Carrier 58CVX Operation manual

58CVA/CVX
INFINITYt80 VARIABLE SPEED
4-WAY MULTIPOISE FURNACE
Input Capacities: 70,000 thru 155,000 Btuh
Product Data
A04042
I NFINITY
IdealHumidity
THE INFINITYt80 GAS FURNACE
The Infinityt80 Variable--Speed, 4-way Multipoise Gas Furnaces
offer unmatched comfort with ComfortHeattand
IdealHumidityttechnologies in an 80% AFUE gas furnace. You
get all the benefits of a ComfortHeat technology furnace: reduced
drafts, reduced sound levels, longer cycles, less temperature swings
between cycles, and less temperature differences between rooms.
With the variable speed blower motor, homeowners can now
economically run constant fan to help eliminate temperature
differences throughout the house and to get better indoor air
quality. This furnace with IdealHumidityttechnology also
increases comfort in the summer by wringing out extra humidity
when needed. The Infinity 80 furnaces are approved for use with
natural or propane gas, and the 58CVX is also approved for use in
Low NOx Air Quality Management Districts.
Carrier InfinitytSystem When the Infinity 80 variable--speed
gas furnace is matched with the Infinity Control and an air
conditioner or heat pump, you will experience the ultimate in
ComfortHeat and IdealHumidity through unparalleled control of
temperature, humidity, indoor air quality, and zoning. The Carrier
Infinity System also provides unprecedented ease of use through
on--screen, text--based service reminders and equipment
malfunction alerts. For even greater comfort and convenience,
match the Infinity 80 furnace with an Infinity air conditioner or
heat pump. This will create a fully communicating system,
requiring only 4 thermostat wires between system components, and
troubleshooting can even be done in the future from the outdoor
unit without entering the home.
Optional remote access through telephone or Internet is also
available when combined with a remote connectivity kit.
STANDARD FEATURES
SInfinity System--match with the Infinity Control for Infinity
System benefits
SComfortHeat Technology Intelligent microprocessor control
STwo--stage heating with single--stage thermostat with patented
Adaptive Control Technology
SVery low operating sound through low-stage operation and
QuieTechtsystem
SIntegral part of the IdealHumidity System
Maximum dehumidification selection for summer time cooling
Full IdealHumidity benefits including “Super Dehumidify”
SmartEvapt--Humidity control when using a
Thermidistatt/Infinity control
SVariable-speed ECM blower motor
Increased SEER ratings for AC and HP systems as compared to
the Air Conditioning Heating and Refrigeration Institute’s
standard coil--only rating when paired with selected Carrier

2
evaporator coils.
Perfectly matches CFM to cooling system at all static points
SComfort Fant--Up to 12 cooling airflow selections from
thermostat with a wide range of capability
SHigh--Efficiency Media Filtration Cabinet included
SMicroprocessor based control center
LED diagnostics and self test feature
Stores fault codes during power outages
Adjustable heating air temperature rise
Adjustable cooling airflow
Dehumidification selection for summer-time cooling
S4-way Multipoise furnace, 13 vent applications
SCompact design -- only 33-1/3 in. (847 mm) tall
SPower HeattIgniter
SDraft Safeguard switch to ensure proper furnace venting
SInsulated blower compartment
SInner door for tighter sealing
SHYBRID HEATrDual Fuel System compatible
SAll models are chimney friendly when used with accessory vent
kit
SResidential installations eligible for consumer financing through
the Retail Credit Program
HEAT EXCHANGER CONTROL BOARD INDUCER BLOWER
A02215
A02169 A02170
MODEL NUMBER NOMENCLATURE
58CVA 070 100 12
58CVA Variable Speed 4-Way Multipoise Nominal Cooling Size
58CVX Low NOx Version (Airflow at .5 ESP.)
(400 CFM per 12,000 Btuh)
12---1200 CFM
16---1600 CFM
20---2000 CFM
22---2200 CFM
Input Capacity
070---66,000 Btuh 135---132,000 Btuh
090---88,000 Btuh 155---154,000 Btuh
110---110,000 Btuh Series Number
58CVA/CVX

3
FURNACE COMPONENTS
INDUCER MOTOR
ASSEMBLY
PRESSURE
SWITCHES
FLUE
COLLECTOR
BOX
GAS VALVE
HOT SURFACE
IGNITER
MANUAL RESET
LIMIT SWITCHES
CONTROL
VENT ELBOW*
MAIN LIMIT SWITCH
(BEHIND GAS VALVE)
DRAFT
SAFEGUARD
SWITCH
BLOWER AND
MOTOR
RATING PLATE
NOT SHOWN
(LOCATED ON
BLOWER DOOR)
GAS MANIFOLD
GAS BURNER
BLOWER DOOR
SAFETY SWITCH
FLAME SENSOR
*Elbow may be turned to a dierent position, depending on type of installation.
A04137
NOTE: The 58CVA/CVX furnaces are factory shipped for use with natural gas. These furnaces can be field--converted for propane gas with
a factory--authorized and listed accessory conversion kit.
58CVA/CVX

