-1.0‡ 815 845 845 855 850 850 845 835 820 805
3-Ton A/C Cooling 1050 0-1.0‡ 1005 1005 1015 1035 1040 1040 1035 1030 1025 1010
3-1/2-Ton A/C Cooling 1225 0-1.0 1190 1200 1200 1205 1205 1215 1205 1200 1185 1170
4-Ton A/C Cooling 1400 0-1.0 1350 1370 1390 1390 1400 1390 1380 1380 1360 1340
Maximum 1600 0-1.0 1595 1600 1600 1600 1595 1555 1505 1465 1430 1390
060110***
Low Heat 1320 (1110)† 0-1.0 1275 1295 1315 1320 1320 1320 1320 1320 1320 1315
High Heat 1475 (1330)† 0-1.0 1460 1465 1475 1475 1475 1475 1475 1475 1465 1465
†† 2-Ton A/C Cooling 700 0-0.50‡ 700 700 700 700 700
†† 2-1/2-Ton A/C Cooling 875 0-0.50‡ 875 875 875 875 875
†† 3-Ton A/C Cooling 1050 0-0.50‡ 1050 1050 1050 1050 1050
3-1/2-Ton A/C Cooling 1225 0-1.0‡ 1225 1225 1225 1225 1225 1225 1225 1225 1225 1225
4-Ton A/C Cooling 1400 0-1.0‡ 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400
5-Ton A/C Cooling 1750 0-1.0‡ 1750 1750 1750 1750 1750 1750 1750 1750 1740 1725
6-Ton A/C Cooling 2100 0-1.0 2100 2100 2100 2100 2090 2075 2055 2040 2005 1970
Maximum 2200 0-1.0 2200 2190 2190 2180 2155 2145 2125 2100 2080 2020
066135
Low Heat 1700 (1430)† 0-1.0 1700 1700 1700 1700 1700 1695 1700 1695 1685 1670
High Heat 1915 (1725)† 0-1.0 1900 1905 1915 1915 1915 1915 1915 1915 1915 1915
†† 2-Ton A/C Cooling 700 0-0.50‡ 700 700 700 700 665
†† 2-1/2-Ton A/C Cooling 875 0-0.50‡ 870 870 865 865 865
†† 3-Ton A/C Cooling 1050 0-0.50‡ 1010 1030 1050 1050 1050
3-1/2-Ton A/C Cooling 1225 0-1.0‡ 1155 1180 1200 1210 1220 1225 1225 1225 1225 1225
4-Ton A/C Cooling 1400 0-1.0‡ 1395 1400 1400 1400 1400 1400 1400 1390 1375 1355
5-Ton A/C Cooling 1750 0-1.0‡ 1740 1750 1750 1750 1735 1740 1735 1730 1715 1700
6-Ton A/C Cooling 2100 0-1.0 2075 2085 2090 2100 2100 2100 2090 2080 2055 2025
Maximum 2200 0-1.0 2180 2195 2200 2200 2200 2200 2185 2165 2140 2095
066155
Low Heat 1715 (1440)† 0-1.0 1715 1715 1715 1715 1715 1705 1710 1705 1705 1695
High Heat 1970 (1775)† 0-1.0 1955 1965 1965 1970 1970 1970 1970 1970 1970 1960
†† 2-Ton A/C Cooling 700 0-0.50‡ 700 700 700 700 680
†† 2-1/2-Ton A/C Cooling 875 0-0.50‡ 865 875 875 865 865
†† 3-Ton A/C Cooling 1050 0-0.50‡ 1015 1020 1035 1045 1050
3-1/2-Ton A/C Cooling 1225 0-1.0‡ 1160 1185 1215 1225 1225 1225 1225 1225 1225 1225
4-Ton A/C Cooling 1400 0-1.0‡ 1385 1400 1400 1400 1400 1400 1395 1395 1380 1360
5-Ton A/C Cooling 1750 0-1.0‡ 1745 1750 1750 1750 1745 1740 1745 1745 1740 1735
6-Ton A/C Cooling 2100 0-1.0 2055 2070 2080 2085 2095 2100 2100 2100 2090 2065
Maximum 2200 0-1.0 2175 2190 2200 2200 2200 2200 2200 2200 2180 2160
*Actual external static pressure (ESP) can be determined by using the fan laws (CFM 2 proportional to ESP); such as, a system with 1180 CFM
at 0.5 ESP would operate at cooling airflow of 1050 CFM at 0.4 ESP and low-heating airflow of 735 CFM at 0.19 ESP.
