Cenvalsa PRA Series User manual

PRA-User manual
PRA-User manual
CONSOLA 15 / 17 / 19 / 19W
Single Rail Console with optional Modular
KVM Switch User Manual
Rev 4.0

PRA-User manual
PRA-User manual
I
Packing List
The complete PRA 15 / 17 / 19”single rail console with modular KVM switch
package consist of:
One 1U 19” rack mount console
Two rails with front and rear bracket
Two extended brackets
Two Short brackets
Two bracket attachments
One 1.8 m KVM cable (HDDB-15 / VGA + PS/2 x 2)
One USB cable
One DC power adapter
One power cord
One user manual CD
One quick installation guide
Two keys
Six flat screws (for rail mount to console body)
Six screws (for replace extended bracket)
The complete PRA 19” wide-screen single rail console with modular KVM
switch package consist of:
One 1U 19” rack mount console
PRA 15 / 17
bracket attachment
PRA 19 bracket
attachment

PRA-User manual
PRA-User manual
II
Two rails with front and rear bracket
One 1.8 m KVM cable (HDDB-15 / VGA + PS/2 x 2)
One USB cable
One DC power adapter
One power cord
One user manual CD
One quick installation guide
Two keys
Six flat screws (for rail mount to console body)
Check to make sure that the unit was not damaged in shipping. If you encounter a
problem, contact your dealer.
Please read this manual thoroughly,and follow the installation and operation
procedures carefully to prevent anydamageto the product,and/ or any of the
devices that connect to it.
Safety Instructions
1. Please read thesesafety instructions carefully.
2. Please keep this User’s Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Don’t use
liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for
cleaning.
4. For pluggable equipment, the socked-outlet shall be installed near the
equipment and shall be easily accessible.
5. Please keep this equipment from humidity.
6. Laythisequipment on a reliable surface when install. A drop or fall could cause
injury.
7. Do not leave this equipment in an environmentunconditioned, storage
temperature above 60 0C, it may damage the equipment.
8. The opening on the enclosure is for air convection hence the equipment from
overheating. DO NOT COVER THE OPENING.
9. Make sure the voltage of the power source connect the equipment to the power
outlet.
10.Please keep the power cord such a waythat people can not step on it.Do not
place anything over power cord. The power cord must rate for the voltage and
current marked on the product’s electrical ratings label. The voltage and current

PRA-User manual
PRA-User manual
III
rating of the cord shouldbe greater than the voltage and thecurrent rating
marked on the product.
11.Allcautions and warning on the equipment should be noted.
12.If the equipment is not in use for long time, disconnect the equipment from mains
to avoid being damaged by transient over-voltage.
13.Never pour any liquid into ventilation openings; this could cause fire or electrical
shock.
14.Never open theequipment. Forsafety reason,qualified service personnel
should only open the equipment.
15.If one of the following situations arises, get the equipment checked by service
personnel.
The Power Cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has notworked well or you cannot get it work according to
User’s Manual.
The equipment has dropped and damaged.
If the equipment has obvious signs or breakage.

PRA-User manual
PRA-User manual
IV
Index of Contents
Packing List..........................................................................................................I
Safety Instructions...............................................................................................II
Index of Contents.............................................................................................. IV
1. General Information......................................................................................1
1.1 Feature .................................................................................................1
1.2 Benefits.................................................................................................1
1.3 Advantage.............................................................................................2
1.4 Product Specification............................................................................3
1.4.1 PRA 15 Specification .............................................................3
1.4.2 PRA 17 Specification .............................................................5
1.4.3 PRA 19 Specification .............................................................7
1.4.4 PRA 19W Specification..........................................................9
2. Panel Controls and OSD Function..............................................................11
2.1 Auto Tune...........................................................................................11
2.2 Input Source .......................................................................................12
2.3 Brightness...........................................................................................12
2.4 Contrast..............................................................................................13
2.5 Color...................................................................................................13
2.6 Position...............................................................................................14
2.7 Language............................................................................................15
2.8 Recall..................................................................................................15
2.9 Exit......................................................................................................16
2.10 Power Indicator.................................................................................16
3.Installation...................................................................................................17
3.1 Install PRA 15 / 17 / 19 / 19W into Cabinet....................................17
3.1.1 Notes ........................................................................................17
3.1.2 Hardware Kits Contents............................................................17
3.1.3 Step A (Install Console) ............................................................18
3.1.4 Step B (Replace short bracket).................................................21
3.1.5 Step C (Replace extended bracket):.........................................22
3.1.6 Unload Steps ............................................................................23
3.2 Install Modular KVM Switch................................................................28
3.2.1 Hardware Kits Contents............................................................28
3.2.2 Install Modular KVM Switch Step..............................................28
3.3 Installing the Video Card and Video Driver.........................................30

PRA-User manual
PRA-User manual
V
3.3.1 Configuring the Display Settings...............................................30
3.3.2 Connecting the Console............................................................31
3.4 Turning on the Console.........................................................................31
3.5 Testing the Console..............................................................................32
4. KVM Switch ................................................................................................32

