BUDDAH TEK ROVER 1 User manual

USER MANUAL
*Shown here with PlayStation PS4 Slim not included.

BOX CONTENTS
USER GUIDE TRANSLATIONS
www.buddahtek.com/usermanual
PRODUCT SPECS:
• TSA approved universal console
gaming monitor. Chassis ts Xbox
One X, Xbox One S, Playstation PS4
Pro and Playstation PS4 Slim with built
in 13.3” FHD 1920 x 1080p 60 Hz
Anti-glare IPS widescreen monitor
• HDMI In, HDMI Out for pass though
play to external monitor, USB
powered from console
• Built in 3 watt passive radiator subwoofer
dynamic sound speakers and dual
3.5mm headphone jacks with Bluetooth
5.0 to play your own music source
through the speakers while gaming
• Dimensions: H 3.97 in (10.1 cm) x
W 12.1 in (30.8 cm) x Depth 10.5 in
(26.7 cm)
• Weight 4 lbs, 9.6 oz (2.94 kg)
• 100-240V AC
ROVER 1 PORTABLE
GAMING STATION
DUAL USB TO 5V
POWER CABLE
HDMI CABLE 4 INCH
(10.1CM)
Spanish: Para obtener instrucciones en español, escanee el código QR
German: Für Anweisungen in Deutsch scannen Sie den QR-code
Italian: Für Anweisungen in Deutsch scannen Sie den QR-code
French: Pour obtenir des instructions en français, scannez le
Portuguese: Para obter instruções em português, digitalize o código QR code QR
Korean: 한국어 지침은 QR 코드 스캔
Chinese: 有关中文说明，请扫描QR码
Japanese: 日本語の手順については、QRコードをスキャンしてください
Arabic: للحصول على تعليمات باللغة العربية ، قم بمسح رمز الاستجابة السريعة
PS4 SLIM
TIGHT FIT PANEL

FUNCTIONS
HDMI IN
HDMI OUT
USB PORT POWER ON/OFF
LOCKING BAR
BLUETOOTH
USB POWER
BEFORE GETTING STARTED
NOTE:
Please read
the entire user
manual and the
manufacturer’s
warranty before
using the ROVER 1.
Unlock the Locking Bar
Place both hands on the sides of
the ROVER 1. Using your thumbs,
unlock the lock latches by sliding
them outward.
Remove Accessory Box and Tight Fit Panel
Slide out the locking bar until it stops to remove
Accessory Box and PS4 Slim Tight Fit Panel (if applicable).
Using both hands, pull Accessory Box out by the tab and
hold the Tight Fit Panel to remove simultaneously.
DUAL 3.5MM HEADPHONE

GETTING STARTED: XBOX ONE S/X
1
3
2
START
Load Xbox into ROVER 1.
Once the accessories box and Tight Fit Panel are
removed, place one hand in back to stabilize the
ROVER 1. Line up the Xbox and carefully push it
completely into open cavity until it stops.
Lock in the Xbox.
Push the locking bar until it stops or rests
touching the front of the Xbox. Secure the bar
in place by pushing both locks inwards.
Attach HDMI and dual USB Power Cable.
In the rear of the unit, attach the HDMI Out of the Xbox
to the HDMI In of the ROVER 1. Insert the dual USB
cable into both USB inputs on the Xbox. Insert the other
end of the USB cable into the barrel jack power input on
the back of the ROVER 1.
Power On.
Attach the Xbox power cord into the Xbox and plug
into wall outlet. Open the screen. Power on the Xbox
rst, then push the red power button to power on the
ROVER 1. The ROVER 1 indicates that it is on when
the red LED lights up around the entire unit.
NOTE: Keep console loaded and play on a TV screen or monitor.
Connect the HDMI Out from the console to the HDMI In of the TV or monitor. Close the
ROVER 1 screen. The picture and sound will now bypass the ROVER 1 and be routed to external source.
4
FINISH

GETTING STARTED: PS4 PRO/SLIM
1
3
2
4
START
Install the Tight Fit Panel
Using both hands, place Tight Fit Panel into unit by pushing
evenly on the left and right ends and push with thumbs
rmly into place. (Note: To remove bar, reach underneath
with both hands and pull from the inside outward.)
Load the Playstation into ROVER 1.
Place one hand in back to stabilize the
ROVER 1. Line up and carefully push the
Playstation completely into open cavity
until it stops.
Lock in the Playstation.
Push the locking bar until it stops or rests
touching the front of the Playstation. Secure the
bar in place by pushing both locks inwards.
Attach HDMI and Dual USB Power Cable.
In the back of the unit, attach the HDMI Out of the Playstation to
the HDMI In of the ROVER 1. In the front, insert the dual USB cable
into both USB inputs on the Playstation and the other end of the
cable into the barrel jack power input on the front of the ROVER 1.
Power On.
Attach the PlayStation power cord into the PlayStation
and plug into wall outlet. Open the screen. Power on the
Playstation rst, then the push the red power button to power
on the ROVER 1. The ROVER 1 indicates that it is on when
the red LED lights up around the entire unit.
PS4 Slim ONLY
(If loading a PS4 Pro,
skip to Step 2)
5
FINISH
BACK FRONT

FUNCTIONS: BUTTONS
Decrease Screen Brightness,
DOWN function in Main Menu,
and decrease input value
Decrease
Volume
Mute Power ON/OFF
Conrm
Selection
Increase Screen Brightness,
UP function in Main Menu and
increase input value
Increase
Volume
Back
Function
Bluetooth: Pair with
device named ‘ROVER 1’
Change Display Menu
Functions
To adjust the display menu functions,
rst press menu, then press +/ -
buttons to scroll up/down the desired
elds. Press OK to conrm selection.
Once selection is highlighted in red, use
+/ - buttons to select subelds. Press
OK to select the sub eld then press
+/- to adjust the value. Press menu to
back out of elds and hide menu.
Connect to Bluetooth
When Bluetooth button icon has red
light, the game console connected
through the HDMI input is the chosen
audio source.
To choose Bluetooth as the audio
source, connect by pressing the button
until it starts ashing blue. Choose
‘ROVER 1’ as the discoverable device
on smart phone or Bluetooth audio
device. The light will turn solid blue
when paired successfully.
To hear both HDMI and Bluetooth
audio source simultaneously, press
button once again. The light will turn
both red and blue to indicate both
sources will be heard together.
Volume on ROVER 1 controls total
volume, Bluetooth source controls
its own volume relative to the total
volume of HDMI source.
Mute Power ON/OFF
Main Menu
Function

R1 Messenger Bag
To store your
ROVER 1, rst turn
off unit and unplug
the HDMI and USB
power cables. Load
unit in messenger
bag bottom down,
lock bar facing up.
Store controllers in
the two straps and
all cables in the
accessory storage
pocket.
LUGGAGE
TROLLEY
STRAP AND
SECURE
PASSPORT
POCKET.
PADDED ROVER 1 /
CONSOLE
COMPARTMENT
CABLE / ACCESSORY
STORAGE
WATERPROOF ZIPPER FOR
WEATHER RESISTANCE
CONTROLLER
STRAPS