4
CARRIER ACCESSORIES
CONTROLS:
THERMOSTATS
AND ZONING
Available in programmable and
non-programmable models, Carrier
thermostats maintain a constant, comfortable
temperature level in the home.
For the ultimate in home comfort, Carrier’s
2, 4, and 8-zone systems allow temperature
control of individual “zones” of the home.
This is accomplished through a series of
electronic dampers and remote room sensors.
InfinitytControl shown.
A03149
MECHANICAL
OR ELECTRONIC
AIR CLEANER
Cleans the air of smoke, dirt, and
many pollens commonly found.
Saves decorating and cleaning
expenses by keeping carpets,
furniture, and drapes cleaner.
Electronic air cleaner is shown.
C04008
A01484
MODEL HUMCCLFP
HUMIDIFIER
By adding moisture to winter-dry
air, a Carrier humidifier can often
improve comfort and keep
furniture, rugs, and draperies in
better condition. Moisturizing
household air also helps to retain
normal body heat and provides
comfort at lower temperatures.
58CVA/CVX

5
CARRIER ACCESSORIES
DESCRIPTION
ELECTRONIC AIR CLEANER (EAC) Model EACB
MECHANICAL AIR CLEANER Models EZXCAB, FILCAB
HUMIDIFIER Model HUM
HEAT RECOVERY VENTILATOR Model HRV
ENERGY RECOVERY VENTILATOR Model ERV
UV LIGHTS Model UVL
T H E R M O S T A T ---
NON-PROGRAMMABLE
Fo r u s e w i t h 1 - s p e e d A i r C o n d i t i o n e r --- d e g . F / C , A u t o C h a n g e o v e r --- T P --- N A C , T C --- N A C
Fo r u s e w i t h 1 - s p e e d H e a t P u m p --- de g . F / C , A u t o C h a n g e o v e r --- T P --- N H P, T C --- N H P *
Fo r u s e w i t h 2 - s p e e d A i r C o n d i t i o n e r --- d e g . F / C , A u t o C h a n g e o v e r --- T P --- N R H *
For use with multi-use / stage configurations --- deg. F/C, Auto Changeover/Temperature and Humidity
C o n t r o l --- T P --- P R H {
T H E R M O S T A T ---
PROGRAMMABLE
For use with 1-speed Air Conditioner --- deg. F/C, Auto Changeover, 7-Day Programmable ---
T P --- PA C
For use with 1-speed Heat Pump --- deg. F/C, Auto Changeover, 7-Day Programmable ---
TP---PHP*
For use with 2-speed Air Conditioner --- deg. F/C, Auto Changeover, 7-Day Programmable ---
T P --- P R H *
Fo r u s e w i t h 1 - s p e e d A i r C o n d i t i o n e r --- d e g . F / C , 5 --- 2 D a y P r o g r a m m a b l e --- T P --- PA C
Fo r u s e w i t h m u l t i - s t a g e a p pl i c a t i o n s --- d e g . F / C, A u t o C h a n g e o v e r, 7 - D a y P r o gr a m m a b l e --- T C --- P H P }
For multi-use / stage configurations --- deg. F/C, Auto Changeover, 7-Day Programmable/Temperature and
H u m i d i t y C o n t r o l --- T P --- P R H {
ZONING CONTROL
Comfort™ Series 3-Zone Kit --- ZONECC3ZAC01, ZONECC3ZHP01
2 Performance™ Series ComfortZone™ II Zoning/Temperature and Humidity Control --- ZONECC2KIT01---B
4 Performance™ Series ComfortZone™ II Zoning/Temperature and Humidity Control --- ZONECC4KIT01---B
8 Performance™ Series ComfortZone™ II Zoning/Temperature and Humidity Control --- ZONECC8KIT01---B
InfinitytControl Deluxe 7-Day Programmable (Wall-mounted system control.) --- SYSTXCCUID01
InfinitytControl Deluxe Zoning 7-Day Programmable (Wall-mounted control for a
multi-zone system.) --- SYSTXCCUIZ01
Infinityt4-Zone Damper Control Module (Wall-mounted for a 4-zone system.) --- SYSTXCC4ZC02
InfinitytSmart Sensor (Optional wall control used to monitor temperature and/or fan control in
an individual zone.) --- SYSTXCCSMS01
InfinitytRemote Room Sensor (Monitors temperature in an individual zone.) --- SYSTXCCRRS01
InfinitytSystem Access Module (Hardware for wireless access and control via phone or internet.) ---
SYSTXCCSAM01
InfinitytNetwork Interface Module (Connects Heat Recovery and Energy Recovery Ventilators or older
two-speed outdoor models to system.) --- SYSTCCNIM01††
Decorative Back Plate for Infinity Control (Decorative wall plate.) SYSTXXXBPU01
*Model HP and 2S thermostat must be field converted to air conditioner operation.
† Thermidistat Control can be configured for multiple use and staging, it must be configured for each specific application.
}Dual Fuel thermostat is used with furnace and heat pump application.
** When applied with Carrier’s IdealHumidity™ series 58CVA/CVX and FE Indoor Models
†† Must be installed in Dual --- Fuel Infinity system applications
58CVA/CVX

