Chad Valley Straight Slide Owner's manual

Straight Slide
Assembly & User Instructions -Please keep for future reference
Important - Please read these instructions fully before assembly or use
These instructions contain important information which will help you get the best from your
product and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline: 01291 650581
Warning
Age: 3+ years
910/8453,910/8446

3
Parts
Assembly Instructions
Steps 1-3
Steps 4-6
Steps 7-9
Steps 10-12
Steps 13-15
Contents
4
5
6
7
8
9

4
ASlide x1
1-02-984
vpt 000436
vpt 000437
vpt 000438
vpt 000439
2-04-984
vpt 000426
vpt 000425
BHandle Bars x2
CStiles x2
DConnector Tubes x2
GBase Connectors x2
KEnd Caps x2
LPlastic Plug x2
MScrew x10
HNuts x16
IPlastic Washers x2
NScrew x8
JCap Nut x2
EBase Tube x1
FSteps x3
if you have damaged or missing parts,
call the Customer Helpline: 01291 650581
Includes:
Allen Key
10mm Fix Key
45 mm
40 mm
Parts
•To avoid scratches to metal pipes, please assemble on a soft surface.
3-11-982 vpt 000498 vpt 000423
vpt 000424
3-01-984vpt 000421
2-11-982 1-11-982

5
Assembly Instructions
Step 1
Step 2
Insert Handle Bars
Insert handle bar (B) into
the grooves on slide (A).
Assemble Handle Bar
Fix rear hole with 40mm
screw (N) and nut (H).
Assemble Handle Bar
Fix front hole with
40mmm screw (N)
and nut (H).
B
B
B
A
A
A
Step 3
•To avoid scratches to metal pipes, please assemble on a soft surface.

6
Assembly Instructions
Assemble Plug
Insert plug (L) and repeat
all operations on the other
side.
Assemble Stiles
Insert stiles (C).
Assemble First Step
Insert upper step (F).
B
L
C
F
Step 4
Step 5
Step 6

7
Assembly Instructions
Fix Step
Fix upper step (F) with
45mm screw (M) and nut
(H) on both sides.
Assemble Steps
Insert midde and lower
steps (F).
Connect Handle Bars
Fix the steps (F) on
both ends with 45mm
screw (M) and nuts (H).
Step 9
Step 8
Step 7
F
F
F

8
Assembly Instructions
Step 1
Step 2
Assemble legs
Insert all 4 legs bla
Important: gegeg
egegegege gegef
Assemble legs
Insert all 4 legs bla
Important: gegeg
egegegege gegef
Assemble Connector
Tube
Place connector tube (D)
in position.
Fix Connector Tube
Fix connector tube (D) on
stile (C) with 40mm screw
(N) and cap nut (J).
Fix Connector Tube
Fix connector tube (D)
on slide (C) with plastic
washer (I), screw (N) and
nut (H) and repeat step
10-12 on the other side.
Step 11
Step 12
Step 10
D
D
C
C

9
Assembly Instructions
Step 1
Assemble Base
Fit base connectors (G)
on base tube (E) and t
assembly on stiles (C).
Fix Base
Fix assembly with 45mm
screws (M) and nuts (H).
Assemble End Caps
Assemble end cups (K)
in both sides of base
tube (E).
Step 15
Step 14
Step 13
E
E
E
G
C
C
K

If you need help or have damaged or missing parts, call the Customer Helpline: 01291 650581
Produced for Chad Valley Toys. Country of origin: Israel.
Argos LTD Address: 488 - 499 Avebury Boulevard, Central Milton Keynes, MK9 2NW.
www.argos.co.uk/chadvalley
15542
• Remove all packaging materials such as: bags, bands & cartons.
• Side bars are not for standing or climbing on.
• WARNING! domestic use.
• WARNING! For indoor/outdoor use
• WARNING! Max load 50 kg.
• WARNING! Recommended age of use: 3 years and above.
• Place the toy on a level surface at least 2 m from any structure or obstruction, such as fence,
garage, house, overhanging branches, laundry lines or electrical wires.
• The toy shall not be installed over concrete, asphalt or any other hard surface.
• Do not face slide-shute directly towards the sun when in use.
• Check toy before every use for any damage or missing parts.
• Check connections regularly for continued security and for any evidence of deterioration or hazards.
• Replace, if required, with suitable & new parts.
• Failure to do so may result in an injury or fall.
• Adult assembly required.
• Adult supervision is required at all times
• Please keep this instruction sheet for future reference.
1.33m
2.19m
1.30m