{Comfort airflow values are shown in parenthesis. Comfort airflow is selected when the low-heat rise adjustment switch (SW1-3) is OFF and
the comfort/efficiency switch (SW1-4) is ON.
}Ductwork must be sized for high-heating CFM within the operational range of ESP.
{{Operation within the blank areas of the chart is not recommended because high-heat operation will be above 1.0 ESP.
***All airflow on 110 size furnace are 5% less on side return only installations.
315AAV/JAV

7
ACCESSORIES
DESCRIPTION PART NO. 036070 048090 060110 066135 066155
Media Filter Cabinet
FILCABXL0016 X X
FILCABXL0020 X
FILCABXL0024 X X
Cartridge Media Filter
FILBBCAR0016 X X
FILBBCAR0020 X
FILBBCAR0024 X X
EZ Flex Media Filter with End Caps
EXPXXUNV0016 X X
EXPXXUNV0020 X
EXPXXUNV0024 X X
Replacement EZ Flex Filter Media
EXPXXFIL0016 X X
EXPXXFIL0020 X
EXPXXFIL0024 X X
External Bottom Return Filter Rack
KGBFR0401B14 X
KGBFR0501B17 X
KGBFR0601B21 X
KGBFR0701B24 X X
Unframed Filter, 3/4‐in. (19 mm)
KGAWF1306UFR X X
KGAWF1406UFR X
KGAWF1506UFR X X
Flue Extension KGAFE0112UPH X X X X X
Combustible Floor Base KGASB0201ALL X X X X X
Downflow Vent Guard KGBVG0101DFG X X X X X
Vent Extension Kit KGAVE0101DNH X X X X X
Chimney Adapter Kit KGACA02014FC X X X
KGACA02015FC X X
Natural‐to‐Propane Conversion Kit * KGBNP5201VSP X X X X X
Propane‐to‐Natural Conversion Kit KGBPN4401VSP X X X X X
Label Kit KGALB0301KIT X X X X X
ECM Motor Simulator KGBSD0301FMS X X X X X
Advanced Product Monitor KGAFP0301APM X X X X X
High Altitude Kit KGAHA5801PSW X X X X X
Gas Orifice
LH32DB207
See Installation Instructions for model, altitude, and heat value
usages.
LH32DB202
LH32DB200
LH32DB205
LH32DB208
LH32DB078
LH32DB076
LH32DB203
LH32DB201
LH32DB206
LH32DB209
LH32DB210
UV Lights Model UVL
Heat/Energy Recovery Ventilator Models HRV or ERV
Humidifier Model HUM
Electronic or Mechanical Air Cleaner Model EACA or EZXCAB
* Factory authorized, field installed. Fuel conversion kits are CSA (Formerly AGA/CGA) recognized.
X = Accessory
315AAV/JAV

8
CONTROLS −THERMOSTAT AND ZONING
DESCRIPTION PART NO.
