Camorama CAMO-SP1 Guide

1
Start Guide
© CAMORAMA（USA）INC

2
1. Parts Overview
①PROTECTIVE CAP
②POWER BUTTON
③VIDEO RECORDING BUTTON
④WIFI ON/OFF BUTTON
⑤LENS
⑥MICROPHONE
⑦USB COVER
⑧1/4’’ UNIVERSAL SCREW
⑨RESET BUTTON / CHARGING INDICATOR LIGHT
⑩MICRO-USB SLOT FOR CHARGING AND DATA TRANSFER

3
2. Getting Started Guide
Charging
Please use the included USB to Micro USB cable to charge this device. A standard USB input of 5V / 2A is
required. The status LED will be red while charging; when the device reaches full charge, the status LED will
turn off.

4
3. Basic Usage Guide
(1) Power On/Off
Power On: Quickly press power button to turn on. Upon start up, music, power button light, video recording
button light, and three short vibrations will indicate that the camera is ready for use.
Power Off: Hold power button to shut down. Music and vibration will indicate that shutdown is complete. All
LED lights will turn off.
(2) WiFi On/Off
WiFi On: Press WiFi button to broadcast the camera WiFi network. The blue WiFi status LED light will turn
on.
WiFi Off: Press WiFi button to turn off the camera WiFi network. The blue WiFi status LED light will turn off.
If WiFi is on when the device is turned off, it will turn on automatically next time.
(3) Video/Picture Capture
This device has 4 shooting modes: single shot, continuous shooting, video shooting, and slow-motion video
shooting. The modes can be configured through the Camorama APP or Camorama Remote Control.
To take a single shot, press the video recording button . The camera will play a notification sound when the
pictures are taken.
To take a continuous shot, video or slow-motion video, press the video recording button . The camera will
play a notification sound and vibration when the recording starts and the blue LED will flash. Press the video
recording button again to stop the recording. The camera will play a notification sound and vibration, the blue
LED will stop flashing.

5
(4) Status LED Guide
① Power LED: Normal operation : Blue
Low battery: Red
②Recording LED: Normal operation: Blue
Video recording: Flashing Blue
Low storage or connected to the computer: Red
③WiFi LED: WiFi on: Blue
WiFi off: No light

6
4. Common Problem Solutions
•When the camera whose battery is not empty could neither be woken up nor work properly, hold the power
button for at least 15 seconds to force a shutdown. You can also press the reset button to reset the camera.
•The first time you connect your camera to WiFi via the Camorama APP, you need to set up an eight-digit
WiFi password. If you forget the WiFi password, please hold the WiFi on/off button for at least 15 seconds
until the device vibrates. Then, press the WiFi on/off button again to turn on WiFi with the password reset.
•Some phone models may not be able to play 4K videos, you can try to use 1920×1920 resolution.
•The camera is made to be water resistant; however, please do not submerge the camera under water
without proper waterproof protection.
•To protect the picture and video quality, please keep the lens clean. When cleaning the lens, use a microfiber
cloth to wipe the lens quickly and lightly in a clockwise motion.
•The camera has internal storage and does not need nor support Micro SD / TF Cards.
•The camera can be connected to the computer through the USB cable. Once connected, make sure the
camera is powered on. After the connection is successful, the recording button will turn red and the
“Camorama” logo will display on your computer. Using Camorama Panorama Player (PC) you can view your
photos and videos, you can also operate editing, copying, deleting etc.
•The camera has some built-in magnets, do not put the device close to easily magnetized items, such as
mechanical watches.
•It’s recommended to use the included USB to Micro USB cable to charge this device.
•Battery Maintenance: We do not recommend the camera in full or low battery conditions for a long time
without working. If the camera is unused for a long time, it is recommended that the camera is charge and
discharge every six months and keep the power around 50%.

7
•Our APP will constantly optimize and upgrade, the user manual will be updated accordingly. Please go to the
Download area of our official website (www.camorama.com) to download the newest version of electronic
manual.

8
5. Install Camorama APP, Panorama Player (PC)
•Install Camorama APP
Camorama APP is able to view, control, and set the camera status, and also to edit and to share panoramic
photos and videos. APP for mobile phone/tablet requirements: iPhone SE, iPhone 6s and above. iPad Air 2,
iPad Pro and above support 4k videos. Android phones also support 4k video playing. Scan the QR code
below to download and install the APP. You can also download the APP in Apple Store (for iPhones) and
Google Play (for Android phones), searching for keyword “Camorama”.
•Install Camorama Panorama Player (PC)
Camorama Panorama Player is used to play and edit panoramic videos on the PC. Player adapts Win7,
Win8, and Win10. It is recommended that the PC is more than 2.5G, Intel Core i5 CPU or above, memory
card 1G or above, and 4k video decoding graphic card.
Please go to the Download area of our official website (www.camorama.com) to download Camorama
Panorama Player.
APP Download QR Code

9
6. Camorama APP Operating Instructions
•Connect with the Camorama
Open the Camorama Application and click “Connect”. Follow the instructions to connect the Camorama WiFi.
When the connection is successful you will enter into the preview interface.
•Take a picture or a video
Click the middle red shooting button to control the shooting and to stop the shooting. Click the professional
settings icon to set the professional shooting parameters, click the shooting switch icon to switch the shooting
mode, click the settings icon to set up the parameters (such as resolution, frame rate, etc.)
Professional settings：Click the PRO icon to set the professional shooting parameters including Metering
Mode, ISO, Shutter (Exposure Time), Exposure Compensation, White Balance, and Backlight Compensation.
a. Metering Mode: support Spot, Center-weighted, Matrix and Average Metering. Spot Metering meters 2.5%
of the area at the center of the frame to meter; Center-weighted Metering uses the entire frame, but assigns
greater weight to the center of the frame; Matrix Metering selects a wide area of the screen to meter; Average
Start Page

