Corewise Smart Mobile PAD User manual

1
Smart Mobile PAD
User Manual

2
Introduction
Thank you for using our product.
Before the use, please read clearly the user manual.
Product standard: GAT 1011-2012 ,ISO14443 Type A/B ，
ISO15693 International Standard.
Note: * Marked terminal only for certain models, or
optional part of some terminals, or only customized
supply at certain times. Specific configuration of products
subjects to contract and list agreed by both sides.
Statement
A370 (Class A product) may cause radio interference in the living
environment, in which case the user might be required to take
adequate measures.

3
Overview
Main performance indicators
Operating System: Android 6.0
*Networks:
GSM: 850/900/1800/1900
WCDMA: B1/B2 CDMA: BC0 TD--CDMA: B34/B39
TD-LTE: B38/B39/B40/B41 FDD-LTE: B1/B3
Screen: 7 inch HD LCD (Resolution:600*1024)
Processor: 1.2G(Quad core)
*Bluetooth: BT4.0 LE
*WiFi: IEEE 802.11a/b/g/n
Camera: Rear 8.0M,auto focus,flashlight.

4
USB interface: Mini-USB 10pin,support peripherals like
external U flash disk,keyboard,card reader,printer.
*Fingerprint resolution: Capacitive sensor,collection and
identification time <1s,508DPI.
IC card: ISO/IEC 14443 A,ISO/IEC 14443 B,ISO 15693
supported.
UHF RFID: ISO18000-6C supported; reading distance 0~5m.
*Bar code scanner: 1D/2D bar code supported(laser).
Working environment:
Temperature:0℃~50℃; Humidity: 20%~90% RH
Dimension:220*132*26.5mm
Weight: 760g

5
Catalog
I. Product Appearance Introduction..............................................6
II. Status bar Icons..........................................................................9
III. Use Guide................................................................................ 10
Important notes....................................................................... 10
Battery charging...................................................................... 10
Connect the terminal to PC................................................... 10
IV. Basic Functions....................................................................... 11
Unlock and lock the screen....................................................11
Use applications...................................................................... 11
Check notifications..................................................................12
Input texts.................................................................................13
Show keyboard.................................................................14
V. Detailed Functions Introduction............................................. 15
RFID application......................................................................15
*Fingerprint collection application......................................... 15
UHF RFID tag reader............................................................. 16
QR code scanner.................................................................... 16
Photo/Video............................................................................. 17
Copy files..................................................................................17
Easy tools.................................................................................18
VI.Simple Troubleshooting Instructions..................................... 19

6
I. Appearance Introduction

7

8
Power key: Long press to power on/off.
Volume key: Adjust volume.
Reset key: Restart the terminal.
Charger interface: Connect charger.
USB interface: Connect USB cable to PC.
*Fingerprint induction area: Press your finger in this area when
collecting the fingerprint.
RFID induction area: Put RFID cards in this area.
Indicator light:
To display the device in a certain state;
From left to right:
→Charging indicator: Charging state is red, full charging state turns
green.
→Power-on light: Device will be powered on before using
fingerprint function,the indicator turns blue.
→*Fingerprint light: Blue light flashes in process of collecting.
→RFID light: Light flashes once in blue when reading RFID cards.
UHF RFID induction area: When reading UHF RFID tags, please
put the tags in the range of induction area, reading distance differs
from the tags you choose.
Bar code scanner: Put 1D/2D bar codes in the area to scan.

9
II. Status bar icons
Status bar shows time,battery status,signal strength, operator’s
name or note icons.
Status bar icon information at the top of screen:
Status icon
Meaning
Cellular signal
Show your cell phone signal strength, the more bars, the
stronger the signal.
Flight mode.
Show flight mode opened. No call, Internet and Bluetooth
devices.
No network access to the
operators
No network access to the operators, but with signal, for
emergency call only.
WiFi
Show connected to WiFi, the more bars, the stronger the
signal.
Mute
Show in the mute status currently.
SD card detected in error.
Show no SD card insert or stick to test the phone card
with failure.
GPS
Show certain application is using location-based service.
Alarm clock
Show alarm clock setted.
Bluetooth
Show bluetooth opened.
Headset
Show headset inserted.

10
III. Use Guide
Important tips
In order to avoid unnecessary harm, please note the following
information before using the device:
• Do not power on where wireless devices are forbidden to use.
Such as in the planes, places nearby marked no using the phone
like medical facilities and medical equipments.
• Do not power on where the device may cause interference or
danger. Such as gas station, near the fuel,chemicals or bursting
point.
• Please use original accessories and batteries. Do not use
incompatible products.
• Keep the phone dry.
• Have qualified service personnel to repair the phone.
• When connecting to other devices, please refer to the connection
method in the user manual. Don’t connect to incompatible devices.
Battery Charging
With power off status, charging indicator shows battery charge
status.
With power on status, the battery at the lower right corner of the
screen displays battery or charging status.
Please use the supplied charger connecting to the power outlet or
using USB cable connecting to the PC to charge it.
Connect the terminal to PC
Use USB cable connecting to the PC, if connected successfully, the
device will show "USB Connected" prompt.
If with problems when connecting, please operate according to help
guide; According to the guide,install device drivers and tools on the
PC.