6
CARRIER ACCESSORIES
DESCRIPTION PART NO. 070 --- 12 090 --- 16 110 --- 20 135--- 22 155 --- 22
Cartridge Media Filter
FILCCCAR0016 X X
FILCCCAR0020 X
FILCCCAR0024 X X
EZ Flex Media Filter with End Caps
EXPXXUNV0016 X X
EXPXXUNV0020 X
EXPXXUNV0024 X X
Replacement EZ Flex Filter Media
EXPXXFIL0016 X X
EXPXXFIL0020 X
EXPXXFIL0024 X X
External Bottom Return Filter Rack
KBAFR0401B14 X
KGAFR0501B17 X
KGAFR0601B21 X
KGAFR0701B24 X X
External Side Return Filter Rack KGAFR0801SRE X X X X X
Unframed Filter 3/4-in. (19 mm)
KGAWF1301UFR† S S
KGAWF1401UFR S
KGAWF1501UFR S S
KGAWF1306UFR† X X
KGAWF1406UFR X
KGAWF1506UFR X X
Flue Extension KGAFE0112UPH X X X X X
Combustible Floor Base KGASB0201ALL X X X X X
Downflow Vent Guard KGAVG0101DFG X X X X X
Vent Extension Kit KGAVE0101DNH X X X X X
Chimney Adapter Kit KGACA02014FC XXX
Chimney Adapter Kit KGACA02015FC X X
Natural-to-Propane Conversion Kit* KGANP4601ALL X X X X X
Propane-to-Natural Conversion Kit KGAPN3901ALL X X X X X
Label Kit KGALB0101KIT X X X X X
Air Leakage Kit (Qty 10) KGBAC0110DGK X X X X X
ECM Motor Simulator KGASD0301FMS X X X X X
Advanced Product Monitor KGAFP0301APM X X X X X
Gas Orifice Kit (Qty 50)
KGAHA0150N42
See Installation Instructions for model,
altitude, and heat value usages.
KGAHA0250N43
(factory supplied)
KGAHA0350N44
KGAHA0450N45
KGAHA0550N46
KGAHA1550N47
KGAHA1650N48
KGAHA0650P54
KGAHA0750P55
KGAHA0850P56
KGAHA5750125
KGAHA5750130
* Factory-authorized and field installed. Fuel conversion kits are AGA/CGA recognized.
† Suitable for Side Return Filter Rack (KGAFR0801SRE)
X = Accessory
S= Standard
58CVA/CVX

