cool blue BlueBuilt BBRWM3243 User manual

In the box
1
Bag of screws
2
screws and plugs for the wall,
3
bag of screws, washers,
spacers for the TV, and spirit level,
4
TV frame,
5
wall mount,
6
cover caps,
7
a template,
8
velcro for your cables.
Your own tools
Cross-head screwdriver, pipe locator, 5 mm drill, 10 mm drill, pencil, tape
measure, hammer, impact or concrete drill and a cup of coffee.
45 minutes 2 people 4 coffees
WALL MOUNT.
Brace yourself.
1 2
3
4
6
1
3
2
4
6
5
7
8

Lift the TV with 2 people and hook the TV
frame onto the arm of the mount.
Draw an X on the wall where the middle of
the TV should align.
Place the template
7
on the wall and
draw the drill holes using the spirit level
(M-L)
3
.
Tighten the television with the small black
screws, that you loosened in step 1.
Tilt the mount to the desired angle and
secure it in place with a hex key.
Drill the wall mount onto the wall. Use the
spirit level for accuracy. Place the cover
caps
6
on the wall mount.
Drill with precision by first using the 5mm
drill, and then the 10mm drill. Drill as deep
as the screws (W-A)
2
are in length.
Hammer the plugs (W-B)
2
into the drill
holes.
Need help?
Call 010 798 89 99 or visit
Coolblue.nl/en/
customer-service
Prior to drilling:
Use the pipe locator to check
if there aren’t any pipes or
cables behind the wall.
Detach the TV frame from the arm with the
wrench. Place the TV frames
4
on your TV
as pictured. Look in bags M-A through M-H
1
for the screw that fits your TV. You only
need 1 set of screws. “Attach the frame to
the TV with screws. Place washer (M-I)
3
or spacer (M-J or M-K)
3
in between.
Suitable surface area:
Solid brick
Solid concrete
BBRWM3243
Coolblue isn’t liable for any damage, accidents,
or arguments with boy/girlfriends as a result of
incorrect installation. Not sure if you can do this
on your own? Ask a skilled installation expert
for advice.
INSTALL THE FRAMES
1.MARK DOWN THE WALL
2.DRILL
3.
HANG THE TV
5.SECURE THE WALL
MOUNT
6.
INSTALL THE WALL MOUNT
4.
CHECKLIST.
You’re 50% there.