The best mower for the best cut
Buhler Farm King has been making nishing mowers for more than 15 years. ree
of these nishing mowers together create one magnicent volume grass trimmer: the
Triplex Finishing Mower. Nine blades generate a powerful vacuum for a crisp, clean cut.
Each deck oats independently over rolling terrain for a uniform, manicured trim. ere
is a 1 ⅝" blade overlap on the YT450, while all the other models have a 2 ⅝" blade over-
lap. is overlap helps to prevent stripping, especially when turning. e standard front
UHMW roller prevents scalping on uneven turf. A 5-position hitch adjusts to most
tractors allowing the mower to remain level, achieving an even cutting height.
Transporting with ease
Whether moving from the third fairway to the tenth, or from one side of the city
to the other, the Triplex Finishing Mower is designed to be transported with ease. A
cast clevis hitch is standard and a 2 ⁄" ball hitch is optional for road transport. e 5-
position hitch adjustment makes it easy to move, regardless of the hitch height of the
tow vehicle. e decks are lied into position by hydraulic cylinders and are auto-
matically locked in place for transport. Upon arrival at the destination, the decks are
unlocked right from the tractor seat using a cable, or can be released using the optional
hydraulic system. Either way, it makes moving to a new location easy.
YT MODEL 450 550 650 750
Cutting width 134" (11.2') 163" (13.6') 200" (16.7') 236" (19.9')
Transportation width bottom / top 84" / 90" 86" / 100" 86" / 102" 79" / 102"
Transportation height / length 80" / 13' 84 ½" / 15' 9" 103" / 16' 3" 121 ½" / 16' 9"
Recommended horsepower 35 40 45 50
Parking jack Standard Standard Standard Standard
Wing frame 2" x 3" x ¼" wall tube 2" x 3" x ¼" wall tube 2" x 3" x ¼" wall tube 2" x 3" x ¼" wall tube
Wing ex †30° up 17° down 35° up 16° down 30° up 11° down 30° up 11° down
Deck overlap 5" 8.5" 8" 8"
Gear box rating at 540 RPM 66 horsepower - divider box / 30 horsepower - wing boxes
Hitch type Cast clevis - standard, 2 /" ball hitch - optional
Driveline main / wings Series 4-80° CV / series 2 Series 6-80° CV / series 2 Series 6-80° CV / series 2 Series 6-80° CV / series 2
Deck width / thickness 4' / 10 Ga. 5' / 7 Ga. 6' / 7 Ga. 7' / 7 Ga.
Deck tires 8 (15" x 6" x 6") 10 (15" x 6" x 6") 10 (15" x 6" x 6") 12 (15 " x 6 " x 6 ")
Main frame tire 2 (27" x 10 ½" x 15") 2 (27" x 10 ½" x 15") 2 (27" x 10 ½" x 15") 2 (27" x 10 ½" x 15")
Blades per deck / overlap 3 blades / 1 ⁄" 3 blades / 2 ⁄" 3 blades / 2 ⁄" 3 blades / 2 ⁄"
Blade tip speed 15,485 ft/min 15,829 ft/min 18,737 ft/min 18,552 ft/min
Cutting height 1 ½" to 4 ½" 1 ½" to 4 ½" 1 ½" to 4 ½" 1 ½" to 4 ½"
Mower drive system 2 belt B groove 2 belt B groove 2 belt B groove 2 belt B groove
Front roller 4" x 7" UHMW Poly 4" x 7" UHMW Poly 4" x 7" UHMW Poly 4" x 7" UHMW Poly
Weight 3347 lbs 3919 lbs 4349 lbs 4633 lbs
† Not recommended forop erationgreater than 30°, actual measurement based on mower deck flex.
Wheels and hubs
The modelYT750 has four wheels on each of the
three decks. Models YT650 and YT550 have four
wheels on the wing decks and two on the center
deck. The YT450 has three wheels on the wing
decks and two on the center deck. Each wheel yoke
assembly includes a cutting height adjustment on
the 1 ¼”wheel yoke shaft.Tapered roller bearings in
the wheel hubs ensure long-term reliability without
needing frequent lubrication.
Powerful airflow lifts grass for a crisp, clean cut
Quality construction
built-in reliability
