Camec RVMedia 042702 User manual

042702 (32")

Contents
What’s in the Box
TV Controls
TV Inputs and Outputs
Remote Control
SYSTEM CONNECTIONS
AV Input
PC Input
HDMI Input
YPbPr Component Input
USB Input
2
3
4
9-11
5
5
6
6
7
COAXIAL Output 7
OSD MENU OPERATION
Main Menus
Channel Menu
Picture Menu
Sound Menu
Time Menu
Option Menu
MEDIA OPERATION
Photo Viewer
Music Playback
Video Playback
Text Viewer
USB Multimedia Playback Formats
Built-in DVD Player Operation
12
13
14
15
16
17
19
20
20
20
21
22-27
Lock Menu 18
8
Installing Batteries in theRemote Control
Cleaning and Maintenance
Troubleshooting
28
29-30
31
Specifications
Antenna Connection 8
Important Safety Instructions
Source Selection 12
Hotel Mode 17
EPG - Eletronc Program Guide 18
PVR - Personal Video Recorder 18

47cm (19”)
Part Number: 042419
INPUT DC 12V 3A 28W

1 2
What’s in the Box
19" TV with inbuilt DVD Player
042702 (19")
0424 19(19 ")
Manual
2 Screws
Remote Control

TV Controls
Controls on the TV
3 4
SOURCE
MENU
CH+ CH-VOL+ VOL- POWER
SOURCE
MENU
CH+ CH-VOL+ VOL- POWER
TV Inputs & Outputs
3
100 100
1. After you load a disc, press to play the disc, and press twice to pause.
2. Press the button when the power is on the disc will eject, Press the button again to load the
disc automatically.
3. VOL(+) - This button increases the TV’s volume. If the OSD menu is active, pressing this button will
move the selection to the right.
4. VOL(-) - This button decreases the TV’s volume. If the On Screen Display(OSD) menu is active,
pressing this button will move the selection to the left.
5. CH(+) - This button performs the channel up function. If the OSD menu is active, this button functions
as up control for the menu.
6. CH(-) - This button performs the channel down function. If the OSD menu is active, this button
functions as down control for the menu.
7. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return
the selection to the previous menu level.
8. SOURCE - This button switches between all the different sources of the TV. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
9. POWER - Turn on the TV by pressing the button once. Press the button again to turn off the TV.
1. POWER (DC 12V) input
2. Earphone out: Output for headphones or head units such as RV Media Head Units with
TV input.
3. COAXIAL Out: Digital Audio output for Surround Sound amplifiers and other devices.
4. AV 1 Inputs: Composite Video & Audio (A/V) in. In this mode, the Green RCA jack acts
the Yellow Video input of AV in.
5. Y/Pb/Pr Input: Component Video in.
6. VGA Input: Connect to a computer’s VGA output jack.
7. HDMI 2 Input: HDMI 2 in.
8. USB: USB/Multimedia input.
9. HDMI 1 Input: HDMI 1 in.
10. PC Audio Input: Connect to the audio output jack on a computer.
11. RF Input: Connect to an external antenna to receive ATV/DTV TV signals
in ATV/DTV mode.
Rear Bottom
Rear Side
DC 12V
EARPHONE
OUT
COAXIAL
OUT VIDEO / YR L Pb Pr VGA HDMI 2
1 2 3 4 5 6 7
HDMI 1
PC
AUDIO
IN
RF
IN
USB
8 9 10 11

