Char-Broil C-22G1 463622514 User manual

Char-Broil Classic C-22G1
463622514
10/23/13 • G309-001-110801
during assembly, please call 1-800-241-7548.
l’assemblage, S’il vous plaît appelez 1-800-241-7548
durante el Ensamblado, llámenos Al 1-800-241-7548

2
DANGER
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION: Indicates a potentially hazardous situation
or unsafe practice which, if not avoided, may result in
minor or moderate injury.
TABLE OF CONTENTS
Safety Symbols
The symbols and boxes shown below explain what each
heading means. Read and follow all of the messages found
throughout the manual.
THIS GRILL IS FOR OUTDOOR
USE ONLY.
Read and follow all safety statements, assembly
instructions, and use and care directions before
attempting to assemble and cook.
INSTALLER/ASSEMBLER:
Leave this manual with consumer.
CONSUMER:
Keep this manual for future reference.
Failure to follow all manufacturer’s instructions could
result in serious personal injury and/or property
damage.
Some parts may contain sharp edges. Wear
protective gloves if necessary.
For residential use only. Do not use for
commercial cooking.
WARNING
DANGER
If you smell gas:
1. Shut off gas to the appliance
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
WARNING
1. Do not store or use gasoline or other
flammable liquids or vapors in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
WARNING
CAUTION
CAUTION
CAUTION
WARNING
CALIFORNIA PROPOSITION 65
1. Combustible by-products produced when using
this product contains chemicals known to the State
of California to cause cancer, birth defects, or other
reproductive harm.
2. This product contains chemicals, including lead
and lead compounds, known to the State of
California to cause cancer, birth defects or other
reproductive harm.
Wash your hands after handling this product.
WARNING
Do not attempt to repair or alter the
hose/valve/regulator for any “assumed” defect.
Any modification to this assembly will void your
warranty and create the risk of a gas leak and fire.
Use only authorized replacement parts supplied by
manufacturer.
Installation Safety Precautions
•Use grill, as purchased, only with LP (propane) gas
and the regulator/valve assembly supplied. If your grill
is Dual Fuel ready, a conversion kit must be
purchased for use with natural gas.
•Grill installation must conform with local codes, or in
their absence of local codes, with either the National
Fuel Gas Code, ANSI Z223.1/ NFPA 54, Natural Gas
and Propane Installation Code, CSA B149.1, or
Propane Storage and Handling Code, B149.2.
•All electrical accessories (such as rotisserie) must be
electrically grounded in accordance with local codes, or
National Electrical Code, ANSI / NFPA 70 or Canadian
Electrical Code, CSA C22.1. Keep any electrical cords
and/or fuel supply hoses away from any hot surfaces.
•This grill is safety certified for use in the United States
and/or Canada only. Do not modify for use in any other
location. Modification will result in a safety hazard.
CAUTION
Grease Fires
• Putting out grease fires by closing the lid is
not possible. Grills are well ventilated for
safety reasons.
• Do not use water on a grease fire. Personal injury
may result. If a grease fire develops, turn knobs
and LP tank off.
• If grill has not been regularly cleaned, a grease fire
can occur that may damage the product. Pay close
attention while preheating or burning off food
residue to insure that a grease fire does not
develop. Follow instructions on General Grill
Cleaning and Cleaning The Burner Assembly to
prevent grease fires.
• The best way to prevent grease fires is
regular cleaning of the grill.
CAUTION
Using pots larger than 6 quarts in capacity could
exceed weight limit of the side burner shelf or side
shelf, resulting in failure of grill cart components.
DANGER
•NEVER store a spare LP cylinder under or near
the appliance or in an enclosed area.
•Never fill a cylinder beyond 80% full.
If you see, smell or hear gas escaping,
immediately get away from the LP
cylinder/appliance and call your fire department.
•
An over filled or improperly stored cylinder is a
hazard due to possible gas release from the safety
relief valve. This could cause an intense fire with
risk of property damage, serious injury or death.
