1.2 Basic Operation
1.2.1 Switch ON
When the device is in the OFF mode, press and hold "Power" key
for 3 seconds to enter the And roid startup progress bar, then you
can enter to the system desktop.
'l .2.2 Unlock the screen
Please press and drag theu icon to the!, then the LCD will unl-
ocked automatically.
1.2.3 Lock the screen
When the device is in the ON mode, press the "POWER" key short-
ly. the system will lock the screen and enter the save power mode.
Then the screen is OFF but the system still in operation.
1.2.4 Switch OFF
When the device is in the ON mode, press and hold the "POWER"
key for 3 seconds, the screen will display the power off interface,
choose the power off item to confirm, the system will shut automat-
ically.
1.2.5 Restart the device
Press "RESET" key and the device will reset.
1.2.6 Battery charging
lnsert the micro port of the battery adaptor into 220V AC slot on the
device, and connect the other side with the power socket. Then,
you can charge the device.
[Note] This device is not recommended to use USB interface to ch-
arge, please must use the special power adapter for charging. Yo-
u should charge the batteryforat leastS-12 hours to make sure
the battery is fully charged at the first time. On charge the power
indicating lamp of the device is in high light blue color, the desktop
icon of the battery E keep rolling which shows it is connect to the
charger. This device is not recommended to charge with USB port,
please use the adapter.
1.2.7 Switch input methods
The device support handwriting, number, letter, pinyin etc.
switching follow:
Click any text in pul area of the working program interface, it will
popping input keyboard interface, as shown below:
Press E, then it will popping "tnput Method" switch interface, as
shown below:
edrod keyha.d len,nqs
Select the input method you want here.
[Noted] After newly install input method, you should ,,settings>La-
nguage & input>KEYBOARD & INPUT IVETHODS", then you can
use.
1.2.8 Use Micro SD card
. lnsert Micro SD card
lnsert the Micro SD card into the slot in direction of the device,s
bottom shell until you hear a sound of click.
. Browse files in the memory card
ln this MID device you can view and use the needed files in
catalogue of "MENU">"File manager"> "SD Card,,.
. Remove Micro SD card
Close all open files from the Micro SD, then enter into,,MENU,,>
"SETTINGS">"TF card and & device storage", click,,Unmount SD
card" ,System will prompt that Micro SD card was removed safely.