PRA-User manual
PRA-User manual
1
1. General Information
PRA series Single Rail consoles offer industrial level input solution to
optimize your space utilization by controlling your systems in just 1U. With the
unique modular design, you can easily integrate more than 17 models of
KVM switches with different functions and expand the connections up to 8
levels of the KVM switches.
1.1 Feature
Easy to install, single rail design.
PRA 15, PRA 17, PRA 19 for option
Support Sun native resolution (PRA 17, PRA 19)
Support 17 various keyboard languages (increasing)
Bright Active TFT display
OSD function for LCD display and KVM switch
Durable keyboard with touchpad
Panel protected by tempered glass
Integration with more than 17 models of KVM switches
Touch panel and Sun keys (optional)
With our fully modular IP & CAT5 modules, our customers can create 15
models of KVM Switch from5 basic models.
1.2 Benefits
1. Cost effective solution : With our unique design and all the options, you can
easily suffice the demand for your customer at reasonable cost.
2. Time to serve your customer : With the modular KVM, you can easily turn
single port console into 8 / 16 / 32 ports console to serve your customer well.
3. Keep low inventory : From the 4 models of consoles and 17 models of KVM
switches, IP Module and CAT5 Module, you can create total 72 models in
PRA Series. It is the best solution for inventory control.
4. Easy to maintain : Once the defective comes from the KVM switch, you can
just swap the KVM switch module without asking your customer to send the
whole console back to you.
5. Save freight cost : Since you have to keep only 4 models of consoles and
generate new models by yourself, you can ship all the goods by sea instead of

PRA-User manual
PRA-User manual
2
by air. In case, you run out of the KVM switch stock, it is much cheaper to
ship the KVM switch modules by air.
1.3 Advantage
Easy to install:
With the unique separate rail design. One man can install the PRA console
easily. In case you need to maintain the console, you can easily uninstall
without effecting the server above or below.
Modular KVM switches:
The user can use PRA series console as single port console or through some
simple action and few screws to be 8 / 16 even 32 ports KVM consoles.
Various keyboard language support:
to fit the demand of each individual countries.
Most LCD size available in the market:
We offer 15 / 17 / 19" LCD for PRA series console.

PRA-User manual
PRA-User manual
3
1.4 Product Specification
1.4.1PRA 15 Specification
Model name
PRA 15
Number of ports
1
Dimension
468.9 x 482.0 x 44.0 mm / 18.5 x 19.0 x 1.7 inches
Package Dimension
606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches
Net Weight
12 Kg / 26.46 lbs
Gross Weight
19.5 Kg / 43.0 lbs
Display Size
15 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1024 x 768 (XGA)
Pixel Pitch
Supports 0.297 mm x 0.297 mm
Viewing Angle (CR>10)
Right-Left View 130°(Typ)
Up-Down View 100°(Typ)
Contrast Ratio
550 : 1
Brightness
White 250 cd/ m²
Back Light
Dual Lamps for Back Light
Supported Colors
16M Colors (6-bit with FRC)
Response Time
Rising Time 2 ms, Decay Time 6 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Multi Platform
Support PS/2 and USB
System Cables
VGA + PS/2 x 2 or VGA + USB x 1 cable
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
10.12W for Panel
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
USA, UK, German, French, Spanish, Italian, Portuguese,
Dutch, Swiss, Belgium, Swedish, Norwegian, Danish, Japan,
Taiwan, Russian, Hebrew, Arabic
Certification
CE / FCC, UL / CUL / C-Tick, GOST
Table 1-1. PRA 15 Specification

PRA-User manual
PRA-User manual
4
Figure 1-1. PRA 15 Dimension

PRA-User manual
PRA-User manual
5
1.4.2PRA 17 Specification
Model name
PRA 17
Number of ports
1
Dimension
468.9 x 482.0 x 44.0 mm / 18.5 x 19.0 x 1.7 inches
Package Dimension
606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches
Net Weight
13 Kg / 28.7 lbs
Gross Weight
20.5 Kg / 45.2 lbs
Display Size
17 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch
Supports 0.264 mm x 0.264 mm
Viewing Angle (CR>10)
Right-Left View 170°(Typ)
Up-Down View 160°(Typ)
Contrast Ratio
1000 : 1
Brightness
White 250 cd/ m²
Back Light
DualLamps for Back Light
Supported Colors
16.7M Colors (6-bit with FRC)
Response Time
Rising Time 3.8 ms, Decay Time 1.2 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Multi Platform
Support PS/2 and USB
System Cables
VGA + PS/2 x 2 or VGA + USB x 1 cable
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
9.91W for Panel
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
USA, UK, German, French, Spanish, Italian, Portuguese,
Dutch, Swiss, Belgium, Swedish, Norwegian, Danish, Japan,
Taiwan, Russian, Hebrew, Arabic
Certification
CE / FCC, UL / CUL / C-Tick, GOST
Table 1-2. PRA 17 Specification

