
MAINTENANCE
How to use, maintain, and clean the shaver head:
1. Make sure unit is in the “OFF” position before cleaning your shaver.
2. Pull out the shaver cutter from the unit shaver head.
3. Rinse the shaver cutter and foil frame under running water or in a sink.
(You can use the cleaning brush which is included.) Do not use hot water.
Use only warm or cold water.
4. After wet cleaning, allow the foil frame and cutters to air-dry before
closing foil frame and shaver head. Replace shaver head back onto the
shaver until it clicks into place. Wipethe surface of the main unit with a
dry towel. Do not dry the foil area. Let the shaving head air-dry. Once the
shaving head is dry, replace the plastic protection cap.
5. The cutter can also be cleaned with the cleaning brush provided.
6. If the body of the shaver becomes dirty, wipe off with a damp cloth
and mild detergent or soap. Never use thinners, other solvents, or any
harsh cleaners.
t5PDMFBOUIFSPUBUJOHEJTLTSFNPWFUIFVQQFSQBSUUIBUQSPUFDUTUIFN
simply by sliding up.
Caution: pull without pressing on the buttons on the sides of the appli-
ance so as not to remove the whole hair removal head.
t3VOUIFQSPWJEFEDMFBOJOHCSVTICFUXFFOUIFEJTLTBGUFSFBDIVTF
t 8F SFDPNNFOE ZPV SFHVMBSMZ EJT-
infect the head and accessories with
alcohol. Never immerse the appliance
or the removable heads in water.
t*GUIFCPEZPGUIFBQQMJBODFOFFETUP
be cleaned, use a cloth moistened with
soft detergent.
t3VOUIFMJUUMFCSVTICFUXFFOUIFEJTLT
after each use.
t8FSFDPNNFOEZPVSFHVMBSMZEJTJOGFDUUIFIFBETBOEBDDFTTPSJFTXJUI
alcohol. Never immerse the appliance in water.
t'PSNBYJNVNIZHJFOFUIFEFQJMBUJPOIFBEDBOCFSFNPWFEBOEFBTJMZ
rinsed under running water.
This Class [B] digital apparatus complies with Canadian ICES-003
If your hair is long (longer than 1 cm), we recommend cutting it with scis-
sors before using your hair remover, preferably set at speed I.
1. To remove hair from your underarms, move the appliance using an
upward motion, then a second time using a downward motion.
2. To remove hair from your bikini line, carefully stretch your skin and
move the appliance working from the outside in.
C - Moisturizing:
After hair removal, we recommend using a
moisturizing milk to soften your skin. Apply the milk then massage it in
using circular motions to help your skin absorb it.
Using the Shaver
The shaver head is designed to provide a clean, close shave to your legs,
arms, and underarms. Take care with the foil as it is very sensitive and
easily damaged. Always inspect it for damage before you use it. Never
use a foil that is damaged, as this can result in injury. Make sure your skin
is clean and dry before use. Do not use any lotions or oils before shaving.
IMPORTANT
t0OMZVTF$POBJS
®
epilator for hair removal and following the instruc-
tions in this manual.
t%POPUSFNPWFIBJSGSPNBSFBTXJUIPQFOXPVOETDVUTCVSOTXBSUT
moles, sunburn skin or varicose veins. Do not use if you are suffering
from a skin irritation, skin infections like psoriasis or eczema on the legs,
or any skin ailment or disease.
t%POPUVTFGPSSFNPWJOHIBJSGSPN
your face, head, chest, eyebrows,
eyelashes or genitals. Only use the
epilator to remove hair from your
legs, bikini line, arms and underarms.