7
PHYSICAL DATA
UNIT SIZE 070-12 090-16 110-20 135-22 155-22
OUTPUT CAPACITY BTUH*
(Nonweatherized ICS) †
All 58CVA; 58CVX Upflow High 54,000 71,000 89,000 107,000 125,000
Low 35,000 47,000 59,000 70,000 82,000
58CVX Downflow/Horizontal High 51,000 68,000 85,000 102,000 119,000
Low 35,000 47,000 59,000 70,000 82,000
INPUT BTUH*
58CVX Upflow; all 58CVA High 66,000 88,000 110,000 132,000 154,000
Low 43,500 58,000 72,500 87,000 101,500
58CVX Downflow/Horizontal HIgh 63,000 84,000 105,000 126,000 147,000
Low 43,500 58,000 72,500 87,000 101,500
SHIPPING WEIGHT --- LB (KG) 127 (58) 151 (68) 162 (73) 177 (80) 183 (83)
CERTIFIED TEMP RISE RANGE --- ° F (° C)
High 30---60
( 1 7 --- 3 3 )
40---70
( 2 2 --- 3 9 )
40---70
( 2 2 --- 3 9 )
40---70
( 2 2 --- 3 9 )
45---75
( 2 5 --- 4 2 )
Low 30---60
( 1 7 --- 3 3 )
30---60
( 1 7 --- 3 3 )
25---55
( 1 4 --- 3 0 )
25---55
( 1 4 --- 3 0 )
30---60
( 1 7 --- 3 3 )
CERTIFIED EXT
STATIC PRESSURE IN. WC
Heating High 0.12 0.15 0.20 0.20 0.20
Cooling Low 0.5 0.5 0.5 0.5 0.5
AIRFLOW CFM‡
Heating--- High/Low 1180/735 1210/985 1475/1320 1915/1700 1970/1715
Cooling 1225 1400 2095 2100 2095
AFUE%* Nonweatherized ICS 80.0 80.0 80.0 80.0 80.0
LIMIT CONTROL SPST
HEATING BLOWER CONTROL Solid-State Time Operation
BURNERS (Monoport) 2 2 3 3 3 4 4
GAS CONNECTION SIZE 1 / 2 --- i n . N P T
GAS VALVE (Redundant) Manufacturer White-Rodgers
Minimum Inlet Pressure (In. wc) 4.5 (Natural Gas)
Maximum Inlet Pressure (In. wc) 13.6 (Natural Gas)
IGNITION DEVICE Hot Surface
* Gas input ratings are certified for elevations to 2000 ft. (610 M). In USA, for elevations above 2000 ft. (610 M), reduce ratings 4 percent for each 1000 ft. (305
M) above sea level. Refer to National Fuel Gas Code NFPA 54/ANSI Z223.1---2006 Table F.1 (d) or furnace Installation Instructions. In Canada, derate the
unit 10 percent for elevations 2000 to 4500 ft. (610 to 1372 M) above sea level.
† Capacity in accordance with U.S. Government DOE test procedures.
‡ Airflow shown is for bottom only return ---air supply in comfort mode (as shipped). For air delivery above 1800 CFM, see Air Delivery Table for other options.
A filter is required for each return-air supply.
ICS — Isolated Combustion System
BLOWER PERFORMANCE DATA
UNIT SIZE 070-12 090-16 110-20 135-22 155-22
DIRECT---DRIVE MOTOR Hp (PSC) 1/2 1/2 1 1 1
MOTOR FULL LOAD AMPS 7.7 7.7 12.8 12.8 12.8
RPM (Nominal) 300-1300 300-1300 300-1300 300-1300 300-1300
BLOWER WHEEL DIAMETER X WIDTHS --- IN. (MM) 10 x 6
(254 x 152)
10 x 8
(254 x 203)
11 x 10
(279 x 254)
11 x 11
(279 x 279)
11 x 11
(279 x 279)
ECM---Electronically Commutated Motor, Variable Speed
58CVA/CVX

8
A02058
SEE NOTES: 1,2,4,7,8,9
UPFLOW
SEE NOTES: 1,2,3,4,7,8,9
UPFLOW
SEE NOTES: 1,2,4,5,7,8,9
DOWNFLOW
A02059 A02061
SEE NOTES:1,2,3,4,5,7,8,9
DOWNFLOW
SEE NOTES: 1,2,3,4,5,7,8,9
DOWNFLOW
SEE NOTES: 1,2,4,5,6,7,8,9
DOWNFLOW
A02060 A02063 A02062
Venting Notes
1. For common vent, vent connector sizing and vent material: United States, latest edition of the National Fuel Gas
Code (NFGC), ANSI Z223.1/NFPA 54. In Canada, latest edition of the National Standards of Canada, Natural Gas
and Propane Installation Code (NSCNGPIC), CSA B149.1.
2. Immediately increase to 5-in. (127 mm) vent connector outside furnace casing when 5-in. (127 mm) vent connector
required, refer to Note 1.
3. Side outlet vent for upflow and downflow installations must use Type B vent immediately after exiting the furnace,
except when KGAVG0101DFG is used in downflow position.
4. Type B vent where required, refer to Note 1.
5. 4--- in. (102 mm) single wall vent must be used inside furnace casing and the KGAVG0101DFG Downflow Vent Guard
Kit.
6. Accessory Downflow Vent Guard Kit, KGAVG0101DFG required in downflow installations with bottom vent
configuration.
7. Chimney Adapter Kit required for exterior masonry chimney applications. Refer to Chimney Adapter Kit,
KGACA02014FC and KGACA02015FC for sizing and complete application details.
8. Secure vent connector to furnace elbow with (2) corrosion-resistant sheet metal screws, space approximately 180°
apart.
9. Secure all other single wall vent connector joints with (3) corrosion-resistant screws spaced approximately 120°
apart. Secure Type B vent connectors per vent connector manufacturer’s recommendations.
58CVA/CVX

9
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL RIGHT
A02068
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL RIGHT
A02070
SEE NOTES: 1,2,4,7,8,9
HORIZONTAL RIGHT A02069
SEE NOTES: 1,2,4,7,8,9
HORIZONTAL LEFT A02064
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL LEFT A02065
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL LEFT
A02066
SEE NOTES: 1,2,4,5,7,8,9
HORIZONTAL LEFT
A02067
58CVA/CVX