5 6
System Connection System Connection
NOTE: Please, make sure the inputs and outputs have firm connections before
connecting power.
1. COMPOSITE AV INPUT
Audio/video input: Use the SOURCE button to select AV on the remote control.
VGA O UTPU T
PC AUDIO
OUTPUT
VGA OUTPUT
2. PC INPUT
PC input: Use the SOURCE button on the remote control to select PC.
Video Cable Red/White/Yellow (Not supplied)
HDMI 1
PC
AUDIO
IN
RF
IN
USB
DC 12V
EARPH ON E
OUT
COAXI AL
OUT VID EO / YR L Pb Pr VGA HDM I 2
HDMI 1
PC
AUDIO
IN
RF
IN
USB
DC 12V
EARPH ON E
OUT
COAXI AL
OUT VID EO / YR L Pb Pr VGA HDM I 2
3. HDMI INPUT 1/2
HDMI input: Use the SOURCE button on the remote control to select HDMI 1 or 2
Source eg. Blu-ray, DVD, Satellite, camcorder etc
HDMI 1
4. YPbPr COMPONENT INPUT
Video component input: Use the SOURCE button on the remote control to select YPbPr.
This input consists of both Video (Green/Blue/Red) and Audio (Red/White)
YPb Pr
HDMI 1
PC
AUDIO
IN
RF
IN
USB
DC 12V
EARPH ON E
OUT
COAXI AL
OUT VID EO / YR L Pb Pr VGA HDM I 2
HDMI 1
PC
AUDIO
IN
RF
IN
USB
DC 12V
EARPH ON E
OUT
COAXI AL
OUT VID EO / YR L Pb Pr VGA HDM I 2
OR

8
System Connection
Remote Control
7. Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly.
75ohm coaxial cable
Antenna cable
Antenna lead with 75 ohm male PAL Connector
- Batteries should not be exposed to excessive heat such as direct
sunlight, fire or the like.
- If not being used for a period of time, please remove the batteries
from the remote in case of leakage.
- Do not mix old & new batteries together.
Installing Batteries
1Open the battery compartment
cover on the back of the remote.
2Insert two 1.5V AAA size batteries
using the correct polarity as shown.
Don’t mix old or used batteries with.
3Replace the cover.
Battery
Cover
2 x size AAA 1.5V
Battery
Cover
System Connection
new ones..
To use the remote control, point
it towards the remote sensor at
the front of the television. The
remote control has a range of up
to approximately seven meters
from the TV at an angle of up to
60 degrees.
5. COAXIAL OUTPUT
Allows connection of Digital audio systems and Surround Sound.
6. USB INPUT
Use the SOURCE button on the remote controller to select Media.
USB memory
COAXIAL Cable (Not supplied)
HDMI 1
PC
AUDIO
IN
RF
IN
USB
DC 12V
EARPH ON E
OUT
COAXI AL
OUT VID EO / YR L Pb Pr VGA HDM I 2
HDMI 1
PC
AUDIO
IN
RF
IN
USB
COAXIAL

9 10
Remote-Control Unit
Allows you to navigate the on‐screen menus and adjust the
system settings to your preference.
Press these two buttons to increase/decrease the volume.
Press to change the DTV or DVD audio language.
No. Button Description
POWER Turns the TV on or off to standby mode. 1
2MU TE Press to mute the sound. Press again to regain sound.
0‐9 Press 0‐9 to select a TV channel directly. The cannel will
change after 2 seconds.
3
4
5Return to the previously viewed program.
6
7
AUTO
8
9
P.MO DE
10
S. MO DE
11
12
Select the picture mode.
Select the sound mode.
EX IT
ME NU
Exit from the current menu or sub‐menu.
Allows you to navigate the on screen menus (OSD).
13
14 OK Select the option.
15
16 VOL+/‐
CH+/‐ Press these two buttons to change channels up/down.
AUD IO
17
18
AS PEC T Press this button to select the aspect ratio of the screen.
20
DI SP LAY Press to display the source and channel info.
25
26
27
28
Use for adjustments in PC mode.
Delete function button.
Rename function button.
Move function button.
Skip function button.
R (DELETE)
G (RENAME)
Y (MOVE)
B (SKIP)
29 FAV Selects favorite channel(s).
30
TE XT Switch on/off of Teletext window.
31
32
33
34
35
36
SU BTI TL E Press to select the subtitle language.
IN DE X Returns to Index page by Teletext.
RE VEAL Shows hidden words or pages by Teletext.
EP G Press to display E PG (Electronic Program Guide).
SO URCE Press to select signal the source for the TV.
QT
Eject/insert disc.
D.M EN U Quick Teletext navigation or setup settings / DVD: Video
DVD Menu button.
SE TU P DVD system setup.
D.D IS P Quick navigation during Teletext or setup settings / DV D: DVD
Information button.
TI ME SH IF T Press to switch to TIME S HI FT mode.
SL EE P Set the delay time for the T V to turn off automatically.
Press to record the program immediately.
REC/
37
38 TV/RADIO Press to switch between DTV and radio programs
21
22
23
24
Quick Tune. Quick TV Channel Autotune Button.
I/II
19
Select NICAM audio mode.
Only be available for T V programmers with N IC AM transmission,
and default mode is mono.
P.M ODE S .MODE AUTO
DI SPLAY SO URCE
EXIT MENU
AUDIO
REC.MENU
POWER MUTE
FAV EPG
HOLD
SUBTITLE
INDEX
REVEAL TEXT
SUBPAGE SIZE
REC
OK
QT
TIME SHIFT
ASPECT
TV/RADIO
CANCEL MIX
D.MENU SETUP D.DISP
A-B
REPEAT
I/II
SLEEP
REC.ME NU Press to switch to REC.ME NU immediately (DTV only).