PRA-User manual
PRA-User manual
6
Figure 1-2. PRA 17 Dimension

PRA-User manual
PRA-User manual
7
1.4.3PRA 19 Specification
Model name
PRA 19
Number of ports
1
Dimension
518.9 x 482.0 x 44.0 mm / 20.4 x 19.0 x 1.7 inches
Package Dimension
606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches
Net Weight
14 Kg / 30.9 lbs
Gross Weight
21.5 Kg / 47.4 lbs
Display Size
19 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch
Supports 0.098 mm x 0.294 mm
Viewing Angle (CR>10)
Right-Left view 170°(Typ)
Up-Down View 160°(Typ)
Contrast Ratio
1000 : 1
Brightness
White 250 cd/ m²
Back Light
Dual Lamps for Back Light
Supported Colors
16.7M Colors (6-bit with FRC)
Response Time
Rising Time 3.6 ms, Decay Time 1.4 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Multi Platform
Support PS/2 and USB
System Cables
VGA + PS/2 x 2 or VGA + USB x 1 cable
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
11.03W for Panel
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
USA, UK, German, French, Spanish, Italian, Portuguese,
Dutch, Swiss, Belgium, Swedish, Norwegian, Danish, Japan,
Taiwan, Russian, Hebrew, Arabic
Certification
CE / FCC, UL / CUL / C-Tick, GOST
Table 1-3. PRA 19 Specification

PRA-User manual
PRA-User manual
8
Figure 1-3. PRA 19 Dimension

PRA-User manual
PRA-User manual
9
1.4.4 PRA 19W Specification
Model name
PRA 19W
Number of ports
1
Dimension
526.0 x 482.0 x 43.8 mm / 20.7 x 19.0 x 1.7 inches
Package Dimension
827 x 564 x 206 mm / 32.6 x 22.2 x 8.1 inches
Net Weight
14 Kg / 30.9 lbs
Gross Weight
21.5 Kg / 47.4 lbs
Display Size
19 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1440 x 900 (WXGA)
Pixel Pitch
Supports 0.283 mm x 0.283 mm
Viewing Angle (CR>10)
Right-Left view 90°(Typ)
Up-Down View 65°(Typ)
Contrast Ratio
700 : 1
Brightness
White 200 cd/ m²
Back Light
Dual Lamps for Back Light
Supported Colors
16.7M Colors (6-bit with FRC)
Response Time
Rising Time 2 ms, Decay Time 10 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Multi Platform
Support PS/2 and USB
System Cables
VGA + PS/2 x 2 or VGA + USB x 1 cable
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
15.5W
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
USA, UK, German, French, Spanish, Italian, Portuguese,
Dutch, Swiss, Belgium, Swedish, Norwegian, Danish, Japan,
Taiwan, Russian, Hebrew, Arabic
Table 1-4. PRA 19W Specification

PRA-User manual
PRA-User manual
10
Figure 1-4. PRA 19W Dimension

PRA-User manual
PRA-User manual
11
2.Panel Controls and OSD Function
Table 2-1. Panel Controls
Figure 2-1. PRA 15 / 17 OSD Control Bar
Figure 2-2. PRA 19 / 19”Wide-screen OSD Control Bar
2.1 Auto Tune
Press the “auto tune” button. The panel will adjust the display size
Controls
Description
Soft power on/off button. Adjacent LED is lit when
on.
Auto
Auto-synchronize and scale down display to any
valid factory preset timings.
Press to scroll the function you want to adjust.
Press to scroll the function you want to adjust.
Menu
To access the main menu. This button also acts as
the “Enter” button.

PRA-User manual
PRA-User manual
12
automatically and also tune the panel to its best condition.
2.2 Input Source
1. Press the “menu” button.
2. Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the“menu”button to enter,and you will see:
VGA / DVI
4. Use the “Down” and “Up” button to select the input source of signal.
5. Press the “menu” button to enter
2.3 Brightness
1. Press the “menu” button.
2. Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the“menu”button to enter.
4. Use the“Down”and“Up”button to adjust the brightness of the display.
5. Press the “menu” button to enter.

PRA-User manual
PRA-User manual
13
2.4 Contrast
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
1.Press the “menu” button to enter.
2.Use the “Down” and “Up” button to adjust the contrast of the display.
3.Press the “menu” button to enter.
2.5 Color
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit

PRA-User manual
PRA-User manual
14
3.Press the “menu” button to enter. And you will see:
Icon
Description
9300°K
To set CIE coordinates at 9300°K color
7500°K
To set CIE coordinates at 7500°K color
6500°K
To set CIE coordinates at 6500°K color
User
To set user defined CIE
Auto color
To auto adjust color
Return
To exit and return to the previous page
Table 2-2. Icon Description
4.Use the “Down” and “Up” button to adjust the color of the display.
5.Press “menu” to enter.
2.6 Position
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3.Press the “menu” button to enter. And you will see:
Icon
Description
Image Pos
To adjust the position of the image.
OSD Pos
To adjust the position of the OSD.
Return
To exit and return to the previous page
Table 2-3. Icon Description
4.Use the “Down” and “Up” button to scroll.