10
AIR DELIVERY -- CFM (With Filter)*
Unit Size Operating Mode
CFM
Airflow
Setting
External
Static
Pressure
Range*
(in. wc)
External Static Pressure (ESP) (IN WC)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
070---12 AIRFLOW (CFM)
†† Low Heat 735 (615)† 0---0.50 735 735 735 735 725
High Heat 1180 (1060)† 0 --- 1 . 0 1160 1165 1175 1180 1180 1180 1180 1180 1180 1175
†† 1 --- 1 / 2 --- To n C o o l i n g 525 0---0.50‡ 515 500 500 490 485
†† 2 --- To n A/ C C o o l i n g 700 0---0.50‡ 690 680 675 680 675
2 --- 1 / 2 --- To n A / C C o o l i n g 875 0---1.0‡ 875 875 875 870 865 855 850 835 825 820
3 --- To n A/ C C o o l i n g 1050 0---1.0‡ 1050 1050 1050 1050 1050 1050 1045 1035 1020 1000
3 --- 1 / 2 --- To n A / C C o o l i n g 1225 0 --- 1 . 0 1220 1225 1225 1225 1225 1220 1205 1190 1185 1170
Maximum 1400 0 --- 1 . 0 1395 1400 1400 1400 1395 1385 1370 1340 1300 1245
090---16
Low Heat 985 (825)† 0 --- 1 . 0 950 970 985 985 985 985 985 985 985 980
High Heat 1210 (1090)† 0 --- 1 . 0 1190 1205 1210 1210 1210 1210 1210 1210 1210 1200
†† 1 --- 1 / 2 --- To n A / C C o o l i n g 525 0---0.50‡ 525 520 525 495 475
†† 2 --- To n A/ C C o o l i n g 700 0---0.50‡ 680 680 680 675 670
2 --- 1 / 2 --- To n A / C C o o l i n g 875 0---1.0‡ 815 845 845 855 850 850 845 835 820 805
3 --- To n A/ C C o o l i n g 1050 0---1.0‡ 1005 1005 1015 1035 1040 1040 1035 1030 1025 1010
3 --- 1 / 2 --- To n A / C C o o l i n g 1225 0 --- 1 . 0 1190 1200 1200 1205 1205 1215 1205 1200 1185 1170
4 --- To n A/ C C o o l i n g 1400 0 --- 1 . 0 1350 1370 1390 1390 1400 1390 1380 1380 1360 1340
Maximum 1600 0 --- 1 . 0 1595 1600 1600 1600 1595 1555 1505 1465 1430 1390
110---20***
Low Heat 1320 (1110)† 0 --- 1 . 0 1275 1295 1315 1320 1320 1320 1320 1320 1320 1315
High Heat 1475 (1330)† 0 --- 1 . 0 1460 1465 1475 1475 1475 1475 1475 1475 1465 1465
†† 2 --- To n A/ C C o o l i n g 700 0---0.50‡ 700 700 700 700 700
†† 2 --- 1 / 2 --- To n A / C C o o l i n g 875 0---0.50‡ 875 875 875 875 875
†† 3 --- To n A/ C C o o l i n g 1050 0---0.50‡ 1050 1050 1050 1050 1050
3 --- 1 / 2 --- To n A / C C o o l i n g 1225 0---1.0‡ 1225 1225 1225 1225 1225 1225 1225 1225 1225 1225
4 --- To n A/ C C o o l i n g 1400 0---1.0‡ 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400
5 --- To n A/ C C o o l i n g 1750 0---1.0‡ 1750 1750 1750 1750 1750 1750 1750 1750 1740 1725
6 --- To n A/ C C o o l i n g 2100 0 --- 1 . 0 2100 2100 2100 2100 2090 2075 2055 2040 2005 1970
Maximum 2200 0 --- 1 . 0 2200 2190 2190 2180 2155 2145 2125 2100 2080 2020
135---22
Low Heat 1700 (1430)† 0 --- 1 . 0 1700 1700 1700 1700 1700 1695 1700 1695 1685 1670
High Heat 1915 (1725)† 0 --- 1 . 0 1900 1905 1915 1915 1915 1915 1915 1915 1915 1915
†† 2 --- To n A/ C C o o l i n g 700 0---0.50‡ 700 700 700 700 665
†† 2 --- 1 / 2 --- To n A / C C o o l i n g 875 0---0.50‡ 870 870 865 865 865
†† 3 --- To n A/ C C o o l i n g 1050 0---0.50‡ 1010 1030 1050 1050 1050
3 --- 1 / 2 --- To n A / C C o o l i n g 1225 0---1.0‡ 1155 1180 1200 1210 1220 1225 1225 1225 1225 1225
4 --- To n A/ C C o o l i n g 1400 0---1.0‡ 1395 1400 1400 1400 1400 1400 1400 1390 1375 1355
5 --- To n A/ C C o o l i n g 1750 0---1.0‡ 1740 1750 1750 1750 1735 1740 1735 1730 1715 1700
6 --- To n A/ C C o o l i n g 2100 0 --- 1 . 0 2075 2085 2090 2100 2100 2100 2090 2080 2055 2025
Maximum 2200 0 --- 1 . 0 2180 2195 2200 2200 2200 2200 2185 2165 2140 2095
155---22
Low Heat 1715 (1440)† 0 --- 1 . 0 1715 1715 1715 1715 1715 1705 1710 1705 1705 1695
High Heat 1970 (1775)† 0 --- 1 . 0 1955 1965 1965 1970 1970 1970 1970 1970 1970 1960
†† 2 --- To n A/ C C o o l i n g 700 0---0.50‡ 700 700 700 700 680
†† 2 --- 1 / 2 --- To n A / C C o o l i n g 875 0---0.50‡ 865 875 875 865 865
†† 3 --- To n A/ C C o o l i n g 1050 0---0.50‡ 1015 1020 1035 1045 1050
3 --- 1 / 2 --- To n A / C C o o l i n g 1225 0---1.0‡ 1160 1185 1215 1225 1225 1225 1225 1225 1225 1225
4 --- To n A/ C C o o l i n g 1400 0---1.0‡ 1385 1400 1400 1400 1400 1400 1395 1395 1380 1360
5 --- To n A/ C C o o l i n g 1750 0---1.0‡ 1745 1750 1750 1750 1745 1740 1745 1745 1740 1735
6 --- To n A/ C C o o l i n g 2100 0 --- 1 . 0 2055 2070 2080 2085 2095 2100 2100 2100 2090 2065
Maximum 2200 0 --- 1 . 0 2175 2190 2200 2200 2200 2200 2200 2200 2180 2160
*Actual external static pressure (ESP) can be determined by using the fan laws (CFM 2 proportional to ESP); such as, a system with 1180 CFM
at 0.5 ESP would operate at cooling airflow of 1050 CFM at 0.4 ESP and low---heating airflow of 735 CFM at 0.19 ESP.
{Comfort airflow values are shown in parenthesis. Comfort airflow is selected when the low--- heat rise adjustment switch (SW1--- 3) is OFF and
the comfort/efficiency switch (SW1--- 4) is ON.
}Ductwork must be sized for high--- heating CFM within the operational range of ESP.
**Wattage data provided is for the circulating blower with bottom return and does not include draft inducer, accessories, or gas controls.
{{Operation within the blank areas of the chart is not recommended because high--- heat operation will be above 1.0 ESP.
***All airflows on 110 size furnace are 5% less on side return only installations.
58CVA/CVX