11 12
OSD Menu Operation
Press SOURCE button to display the input source list.
Press the ▼/▲ buttons to select the input source you want
to watch,
Press the OK button to select the input source.
Press the MENU button to display the main menu. Press ◄ / ► to select from the following:
Channel, Picture, Sound, Time, Option and Lock sub menus. Press OK to select a specific
submenu. In the submenu, press ▼/▲ to select the next menu item.
Main Menus
No. Button Description
42
45
46
47
48
49
50
SI ZE Zoom In or Out of the Teletext window.
Play and Pause Media‐Player / DV D.
Stops playback Media‐Player and D VD.
Fast Rewind Media‐Player and D VD.
Fast Forward Media‐Player and DV D.
Plays the previous Media Player or DVD file/chapter.
Plays the next Media Player or DVD file/chapter..
Holds on the current Teletext page.
HO LD
Displays a sup‐page of upper Teletext options.
SU BPAGE
MI X Sets the transparency of Teletext window.
DVD: Repeat mode secection.
RE PEAT
40
41
43
44
39 CA NC EL Switches the Teletext window to the background; only the
current page no is visible. Source Selection

13 14
OSD Menu Operation
Channel Menu (when DTV is selected as the source)
OSD Menu Operation
Picture Menu
Auto Tuning
Press the ▼/▲ buttons to select Auto Tuning. After pressing the OK button, the auto tuning
interface will be displayed. Auto Tuning can also be activated by pressing the “QT” button
on the remote control while in DTV mode.
NOTE: If power has been disconnected from the TV, you may be required to select
“Australia” from the list of countries first before starting the Auto tune process.
DVB-T Manual Tuning
Press ▼/▲ buttons to select Manual Tuning and press OK button to show manual tuning list.
Using the ▼/▲ buttons, you can select the channel number or you can also use the number
keys to select a channel number, and then press OK button to start searching for the channel.
Programme Edit
Press ▼/▲ buttons to select Programme Edit, and then press the OK button to enter the
editing interface. By using the ▼/▲ buttons, you can select the channel number and start
editing according to the relevant selection.
LCN Sorting
Select LCN Sorting with▼/▲ buttons, and then press OK button. If LCN sorting is turned on,
DTV channels will be sorted by their Logical Sorting Number.
Software Update(USB)
Use this selection if a software update becomes available to update the TV’s operation.
Picture Mode
Press ▼/▲ buttons to select Picture mode, and go into next interface by pressing the OK
button. Then you can change picture mode to standard/mild/dynamic/personal
using the ▼/▲ buttons. Note that you can only adjust the Contrast, Brightness, Colour,
Sharpness & Tint settings when Personal is selected.
Colour Temp
Press ▼/▲ to select the Colour Temp menu item, and then the OK button to take you to next
menu where you can change Colour Temperature. Modes available are standard, warm,
cool and personal. You can alter colour temperature with the ▼/▲ buttons.
Noise Reduction
Press ▼/▲ to select the Noise Reduction menu option, and then the OK button to take you to
next menu. Then press the ▼/▲ buttons to select off/low/middle/high.
Other menu items
In the picture menu, other menu items can be adjusted in the same way. First, press ▼/▲ to
select the menu item. After pressing the OK button, you are able to change the setting with
the ▼/▲ buttons.
50
50
50
50
50