10
metering is equally spaced in the screen by 64 or 128 regions, averaging 18% of the grayscale is considered
the correct exposure, giving the result of the aperture and shutter speed. b. ISO: set camera sensitivity. The
higher the sensitivity, the shorter the time required for exposure, and the more noise of the frame. c.
Shutter: set exposure time. Keep the camera static during exposure to avoid blurring the frame. d. Exposure
Compensation: change the recommended exposure setting on camera to make photos or videos brighter or
darker. e. White Balance: to ensure that colors in the photo are unaffected by colors in the light source. You
can choose a corresponding White Balance setting or customize your White Balance setting based on the light
source. f. Backlight Compensation: also known as backlight correction, can effectively compensate for the
camera in the backlight environment when shooting the main dark background defects.
Shooting Mode: Click the shooting switch icon to switch the shooting mode, there are four shooting modes
you can choose from, single picture shot, continuous shooting, video shooting, and slow-motion video
shooting.
Settings: Click the Settings icon to enter into the setting interface. You can set the speaker on / off,
vibration on / off, shooting mode and parameters, camera WiFi name, password, WiFi band (2.4G or 5G), the
current firmware version of the camera, the current APP version. The camera can be formatted. Important
photos and videos in the camera should be backed up before foramtted. You can connect the Remote Control,
disconnect and other operations. In the continuous mode, you can set the shooting time interval of 2 seconds,
5 seconds, 10 seconds; in the video mode, you can set the screen resolution of 2880×2880 (4K), 1920×1920,
1440×1440; in the slow-mo mode, you can set the shooting frame rate of 120fps, 210fps.
Notes : For more instructions, please click on the help button at the top right of the APP interface.

11
•Photo and Video Preview
Enter the camera album page, open the photo or video, click the mode switch icon for different mode change,
VR mode recommended to view with horizontal screen. Click the lens orientation icon to flip the screen
orientation. You can download the photos and videos from the camera album to the phone album.
Supports online 2 frames per second fast video preview，you can preview the captured content without
downloading the video to your phone. In a video, you can tap the screen with two fingers to capture a panoramic
photo of the video and share it to your social media networks. You can also tap the screen with one finger to
capture a screenshot and save it locally on your phone.
Settings Page
Shooting Modes
Review
Professional Setting

12
•Panoramic Photo/Video Editing
Camera Album
Phone Album
Photo Preview
Video Preview
Step 1: When browsing a
panoramic picture/video, click
Edit.
Step 2: Adjust the brightness,
saturation, contrast, hue and
add the filter.
Step 3: The beauty filter is
recommend. Click Save.

13
•Panoramic Photo sharing
You can share the panoramic photo to Facebook, Twitter, Instagram, Moments, WeChat, Sina microblogging
and other social media sites. Viewers can vote and comment on shared panoramic photos.
Step 1: When browsing a
panoramic picture, click Share.
Step 2: Select the cover, write
the title, click Share.
Step 3: Select the
corresponding social media.

14
•Panoramic Video Sharing
Open the panoramic video in the phone album, and click to share. There are three types of the videos you can
share, multi-view video, single-view video and panoramic video.
Multi-View Video Sharing：Edit and set the video, and save it to the mobile phone album. Enter the
album to share the video to YouTube, Facebook , WeChat, Youku and other social media sites.
Step 1: Click Share, then
select Multi-Viewport.
Step 2: Drag the process bar to select
the time period, select and set each
key frame’s viewing angle, zoom,
display mode.
Step 3: Click Settings to select whether
to add a video watermark, output video
resolution, and maximum duration.
Click Save.

15
Single-View Video Sharing：Edit and set the video, and save it to the mobile phone album. Enter the
album to share the video to YouTube, Facebook , WeChat, Youku and other social media sites.
Step 1: Click Share, then
select Single Viewport.
Step 2: Drag the process bar to select
the time period, drag the screen to
select the viewing angle, zoom, display
mode.
Step 3: Click Settings to select whether
to add a video watermark, output video
resolution, and maximum duration.
Click Save.

16
Panoramic Video Sharing：Cut appropriate time periods, and you can share the panoramic video to
Facebook, YouTube, Youku and other panoramic video sites or save it to the mobile phone album.
Step 1: Click Share, then
select Panoramic Video.
Step 2: Select the appropriate lens
orientation, cut multiple of time periods,
which automatically converge into one
panoramic video.
Step 3: Click Preview, click Share, and
select the corresponding social media.

17
Warranty Regulations
The after-sales service of this product is based on the relevant laws and regulations, detailed contents are as follows:
1. The warranty period of this product is one year from the date of purchase.
2. Within the warranty period, any device failure generated by normal use following the Instruction Manual (judged by company’s official
staff) will be repaired free of charge.
3. The following circumstances do not qualify for free repair within the warranty period:
(1) Failure or damage caused by improper usage as well as improper repair by yourself.
(2) Failure or damage caused by transport, move or falling etc. after purchase.
(3) After opening the camera yourself, the product is no longer insured.
(4) Failure or damage caused by other unavoidable external factors.
4. You can use our return or replacement service if this product shows performance faults within 7 days from the date of signing. This
will be identified and confirmed by our After-Sales service center.
5. The appearance of the product as well as accessories are not within the scope of warranty. This includes but is not limited to: camera
bag, USB cable, etc.

18
Product Qualification Certificate
Product Name: Camorama 4K Panoramic
Camera
Product Model: CAMO-SP1
Product warranty card
Product Name: Camorama 4K Panoramic Camera
Product Model: CAMO-SP1
Purchase Date: Year Month Day
Tel: [phone]
E-mail: [e-mail]
For more detailed information, please refer to:
www.camorama.com