11
DIMENSIONS
2-7/16"
1-1/8"
28-7/8"
(733mm)
25-1/4"
22-9/16"
JUNCTION BOX
LOCATION
7/8" DIA
ACCESSORY 1/2" (13 mm) DIA.
THERMOSTAT WIRE ENTRY
3-15/16" (84mm)
LEFT HAND GAS
ENTRY
33-5/16" 24-7/8"
5-1/2"
7/8" (22mm) DIA.
ACCESSORY
11/16"
21-5/8"
BOTTOM INLET 1-11/16"
13/16"
11/16"
4-13/16"
AIRFLOW
19"
OUTLET
13/16"
11/16"
8-9/16"
VENT OUTLET
5 PLACES (TYP)
3-3/4"
1-3/4" DIA.RIGHT HAND
GAS ENTRY
7/8" DIA. K.O. WIRE ENTRY
SIDE INLET
14-7/8"
7/8" DIA. ACCESSORY
1-1/4"
1"
22-1/16"
A
D
F
E
(FLUE COLLAR)
5-15/16"
(135mm)
24"
CASING
1-5/16"
1/2" DIA. K.O.THERMOSTAT
WIRE ENTRY
ALTERNAT E
JUNCTION BOX
LOCATIONS (TYP)
26-1/8"
1-1/2"
7-3/4" 9-5/8"
11-1/2"
5-1/2"
(664mm)
(641mm)
(573mm)
(22mm)
(846mm)
(17mm) (549mm)
(
610mm
)
(43mm)
(140mm)
(632mm)
(17mm)
(140mm)
(95mm)
(21mm)
(122mm)
(217mm)
(62mm)
(33mm)
(29mm) (483mm)
(13mm)
(44mm)
(22mm)
(22mm)
(38mm)
(560mm)
(25mm)
(32mm)
(378mm)
(17mm)
(197mm)
(244mm)
(292mm)
(21mm)
A04037
NOTES:
1. Two additional 7/8 ---in. (22 mm) diameter holes are located in the top plate.
2. Minimum return---air openings at furnace, based on metal duct. If flex duct is used, see flex duct manufacturer’s recommendations for equivalent diameters.
a. For 800 CFM---16 ---in. (406 mm) round or 14 1/2 x 12 ---in. (368 x 305 mm) rectangle.
b. For 1200 CFM---20---in. (508 mm) round or 14 1/2 x 19 1/2---in. (368 x 495 mm) rectangle.
c. For 1600 CFM---22---in. (559 mm) round or 14 1/2 x 22 1/16---in. (368 x 560mm) rectangle.
d. For airflow requirements above 1800 CFM, see Air Delivery table in Product Data literature for specific use of single side inlets. The use of both sideinlets,a
combination of 1 side and the bottom, or the bottom only will ensure adequate return air openings for airflow requirements above 1800 CFM.
FURNACE SIZE
A
CABINET
WIDTH
IN. (mm)
D
SUPPLY ---
AIR WIDTH
IN. (mm)
E
RETURN---
AIR WIDTH
IN. (mm)
F
CENTER LINE TOP AND
BOTTOM FLUE
COLLAR
IN. (mm)
FLUE
COLLAR*
IN. (mm)
SHIPPING
WT.
LB (KG)
FILTER
MEDIA
CABINET
SIZE
IN. (mm)
070---12 14---3/16
(360)
12---9/16
(319)
12---11/16
(322) 9---5/16 (237) 4 (102) 127 (58) 16 (406)
090---16 17---1/2
(445)
15---7/8
(403)
16---1/8
(410) 11---9/16 (294) 4 (102) 151 (68) 16 (406)
110---20 21 (533) 19---3/8
(492)
19---1/2
(495) 13---5/16 (338) 4 (102) 163 (74) 20 (508)
135---22 24---1/2
(622)
22---7/8
(581) 23 (584) 15---1/16 (383) 4 (102)† 177 (80) 24 (610)
155---22 24---1/2
(622)
22---7/8
(581) 23 (584) 15---1/16 (383) 4 (102)† 183 (83) 24 (610)
*5 in. or 6 in. (127 or 152 mm) vent connector may be required in some cases.
{5 in. (127 mm) or larger vent is required. Use a 4---5 (102---127 mm) or 4 ---6 in. (102---152 mm) vent adapter between furnace and vent connector.
A
Media/
Filter Cabinet
AB C
16" (406 mm) 17" (432) 16 1
/
4"(413) 15" (381)
20" (508 mm) 21" (533) 20 1
/
4"(514) 19" (483)
24" (610 mm) 25" (635) 24 1
/
4"(616) 23" (584)
23
5
/
8 "
23
3
/
8 "
Furnace Side
23
3
/
4 "
Centerline Screw Slots
25
5
/
8 "
Duct Side
24
1
/
2 "
With Flanges Bent Out
23
1
/
8 "Opening
5
3
/
4 "
C Opening
with Flanges Bent In
B
(600 mm)
(594 mm)
(603 mm)
(146 mm)
(651 mm)
(622 mm)
(587 mm)
58CVA/CVX

