COP 15-S904 User manual

Instructions
Tel: [phone] Fax: [phone]
For more instructions & support material, please visit our website at:
http://www.cop-eu.com
1

THE MATRIX SWITCHER FOR CCD CONTROL SYSTEM
A FULL IDEA, DESIGN PRODUCTS FOR CCD SYSTEM, 3 FUNCTIONS BUILT-IN ONE SET BUT
JUST ONE PRICE. FULLY MICRO CONTROLLER, PROGRAMMER “ON SCREEN” DISPLAY
SYSTEM.
Features:
Auto switch from 1-4 cameras input for model 15-S904 and 1-8 camera input for model
15-S908. Audio/ Video input and output.
Dual system ( NTSC / PAL ) judged by channel CH1
Channel by pass
Channel fix (home)
Channel display and timer generator for Date/ Time.
2 monitors output with pre-programmer channel output (Video output splitter)
Duty time adjusted.
IR remote control
Menu status memory
CE/UL/CSA/YUV approved power pack.
Model No.: 15-S904 Size: 330mm ( l ) x 120mm ( w ) x 40mm
( h )
1-4 Channels
Size: 230mm ( l ) x 120mm ( w ) x 40mm
( h )
Model No.: 15-S908
1-8 channels
2

Model No
Specification
15-S904 15-S908
Channel no. 4 (Ch1~Ch4) 8 (Ch1~Ch8)
Power consumption 100mA
Power sources DC 9~12V Adaptor
Video I/P & O/P 1 v p-p composite/ 75Ω
3

OPERATION INSTRUCTION
THIS TWO MODEL ARE OPERATING WITH ON SCREEN CONTROL AND ITEM GENERATOR
ARE BUILT-IN BEFORE YOU STAR TO USE SWITCHER, YOU NEED SET-UP THE FUNCTION SHOW
ON SCREEN FIRST.
PANEL:
SCAN1 SCAN2 BY PASS MODE MUTE
I
O
FUNCTION
ON
OFF
PO WER
I.R. REC EIVER
"SCAN"
SELEC TED KEY
RESERVATIO N/
REMOVEMENTKEY
MUTE KEY
UP KEY
DOWN KEY
KEY PAD
FRO NT VIEW
AUDIO IN AUDIO OU
12345678
VIDEO IN VI OU
PO WER
T
12
DEO T
PO WER
AUDIO IN AUDIO
VIDEO IN
12341
O UT
VID EO O UT
2
15-S904
BAC K VI E
W
15-S908
BAC K VI E
W
4

5
KEY FUNCTION
POWER I ON
O OFF
If lost power source 12 VDC, switcher off, we keep the memory
programmed functions.
IR receiver Photo electric receiver
Scan 1 Key selection mode scan or home video out1
The selection scan or home can be on menu or operator modes.
(MENU is after press the key “MODE”. OPERATOR is normal use condition.)
In mode SCAN, The channel number 1 to 4(or 8) “FLASH”, intermittent.
In mode Home, the channel number is FIX.
The channel number 1 to 4 (or 8) is the number on the TOP of the LEFT side
of the screen.
Scan 2 Same as SCAN1 but for Video OUT 2
BY-PASS Key selection channel in the SCAN Video OUT 1 and Video OUT 2.
This selection should be on mode menu only.
Key without function in user mode.
Mode Key setup MENU, the full MENU appears on the screen
Or modification SETUP next line. 1 impulse on “MODE” give access to the
next line
▼ Key decrease the selection channel on SCAN HOME
Key decrease the data or modification position marker
▲Key increase the selection channel on SCAN HOME
Key decrease the data or modification position marker
mute Key selection with or without SOUND (MUTE)

6
SETUP function scan
Matrix Switcher ON, Monitor connected to the connector VIDEO OUT 1 ON and only 1,
with or without camera connected to the Video IN.
The Screen of the monitor is White or you can see the camera 1 if you have 1 camera
connected on Video IN 1.
Press key “MODE”
The screen will show: is flashing or intermittent
Model 15-S904
Table No:1-1
Duty 03
Out 1 12 - -
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON
Model 15-S908
Table No: 1-2
Duty 03
Out 1 12 - - - - - -
Out 2 12 - - - - - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON
Note: after 5 sec without action in the MENU, the switcher return in OPERATOR mode
The SETUP MENU is similar for the Model 15-S904 and 15-S908
Also if you have a monitor with AUDIO you have some sound in loud- speaker.

7
Press key “MUTE” for stop the sound.
When press key “MUTE”, MUTE appears in the screen
Table No: 2
Duty 03
Out 1 12 - -
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE
MODIFICATION Duty (Scan time)
For modification duty (scan time), press key “▲” or “▼”, adjustable form 1 sec,. To 99 sec.
1 impulse = 1 sec, if you keep the key pressed, 1 impulse = 5 sec.
The duty (scan time is same for all camera and also same for the 2 video out.)
Ex: Press “▲” 2 times: the screen will show
Table No: 3
Duty 05
Out 1 12 - -
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE

8
Selection cameras in the scan video out 1
From the table no.: 1,2 or 3
Press key “MODE” and access to the setup of the next line
Table No: 4
Duty 05
Out 1 12 - -
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE
When the camera number appears, the camera in incorporated in the scan video out 1
This configuration we have camera 1 & 2 in the scan video out 1
If you want to change this configuration
Press the key “▲” or “▼” to move the marker.
Ex: from the table no.: 4 if you press 1 time the key “▲” the screen will show
Table No: 5
Duty 05
Out 1 12 - -
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE

9
If you want to induce the Camera 4 in the scan Video OUT 1
Press key “BY PASS” the screen will show:
Table No: 6
Duty 05
Out 1 12 - 4
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE
If you want to take out 1 camera of the scan video out, press key “▲” or “▼” to move
the masker and press the key “by-pass”, the channel number disappear.
Selection camera in the scan video out 2
From the Table No.5
Press key “MODE” and access to the SETUP of the next line
Table No: 7
Duty 05
Out 1 12 - 4
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE
From modification, operating same as Scan Video OUT 2

10
Setup day/ time generator
From the table No.: 7
Press “mode” and access to the setup of the next line
SETUP “Year”
Table No: 8
Duty 05
Out 1 12 - 4
Out 2 12 - -
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE
For modification Press key “▲” or “▼”
Press key “MODE” and access to the setup of the next line
SETUP “Display”
Table No: 9
Duty 05
Out 1 12-4
Out 2 12--
Year 1999
Month 04
Day 01 SCAN 1
Hour 00
Min 00 SCAN 2
Display ON MUTE
Press key “▲” or “▼”
To Modify Display “ON” or “OFF”
Press key “MODE” to return to operator Mode.

A remote control
SC A N 2
B. P.
MODE
SC A N 1
MUTE
Made in Taiwan
11

WIRE TYPE MATRIX SWITCHER
□ 15-S904 □ 15-S908
USER MANUAL
12