•
For Your Safety................................2
Grilling Guide................................3-4
Use and Care ...............................5-7
Limited Warranty ..............................8
Parts List.. .................................23
Parts Diagram................................26
Assembly.................................27-32
Troubleshooting............................33-34
Registration Card.............................39

3
Rotisserie Cooking
Rotisserie cooking is best for 'round' meat, such as large
roasts, whole poultry, and pork. It generally requires an
accessory motor and spit rod that allows the meat to be
turned at a constant speed. Rotisserie cooking is best
done in front of a special rotisserie burner, or utilizing an
indirect cooking burner arrangement. A pan can be
placed underneath the meat to catch grease and food
drippings, and helps minimize clean-up.
Food Safety
Food safety is a very important part of enjoying the
outdoor cooking experience. To keep food safe from
harmful bacteria, follow these four basic steps:
Clean: Wash hands, utensils, and surfaces with hot
soapy water before and after handling raw meat.
Separate: Separate raw meats from ready-to-eat foods
to avoid cross contamination. Use a clean platter and
utensils when removing cooked foods.
Cook: Cook meat and poultry thoroughly to kill bacteria.
Use a thermometer to ensure proper internal food
temperatures.
Chill: Refrigerate prepared foods and leftovers promptly.
First Time Use
Read your Assembly Manual and ensure the grill is put
together properly. Remove all Point-of-Purchase
advertising material from all grill surfaces before first use.
We recommend operating your grill on its highest setting for
15-20 minutes prior to your first use. This aids in removing
the oils used during manufacturing.
Lava Rock / Briquettes
This gas grill has been designed, engineered, and tested to
be used with heat tents to provide more even heating,
improve the cleaning process, and reduce flare-ups. The
addition of after market lava rocks, charcoal, or briquettes
of any type will cause poor combustion and increase the
likelihood of a grease fire, and is not recommended. Using
briquettes, lava rock, or charcoal in this grill will void your
warranty. For extra smoke flavor, we recommend using a
smoker box with wood chips.
Temperature - Convective Grills ONLY.
The temperature gauge in the hood of your new grill
measures air temperature. The air temperature inside your
grill will never be as hot as the temperature at the cooking
surface.
Note: Since 1995, all regulators (the part that attaches to
the gas tank to regulate the flow of gas) have included a
safety feature that restricts gas flow in the event of a gas
leak. You can inadvertently activate this safety feature
without having a gas leak. This typically occurs when you
turn on the gas using the grill control knob before you turn
on the LP tank valve. If the gas regulator safety feature
activates, the grill will only reach temperatures between
250°F and 300°F even with all burners on the high setting.
If your grill is not getting hotter than 250°F to 300°F
these steps should be taken first to reset the gas
regulator safety device:
1. Open the grill lid.
2. Turn off all knobs on the control panel in front.
3. Turn off the tank knob.
4. Disconnect the regulator from the LP tank.
5. Wait 30 seconds.
6. Reconnect the regulator to the LP tank.
7. Slowly open the LP tank knob all the way. Do not put
excessive force on the valve at the full open position to
avoid damaging the valve.
8. Turn on the appropriate control knob and light the grill per
the instructions.
An illustration of this process is included in this Product
Guide. See Troubleshooting section for additional
information.
GRILLING GUIDE – Getting Started
Regulator Coupling Nut
Pre-Heating Your Grill
Just like your home oven, your grill should be pre-heated
to provide optimum performance. Pre-heat the grill on high
for 10-15 minutes – longer if weather conditions require.
Please refer to the lighting instructions inside the Product
Guide if you have questions about how to light your grill. A
match-light chain and hole is provided for your
convenience.
Outdoor grilling is really quite simple. You'll succeed with
burgers, dogs, or steaks usually on your very first try.
With experience, you will learn how to work with your grill,
creating more imaginative meals all the time. This
knowledge makes up the art of grilling. Before you start
grilling, organize your food according to cooking
technique and required cooking time, and optimize the
use of your grilling area.