12
A08471
58CVA/CVX

13
TYPICAL WIRING SCHEMATIC
A95236
ELECTRICAL DATA
UNIT SIZE VOLTS HERTZ
PHASE
OPERATING
VOLTAGE RANGE MAXIMUM
UNIT AMPS
MAXIMUM
WIRE
LENGTH
FT (M)‡
MAXIMUM
FUSE OR CKT
BKR AMPS†
MINIMUM
WIRE GAGE
Maximum* Minimum*
070-12 115-60-1 127 104 9.0 30 (9.1) 15 14
090-16 115-60-1 127 104 9.6 29 (8.8) 15 14
110-20 115-60-1 127 104 15.1 29 (8.8) 20 12
135-22 115-60-1 127 104 14.9 30 (9.1) 20 12
155-22 115-60-1 127 104 15.0 29 (8.8) 20 12
* Permissible limits of the voltage range at which unit operates satisfactorily.
† Time---delay type is recommended.
‡ Length shown is as measured one way along wire path between unit and service panel for maximum 2 percent voltage drop.
58CVA/CVX

14
TYPICAL INSTALLATION
CONDENSING
UNIT
AIRFLOW
ELECTRONIC
AIR CLEANER
GAS-FIRED
WATER HEATER
HUMIDIFIER
A02184
58CVA/CVX