15 16
TIME MENUSOUND MENU
Sound Mode
Press the ▼/▲ buttons to select Sound Mode. Then press the OK button to select from a list
of sound modes. The sound mode can be switched between standard/music/movie/sports/
personal using ◄ / ► buttons.
EQ Settings
Equaliser (bass & treble) settings can only adjusted when the Sound Mode selection (above)
is set to “Personal”. Once this is set, Press ▼/▲ buttons to select the frequency you would
like to adjust:
120Hz Bass
500Hz Midbass
5KHz Midrange
10KHz Treble
Then use buttons to increase or decrease the setting.◄ / ►
Auto Volume (AVL)
This function when turned on will help even out the volume level between different A/V
sources so one is not greatly louder than another. It can also help reduce the volume of loud
TV ads compared to TV shows. The result depends greatly on the A/V source so this function
is set default to off. To turn AVL on, press ▼/▲ buttons to select Auto Volume and then press
OK. Press buttons to turn AVL on/off.◄ / ►
Surround Sound
Press ▼/▲ to select Surround Sound and then press OK button to go into the Sub menu.
With the◄ / ► buttons, surround sound can be switched between SRS TS XT/surround/ off
depending on the program source.
Other Menu Items
The rest of menu item can be altered by the same way. Press▼/▲ button to select the above
menu items and go into next interface with OK button. Then, press ◄ / ► buttons to adjust.
Clock
The clock and date is automatically programmed from information received from Digital TV
Channels. You should not need to use this sub-menu.
Off Time
Select Off Time with ▼/▲ buttons and press the OK button to enter the sub menu. In this
menu, you can select a specific time to turn the TV off.
On Time
Select On Time with ▼/▲ buttons and press the OK button to enter the sub menu. You can
first set the date of on time. Then the hour, minute, channel and volume can be altered to a
specific time.
Sleep Timer
Select Sleep Timer with ▼/▲ buttons and press the OK button. Then with buttons, the ◄ / ►
sleep timer can be set to OFF/10/20/30/60/90/120/180/240 minutes.
Auto sleep
Select Auto sleep with ▼/▲ button and press OK button. Then with buttons, select ◄ / ►
3,4 or 5 hours. The TV will turn off if there is no activity for this period of time.
OSD Menu Operation OSD Menu Operation

17 18
OPTION MENU
OSD Language
Press the ▼/▲ buttons to select OSD Language sub menu and select language with▼/▲
or buttons. Press the OK button to confirm then the menu button to return to the ◄ / ►
previous menu.
Audio Languages
Press ▼/▲ to select Audio Language and select language with▼/▲ or buttons. ◄ / ►
Press the OK button to confirm then the menu button to return to the previous menu.
Subtitle Languages
Press ▼/▲ to select Subtitle Language and select language with▼/▲ or buttons. ◄ / ►
Press the OK button to confirm then the menu button to return to the previous menu.
Hearing Impaired
Select Hearing Impaired (where supported) with ▼/▲ buttons and then press the OK button.
PVR File System
To check the status of the USB drive, format a drive or change the maximum record/time
shift setting, select PVR File System with ▼/▲ buttons and then press the OK button enter。
Reset
To return the TV to the Fatory Default settings, select Reset with ▼/▲ buttons and then
press the OK button.
Blue Screen
To have a Blue Screen rather than Black when no input signal is available, select Blue
Screen with ▼/▲ buttons and then press OK button to select on/off then the menu button to
return to the previous menu.
OSD Timer
Select OSD Timer (on screen menu display time) with the ▼/▲ buttons and then press OK
button. buttons to choose the specific time then the menu button to Press the ◄ / ►
return to the previous menu.
LOCK MENU
Lock System
Select System Lock with the ▼/▲ buttons and then enter the password (default is “0000") to
then access the Block Program or Parental Guidance menus.
SET Password
Select Set Password with▼/▲ buttons. Then press OK button to input the old password
(default is “0000” and then set a new password.
Block Program (DTV TV only, DTV must be selected as the source)
Select Block Program with ▼/▲ buttons, and press OK button. You can then add the
channels you wish to block.
Parental Guidance (DTV TV only, DTV must be selected as the source)
Select Parental Guidance with▼/▲ button, and then press the OK button. With the ◄ / ►
buttons, the parental guidance function can be turned on or off.
OSD Menu Operation OSD Menu Operation