Direct Cooking
Direct cooking involves grilling your meat directly over
high heat. It is perfect for searing steaks, chops, and
other smaller pieces of meat and vegetables that quickly
make their way to the table.
Indirect Cooking
Indirect cooking utilizes select burners to circulate heat
throughout the grill, without direct contact between the
meat and the flame. The meat is placed over the burner
that is 'off'. This method is generally used to slow cook
large cuts of meat and poultry. A pan can be placed
underneath the meat to catch grease and food drippings,
and helps minimize clean-up.

4
Skewers
Metal skewers should be flat, with long handles. Round
skewers allow food to roll when turned, so it may not cook
as evenly. Use metal skewers when cooking meat
kabobs. Wooden skewers should be soaked in water for
an hour before use, and are best used for quick cooking
foods such as vegetables and fruits.
Utensils
Use tongs or a spatula to handle the food instead of a
fork, and don't turn the food too
often. Piercing the food
with a fork will release
juices that you want in
the meat, and may
cause flare-ups.
GRILLING GUIDE – Tips & Tricks
Wood Chips
For extra smoke flavor when grilling, try adding wood
chips. Soak the chips in water for approximately 30
minutes before adding to a smoke box or pan. Place
smoke box or pan on top of the cooking grate above the
flame. Turn grill on high until the wood starts to smoke.
Reduce heat to desired temperature for cooking, and
place food on cooking grate as desired. Close lid to
retain more smoke. Hardwood varieties that work
particularly well with grilled foods include Alder, Apple,
Cherry, Hickory, Mesquite, and Pecan.
USDA Recommended Safe Minimum
Internal Temperatures
145° F
Fish
(with a 3 minute rest time)
145° F
Beef, Veal, Lamb, and Pork - Ground 160° F
Egg Dishes 160° F
Turkey, Chicken & Duck Whole,
Pieces & Ground 165° F
Beef, Veal, Lamb, Steak, Roasts, & Whole Pork
Cooking on your new grill is a hands-on experience, and it is
recommended to remain outside with your grill while
cooking. Grilling can be affected by many external
conditions. In cold weather, you will need more heat to
reach an ideal cooking temperature, and grilling may take
longer. The meat's internal temperature and thickness can
also affect cooking times. Cold and thicker meats will take
longer to cook.
Internal Meat Temperatures
Meat cooked on a grill often browns very fast on the outside.
Therefore, use a meat thermometer to ensure it has
reached safe internal temperatures.
Please refer to the USDA for complete, up-to-date
information. Our internal temperature chart is based on
USDA standards for meat doneness. Check it out at
www.isitdoneyet.gov
Sauces
Sauces containing sugars and fats can cause flare-ups, and
your food may burn. In general, apply these sauces during
the final 10 minutes of cooking. Keep in mind, use of
excessive sauces or glazes will also require extra cleaning
afterwards.
Marinades and Rubs
To enhance the flavor of grilled foods, a liquid marinade or
dry rub can be used prior to cooking. Meat can be either
soaked or injected with liquid marinade up to 24 hours prior
to grilling. Dry rubs can be applied directly to the meat
immediately before grilling.
The Char-Broil® grill is equipped with Gear Trax™,
which allow for the easy mounting of our unique line of
Gear Trax accessories. Please visit charbroil.com for a
complete list of Gear Trax accessories. *Available on
most models.
VISIT CHARBROIL.COM FOR
ALL YOUR GRILLING NEEDS!
Cooking surfaces: Ensure no loose bristles remain on
cooking surfaces prior to grilling. It is not recommended
to clean cooking surfaces while grill is hot.
Storing Your Grill
• Clean cooking grates.
• Store grill in dry location.
• When LP cylinder is connected to grill, store outdoors in
a well ventilated space and out of reach of children.
• Cover grill if stored outdoors. Choose from a variety of
grill covers offered by manufacturer.
• Store grill indoors ONLY if LP cylinder is turned off,
disconnected, and removed from grill. Never store LP
cylinder indoors.