15
58CVA/CVX

16
GUIDE SPECIFICATIONS
Gas Furnace
58CVA/CVX
General
SYSTEM DESCRIPTION
Furnish a _________________ Variable speed gas-fired
furnace for use with natural gas or propane (factory
authorized conversion kit required for propane); furnish
cold air return plenum; furnish external medial cabinet for
use with accessory media filter or standard filter.
QUALITY ASSURANCE
Unit will be designed, tested and constructed to the
current ANSI Z 21.47/CSA 2.3 design standard for
gas-fired central furnaces. Unit will be 3rd party certified
by CSA to the current ANSI Z 21.47/CSA 2.3 design
standard for gas-fired central furnaces.
Unit will carry the CSA Blue StarRand Blue FlameR
labels.
Unit efficiency testing will be performed per the current
DOE test procedure as listed in the Federal Register.
Unit will be certified for capacity and efficiency and
listed in the latest GAMA Consumer’s Directory of
Certified Efficiency Ratings.
Unit shall carry the current Federal Trade Commission
Energy Guide efficiency label.
DELIVERY, STORAGE AND HANDLING
Unit shall be shipped as single package only and is
stored and handled per unit manufacturer’s
recommendations.
WARRANTY (for inclusion by specifying engineer)
U.S. and Canada only. Warranty certificate available
upon request.
Products
EQUIPMENT
Components shall include: slow-opening two-stage dual
fuel gas valve to reduce ignition noise, regulate gas flow,
with electric switch gas shut-off; flame proving sensor, hot
surface igniter, dual pressure switch assembly, flame
rollout switch, ICM blower and two speed inducer
assembly, 40va transformer; low-voltage (heating)
(heating/cooling) thermostat.
Blower Wheel and ECM Blower Motor
Galvanized blower wheel shall be centrifugal type,
statically and dynamically balanced. Blower motor of
variable speed ECM type shall be permanently lubricated
with sealed ball bearings, of _______hp, and supplies
delivers requested airflow CFM as defined by signals
received from EZ-SELECT airflow control when 24V
motor inputs are provided. Blower motor shall be direct
drive and soft mounted to the blower scroll to reduce
variation transmission.
Filters
Furnace may have reusable-type filters. Filter shall be
_______ in. (mm) (x) _______in. (mm) An accessory high
efficiency Media Filter is available as an option.
_______________ Media Filter.
Casing
Casing shall be of .030 in. (.76 mm) thickness
minimum, pre-painted galvanized steel.
Two Speed Inducer Motor
Two Speed Inducer motor shall be soft mounted to
reduce vibration transmission.
Flame Rollout Switch
Flame Rollout Switch shall be factory installed near
burner area to further reduce the possibility of a stuck gas
valve or failed inducer motor.
Heat Exchangers
Heat exchangers shall be a 4-Pass 20 gage corrosion
resistant aluminized steel of fold--and--crimp sectional
design when applied operating under negative pressure.
Controls
Control shall include a micro-processor based
integrated electronic control board with at least 11 service
troubleshooting codes displayed via diagnostic flashing
LED light on the control, a self-test feature that checks all
major functions of the furnace within one minute, and a
replaceable automotive-type circuit protection fuse.
Multiple operational settings available with the
EZ-SELECT fan control, including, separate blower
speeds for low heat, high heat, low cooling, high cooling
and continuous fan. Continuous fan speed may be adjusted
from the thermostat. Cooling airflow will be selectable
between 350 or 400 CFM per ton of air conditioning.
Features will also include temporary reduced airflow in the
cooling mode for improved dehumidification when an
InfinitytControl or Thermidistattis selected as the
thermostat.
OPERATING CHARACTERISTICS
Heating Capacity shall be ________ Btuh input;
________ Btuh output capacity.
Fuel Gas Efficiency shall be 80% AFUE.
Air delivery shall be ___________ cfm minimum at
0.50 in. wc external static pressure.
Dimensions shall be: depth __________ in. (mm);
width _________ in; height_________in. (mm) (casing
only). Height shall be_________in. (mm) with A/C coil
and _____________in. (mm) overall with plenum.
ELECTRICAL REQUIREMENTS
Electrical supply shall be 115 volts, 60 Hz,
single--phase (nominal). Minimum wire size shall
be_________AWG; maximum fuse size or circuit breaker
shall be __________Amps.
SPECIAL FEATURES
Refer to section of the product data sheet identifying
accessories and descriptions for specific features and
available enhancements.
Copyright 2009 Carrier Corp. D7310 W. Morris St. DIndianapolis, IN 46231 Printed in U.S.A. Edition Date: 02/09
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Catalog No: 58CV---5PD
Replaces: 58CV--- 4PD
58CVA/CVX