NON‐PROGRAMMABLE
For use with 1‐speed Air Conditioner - deg. F/C, Auto Changeover T6-NAC, T2-NAC
For use with 1‐speed Heat Pump - deg. F/C, Auto Changeover T6-NHP, T2-NHP*
For use with 2‐speed Air Conditioner - deg. F/C, Auto Changeover T6-NRH*
For use with multi‐use / stage configurations - deg. F/C, Auto Changeover/Temperature and Humidity Control T6-PRH†
PROGRAMMABLE THERMOSTAT SELECTION
For use with 1‐speed Air Conditioner - deg. F/C, Auto Changeover, 7‐Day Programmable T6-PAC
For use with 1‐speed Heat Pump - deg. F/C, Auto Changeover, 7‐Day Programmable T6-PHP*
For use with 2‐speed Air Conditioner - deg. F/C, Auto Changeover, 7‐Day Programmable T6-PRH*
For use with 1‐speed Air Conditioner - deg. F/C, 5-2 Day Programmable T6-PAC
For use with multi‐stage applications - deg. F/C, Auto Changeover, 7‐Day Programmable T2-PHP‡
For multi‐use / stage configurations - deg. F/C, Auto Changeover, 7‐Day Programmable/Temperature and
Humidity Control
T6-PRH†
ZONING CONTROL SELECTION
Zone Perfect 3‐Zone kit ZONEBB3ZAC01, ZONEBB3ZHP01
Zone Perfect Plus 2‐Zone kit/Temperature and Humidity Control ZONEBB2KIT01‐B
Zone Perfect Plus 4‐Zone kit/Temperature and Humidity Control ZONEBB4KIT01‐B
Zone Perfect Plus 8‐Zone kit/Temperature and Humidity Control ZONEBB8KIT01‐B
EVOLUTIONt** CONTROLS
EvolutiontControl Deluxe 7‐Day Programmable (Wall‐mounted system control.) SYSTXBBUID01
EvolutiontControl Deluxe Zoning 7‐Day Programmable (Wall‐mounted control for a multi‐zone system.) SYSTXBBUIZ01
Evolutiont4‐Zone Damper Control Module (Wall‐mounted control for a four‐zone system.) SYSTXBB4ZC02
EvolutiontSmart Sensor (Optional wall control used to monitor temperature and/or fan control in
an individual zone.)
SYSTXBBSMS01
EvolutiontRemote Room Sensor (Monitors temperature in an individual zone.) SYSTXBBRRS01
EvolutiontSystem Access Module (Hardware for wireless access and control via phone or internet.) SYSTXBBSAM01
EvolutiontNetwork Interface Module (Connects Heat Recovery and Energy Recovery Ventilators
or older two‐speed outdoor models to system.)
SYSTBBNIM01††
Decorative Back Plate for EvolutiontControl (Decorative wall plate.) SYSTXXXBPU01
* Model HP and 2S thermostat must be field converted to air conditioner operation.
† Thermidistat Control can be configured for multiple use and staging. It must be configured for each specific application.
‡ Dual Fuel thermostat is used with furnace and heat pump application.
** When applied with Bryant's Perfect Humiditytseries 355AAV, 315AAV/JAV and FE Indoor Models
†† Must be installed in Dual‐Fuel Evolution system applications.
315AAV/JAV

9
A02058
SEE NOTES: 1,2,4,7,8,9
UPFLOW
SEE NOTES: 1,2,3,4,7,8,9
UPFLOW
SEE NOTES: 1,2,4,5,7,8,9
DOWNFLOW
A02059 A02061
SEE NOTES:1,2,3,4,5,7,8,9
DOWNFLOW
SEE NOTES: 1,2,3,4,5,7,8,9
DOWNFLOW
SEE NOTES: 1,2,4,5,6,7,8,9
DOWNFLOW
A02060 A02063 A02062
Venting Notes
1. For common vent, vent connector sizing and vent material: United States, latest edition of the National Fuel Gas
Code (NFGC), ANSI Z223.1/NFPA 54.
2. Immediately increase to 5‐in. (127 mm) vent connector outside furnace casing when 5‐in. (127 mm) vent connector
required, refer to Note 1.
3. Side outlet vent for upflow and downflow installations must use Type B vent immediately after exiting the furnace,
except when Downflow Vent Guard is used in downflow position.
4. Type B vent where required, refer to Note 1.
5. 4-in. (102 mm) single wall vent must be used inside furnace casing and the Downflow Vent Guard Kit.
6. Accessory Downflow Vent Guard Kit required in downflow installations with bottom vent configuration.
7. Chimney Adapter Kit required for exterior masonry chimney applications. Refer to Chimney Adapter Kits for sizing
and complete application details.
8. Secure vent connector to furnace elbow with (2) corrosion‐resistant sheet metal screws, space approximately 180°
apart.
9. Secure all other single wall vent connector joints with (3) corrosion‐resistant screws spaced approximately 120°
apart. Secure Type B vent connectors per vent connector manufacturer's recommendations.
315AAV/JAV

10
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL RIGHT
A02068
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL RIGHT
A02070
SEE NOTES: 1,2,4,7,8,9
HORIZONTAL RIGHT A02069
SEE NOTES: 1,2,4,7,8,9
HORIZONTAL LEFT A02064
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL LEFT A02065
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL LEFT
A02066
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL LEFT
A02067
315AAV/JAV

11
GUIDE SPECIFICATIONS
Gas Furnace
315AAV/JAV
General
SYSTEM DESCRIPTION
Furnish a _________________ fixed capacity gas-fired
furnace for use with natural gas or propane (factory
authorized conversion kit required for propane).