• When removing grill from storage, follow the 'Cleaning
the Burner Assembly' instructions in the Use and Care
section of the Product Guide.
Critters
Spiders like to make their homes in the venturi tubes of
grills. These must be inspected and cleaned regularly to
ensure there are no blockages. Refer to the Use and
Care portion of this Product Guide for complete
information.
Why Clean?
We've all heard the saying 'An ounce of prevention is worth
a pound of cure'. This is great advice when it comes to
keeping your grill clean.
Routine Care
Periodic cleaning of this grill is necessary, as grill fires can
occur when grease and food debris collect in the bottom of
the grill. After each use, remove any remaining food
particles from the cooking grate and inside of the grill using
a grill brush. Do this after the grill has cooled down. This
grill is not designed to be 'burned off' by closing the lid and
turning the burners on High for an extended time. The
excessive heat generated can cause leftover grease to
catch fire, and can cause permanent damage to your grill.
General Cleaning
Plastic parts: Wash with warm soapy water and wipe dry.
Do not use abrasive cleaners, degreasers or a
concentrated grill cleaner on plastic parts. Damage to and
failure of parts can result.
Porcelain surfaces: Because of glass-like composition,
most residue can be wiped away with baking soda/water
solution or glass cleaner. Use non-abrasive scouring
powder for stubborn stains.
GRILLING GUIDE – Cleaning
Your Grill
Painted surfaces: Wash with mild detergent or non-abrasive
cleaner and warm water. Wipe dry with a soft non-abrasive
cloth.
Stainless steel surfaces: Stainless steel can rust under
certain conditions. This can be caused by environmental
conditions such as chlorine or salt water, or improper
cleaning tools such as wire or steel
wool. It can also discolor due to heat,
chemicals, or grease build-up. To
maintain your grill's high quality
appearance, wash with mild detergent
and warm water, or use a stainless
steel grill cleaner. Baked-on grease
deposits may require the use of an
abrasive plastic cleaning pad. Use only
in direction of brushed finish to avoid
damage. Do not use abrasive pad on
areas with graphics.

5
LP Cylinder Removal, Transport and Storage
•Turn OFF all control knobs and LP cylinder valve. Turn
coupling nut counterclockwise by hand only - do not use
tools to disconnect. Loosen cylinder screw beneath
bottom shelf or disconnect other retention means, then lift
LP cylinder up and and out of cart. Install safety cap onto
LP cylinder valve. Always use cap and strap supplied
with valve. Failure to use safety cap as directed may
result in serious personal injury and/or property
damage.
•A disconnected LP cylinder in storage or being
transported must have a safety cap installed (as
shown). Do not store an LP cylinder in enclosed
spaces such as a carport, garage, porch, covered patio
or other building. Never leave an LP cylinder inside a
vehicle which may become overheated by the sun.
•Do not store an LP cylinder in an area where children play.
OPD Hand Wheel
LP (Liquefied Petroleum Gas)
•LP gas is nontoxic, odorless and colorless when
produced. For Your Safety, LP gas has been given an
odor (similar to rotten cabbage) so that it can be smelled.
•LP gas is highly flammable and may ignite unexpectedly
when mixed with air.
LP Cylinder Filling
•Use only licensed and experienced dealers.
•LP dealer must purge new cylinder before filling.
•Dealer should NEVER fill LP cylinder more than 80% of
LP cylinder volume. Volume of propane in cylinder will
vary by temperature.
•A frosty regulator indicates gas overfill. Immediately close
LP cylinder valve and call local LP gas dealer for
assistance.
•Do not release liquid propane (LP) gas into the
atmosphere. This is a hazardous practice.
•To remove gas from LP cylinder, contact an LP dealer or
call a local fire department for assistance. Check the
telephone directory under “Gas Companies” for nearest
certified LP dealers.