HOTEL MODE - Useful for shop displays and volume restrictions etc.
OSD Menu Operation
Hotel Mode
Hotel model allows you to select a number of features that make this TV also useful for shop
displays, promotions or where you are after simple operation from one source.
Select Hotel Lock with the ▼/▲ buttons and then enter the password (default is “0000") then
use the buttons to turn this feature ON or OFF.◄ / ►
Key Lock
Select Set Password with▼/▲ buttons. Then press OK button to input the old password
(default is “0000” and then set a new password.
Source Setting
Select Block Program with ▼/▲ buttons, and press OK button. You can then add the
channels you wish to block.
Default Source
Select Parental Guidance with▼/▲ button, and then press the OK button.
With button, the parental guidance can be open or closed.◄ / ►
Default Prog
Select Set Password with▼/▲ buttons. Then press OK button to input the old password
(default is “0000” and then set a new password.
Max Volume
Select Block Program with ▼/▲ buttons, and press OK button. You can then add the
channels you wish to block.
Default Volume
Select Parental Guidance with▼/▲ button, and then press the OK button.
With button, the parental guidance can be open or closed.◄ / ►
EPG - Electronic Program Guide
OSD Menu Operation
Press the EPG button on the Remote control to access the Electronic Program Guide
(DTV only)
Record
Press the RED button on the remote control to enter the Recording
sub-menu. You can the channel, start and end times of the program
you want to record using the ▼/▲◄ / ►and buttons.
Info
Press the GREEN button on the remote to display detailed
information about the program.
Schedule
Press the YELLOW button on the remote to display the Schedule
List to display the programmes you have scheduled to record or
be reminded of.
Remind
Press the BLUE button on the remote control to set a reminder for a program youwould like
to watch at a later date.

Press the “MEDIA” button on the remote control to access this menu. You can also access
this menu by selecting “MEDIA” as a Source on the remote Control
Press buttons to select Photo/Music/Movie/Text , and then press ENTER button the ◄ / ►
to select. NOTE: A USB device must be inserted to use these functions.
OSD Menu Operation Media Operation
RECORD Live TV (DTV Only)
If you are watching DTV, you can press the Record button on the remote. The TV will •
display the recording control menu.
Stop Recording
Press the button to stop recording. The TV will display a confirmation message to stop
recording. Press ◄ on the remote to confirm.
When the storage space of the USB drive is full, the TV will display a warning message then
stop recording and return to normal broadcast Television.
Time Shift/Pause Live TV
While watching DTV, press the “TIME SHIFT” button on the remote control to Pause Live
TV plus bring up the time shift control menu. The time shift control menu is similar to the
Record menu and you can perform various functions such as exit time shift, or fast forward
to catch up to the live program etc.
Pressing the “TIME SHIFT” button again will continue the live program from where you
paused it (time shift).
Important: To display the Time Shift menu when the TV is either paused or on
Time Shift playback, press the “OK” button on the remote control.
PVR - Personal Video Recorder Functions
19
PHOTO VIEWER
1. Select Photo with the buttons, and then press the OK button to enter sub_menu.◄ / ►
2. Select C:\, then press the OK button to select the USB drive.
3. Select the specific photo, and press the (Play/Pause) button to view. This will also start
a slide-show of the images on the USB. Press the button to view the previous image,
press the button to view the next image.
4. Press the ENTER button to bring up an OSD display which provides more options such as
zoom, rotate etc.
5. Press the Red button to delete an image; the Exit button to return to the prev. media menu.