QUALITY ASSURANCE
Unit will be designed, tested and constructed to the
current ANSI Z 21.47/CSA 2.3 design standard for
gas-fired central furnaces.
Unit will be 3rd party certified by CSA to the current
ANSI Z 21.47/CSA 2.3 design standard for gas-fired
central furnaces.
Unit will carry the CSA Blue StarRlabel.
Unit efficiency testing will be performed per the current
DOE test procedure as listed in the Federal Register.
Unit will be certified for capacity and efficiency and
listed in the latest AHRI Consumer’s Directory of
Certified Efficiency Ratings.
Unit shall carry the current Federal Trade Commission
Energy Guide efficiency label.
DELIVERY, STORAGE AND HANDLING
Unit shall be shipped as single package only and is
stored and handled per unit manufacturer’s
recommendations.
WARRANTY (for inclusion by specifying engineer)
U.S. only. Warranty certificate available upon request.
Products
EQUIPMENT
Components shall include: slow-opening gas valve to
reduce ignition noise, regulate gas flow, with electric
switch gas shut-off; flame proving sensor, hot surface
igniter, pressure switch assembly, flame rollout switch,
blower and inducer assembly, 40va transformer;
low−voltage (heating) (heating/cooling) thermostat.
Blower Wheel and Blower Motor
Galvanized blower wheel shall be centrifugal type,
statically and dynamically balanced. Variable−speed ECM
blower motor shall be permanently lubricated with sealed
bearings, of _______hp, and shall be multiple-speed direct
drive. Blower motor shall be soft mounted to the blower
scroll to reduce vibration transmission.
Filters
Furnace may have reusable-type filters. Filter shall be
_______ in. (mm) (x) _______in. (mm).
Casing
Casing shall be of .030−in. (.76 mm) thickness
minimum, pre−painted steel.
Inducer Motor
Inducer motor shall be soft mounted to reduce vibration
transmission.
Draft Safeguard Switch
Draft Safeguard Switch (blocked vent safeguard) shall
be factory installed to reduce the possibility of vent gas
infiltration due to a blocked or restricted vent pipe.
Heat Exchangers
Heat exchangers shall be a 4-Pass 20 gage aluminized
steel of fold-and-crimp sectional design when applied
operating under negative pressure.
Controls
Control shall include a micro-processor based
integrated electronic control board with at least 11 service
troubleshooting codes displayed via enhanced flashing
LED diagnostic light on the control, a self-test feature that
checks all major functions of the furnace within one
minute, and a replaceable automotive-type circuit
protection fuse. Multiple operational settings available
including, separate blower speeds for low heat, high heat,
low cooling, high cooling and continuous fan. Continuous
fan speed may be adjusted from the thermostat. Cooling
airflow will be selectable between 350 or 400 CFM per ton
of air conditioning. Features will also include temporary
reduced airflow in the cooling mode for improved
dehumidification when an EvolutiontControl or
ThermidistatRis selected as the thermostat.
OPERATING CHARACTERISTICS
Heating Capacity shall be ________ Btuh input;
________ Btuh output capacity.
Fuel Gas Efficiency shall be 80% AFUE.
Air delivery shall be ___________ CFM minimum at
0.50 In. W.C. external static pressure.
Dimensions shall be: depth __________ in. (mm);
width _________ in. (mm); height_________in. (mm)
(casing only). Height shall be_________in. (mm) with
A/C coil and _____________in. (mm) overall with
plenum.
ELECTRICAL REQUIREMENTS
Electrical supply shall be 115 volts, 60 Hz,
single−phase (nominal). Minimum wire size shall
be_________AWG; maximum fuse size or circuit breaker
shall be __________Amps.
SPECIAL FEATURES
Refer to section of the product data sheet identifying
accessories and descriptions for specific features and
available enhancements.
315AAV/JAV

12
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
E2018 Bryant Heating & Cooling Systems D7310 W. Morris St. DIndianapolis, IN 46231 Edition Date: 09/18
Replaces: PDS 315A-10
Catalog No. PDS315A-11
315AAV/JAV