LP Cylinder Valve
Retainer Strap
Safety Cap
LP Cylinder
•The LP cylinder used with your grill must meet
the following requirements:
•Use LP cylinders only with these required
measurements: 12" (30.5cm) (diameter) x 18" (45.7
cm) (tall) with 20 lb. (9 kg.) capacity maximum.
•LP cylinders must be constructed and marked in
accordance with specifications for LP cylinders of the
U.S. Department of Transportation (DOT) or for Canada,
CAN/CSA-B339, cylinders, spheres and tubes for
transportation of dangerous goods, Transport Canada
(TC). See LP cylinder collar for marking.
•LP cylinder valve must have:
•Type 1 outlet compatible with
regulator or grill.
•Safety relief valve.
•UL listed Overfill Protection Device (OPD). This OPD
safety feature is identified by a unique triangular hand
wheel. Use only LP cylinders equipped with this
type of valve.
•LP cylinder must be arranged for vapor withdrawal
and include collar to protect LP cylinder valve.
Always keep LP cylinders in upright position
during use, transit or storage.
LP cylinder in upright position for
vapor withdrawal
USE AND CARE
LP Cylinder Exchange
•Many retailers that sell grills offer you the option of
replacing your empty LP cylinder through an exchange
service. Use only those reputable exchange companies
that inspect, precision fill, test and certify their cylinders.
Exchange your cylinder only for an OPD safety
feature-equipped cylinder as described in the "LP
Cylinder" section of this manual.
•Always keep new and exchanged LP cylinders in upright
position during use, transit or storage.
•Leak test new and exchanged LP cylinders BEFORE
connecting to grill.
•Place safety cap on cylinder valve outlet whenever the
cylinder is not in use. Only install the type of safety cap
on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may result in
leakage of propane.
LP Cylinder Leak Test
For your safety
•Leak test must be repeated each time LP cylinder is
exchanged or refilled.
•Do not smoke during leak test.
•Do not use an open flame to check for gas leaks.
•Grill must be leak tested outdoors in a well-ventilated
area, away from ignition sources such as gas fired or
electrical appliances. During leak test, keep grill away
from open flames or sparks.
•Use a clean paintbrush and a 50/50 mild soap and water
solution. Brush soapy solution onto areas indicated by
arrows in figure below.
▲ Do not use household cleaning agents. Damage to
gas train components can result.
WARNING
If “growing” bubbles appear do not use or move the LP
cylinder. Contact an LP gas supplier or your fire
department!
Connecting Regulator to the LP Cylinder
1.LP cylinder must be properly secured onto grill. (Refer
to assembly section.)
2.Turn all control knobs to the OFF position.
3.Turn LP cylinder OFF by turning hand-wheel clockwise
to a full stop.
4.Remove the safety cap from LP cylinder valve. Always
use cap and strap supplied with valve.
OPD Hand Wheel
Safety Relief Valve
Strap and Cap
Type 1 outlet with
thread on outside
c k w
o
l
i
s
C
e
f
f
O
Do not use a POL transport
plug (plastic part with
external threads)! It will
defeat the safety feature of
the valve.
5.Hold regulator and insert nipple into
LP cylinder valve. Hand-tighten the
coupling nut, holding regulator in a
straight line with LP cylinder valve
so as not to cross-thread the
connection.
Nipple has to be centered
into the LP cylinder valve.
Straight
Hold coupling nut
and regulator as
shown for proper
connection to LP
cylinder valve.
6.Turn the coupling nut clockwise and tighten to a full stop.
The regulator will seal on the back-check feature in the
LP cylinder valve, resulting in some resistance. An
additional one-half to three-quarters turn is required
to complete the connection. Tighten by hand only –
do not use tools.
NOTE:
If you cannot complete the connection, disconnect
regulator and repeat steps 5 and 6. If you are still unable
to complete the connection, do not use this regulator!
DANGER
• Do not insert any tool or foreign object into the valve
outlet or safety relief valve. You may damage the
valve and cause a leak. Leaking propane may result
in explosion, fire, severe personal injury, or death.
Coupling nut