20
Media Operation (cont’d)
MUSIC PLAYBACK
VIDEO PLAYBACK
1. Select MOVIE with the buttons, and then press the OK button to enter sub_menu.◄ / ►
2. Select C:\, then press the OK button to select the USB drive.
3. Highlight the specific video. When highlighted, the file information will be displayed and
a preview of the video will start playing in the middle of the screen.
Press the (Play/Pause) button to start playback. Press to play the previous title,
press to play the next title.
Press the ENTER button during playback to bring up an OSD which provides options such
as Fast Foward, Rewind and repeating videos etc.
4. Press the RED button to delete the selected video title.
5. Press the Exit button to return to the previous Media Playback menu.
TEXT VIEWER
1. Select TEXT with the buttons, and then press the OK button to enter sub_menu.◄ / ►
2. Select C:\, then press the OK button to select the USB drive.
3. Select the specific file, and press the button to view, press the button to
play the previous file, press the button to play the next file.
4. Press the RED button to delete the selected file.
5. Press the Exit button to exit.
1. Select MUSIC with the buttons, and then press the OK button to enter sub_menu.◄ / ►
2. Select C:\, then press the OK button to select the USB drive.
3. Using the arrow keys, select the specific song to preview. Pressing the button will also
bring up an OSD display which provides more options such as Fast Forward, Rewind, Mute.
4. Press the button to play the next track or the button to play the previous track in
the initial MUSIC playback screen or OSD screen.
5. Press the Red button to delete a song, and the Exit button to return to the previous Media
Playback menu.

21 22
USB Multimedia Playback Formats Built-in DVD Player Operation

- - General Setup Page - -
TV Display
OSD Lang
Captions
Last Memory
Wide
Eng
Off
Off
Wide
Eng
Off
Off
- - General Setup Page - -
1. TV DISPLAY: Set the screen ratio
options are: Normal/PS (4:3 Pan Scan),
Nomal/PS (4:3 Letter Box) and Wide
(16:9). The default settings is wide.
2. OSD Lang: Set the OSD Language
options.
3. CAPTION: Play captions on supported
DVD titles, Options: ON/OFF.
4. LAST MEMORY: Play DVD from last
point. Options are: ON/OFF.
1. LT/RT: Logic Surround stereo
audio output. This matrix-based coding
process enables stereo audio tracks to
carry four channels (left, center, right
and surround) of audio data.
2. Stereo: Analog stereo audio output.
The player sends the subwoofer and
speech signals to the Tv’s speakers.
1. TV Type: The DVD player supports
output of various systems including
Multi, NTSC, PAL. The default setting is
PAL and this should not need to be changed.
2. Audio: DVD language selection options.
3. Subtitle: This player can display DVD
subtitle languages if supported by the DVD
disc. When playing DVD’s, you can hide the
subtitle or choose any of them as the current
subtitle language.
4. Disc menu: DVD Disc menu language
selection options.
5. PARENTAL This function disables
playback of specific DVD’s which may be
unsuitable for children.
Some DVDs are encoded with specific rating
levels. lf the rating level of the disc is higher
than that preset in this menu, playback of the
disc will be prohibited.
After selecting one of the PARENTAL codes,
the screen will display the PASSWORD page.
The default password is “8888".
6. PASSWORD [DVD only]: Allows you to
change the current PASSWORD.
7. Default: This option will return the DVD
to it’s factory default settings.
- - General Setup Page - -
STRSTR
- - General Setup Page - -
Downmix
Go To Spe aker Setup PageGo To Spe aker Setup Page
- - Preference Page - -
NTSC
Eng
Eng
Eng
NTSC
Eng
Eng
Eng
- - Preference Page - -
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Go To Pre ference PageGo To Preference Page
23 24
Built-in DVD Player Operation (Cont.)
INITIAL SETTINGS (DVD)
Built-in DVD Player Operation (Cont.)

Chapter
Title
All
O?
25 26
Built-in DVD Player Operation (Cont.) Built-in DVD Player Operation (Cont.)

27 28
Built-in DVD Player Operation (Cont.)
Cleaning and Maintenance

29 30
Troubleshooting Troubleshooting (Cont.)