Creative Play PT103 User manual

WHEELCHAIR PICNIC BENCH
Installation Instructions
REF: PT103 - WHEELCHAIR PICNIC BENCH
pg 1 of 11
All manuals and user guides at all-guides.com
all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 2 of 11
Parts required
TIMBERS
WPIC 1 QTY x 4
(90mm x 90mm) 525mm
WPIC 2 QTY x 2
(90mm x 90mm) 1632mm
WPIC 3 QTY x 2
(90mm x 90mm) 880mm
WPIC 4 QTY x 12
(120mm x 90mm) 275mm
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 3 of 11
Parts required
x2 (PLAYTEC PICNIC SIDES)
x4 (HEXBOARD SIT ‘A’) x4 (HEXBOARD SIT ‘B’)
x2 (PLAYTEC ‘U’ LEFT)
x2 (PLAYTEC ‘U’ RIGHT)
x1 (PLAYTEC TOP ‘B’ )
x1 (PLAYTEC TOP ‘A’ )
x4 (PLAYTEC ‘T’ PART)
x4 (PLAYTEC INT SIDES)
x2 (PLAYTEC MIDDLE PART)
x4 (PLAYTEC COVER)
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 4 of 11
x6 (M12 NYLOC)
Parts required
x78 (FM80 ‘BRASS SCREW’) x2 (M12 x 200 square cup hex bolt)
x6 (end caps)
x2 (400 THREAD BAR)
x12 (TORK TAINERS)
4 x 12/12/12
8x 18/18
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 5 of 11
NOTES:
Use this block to add additional note....
Foundation details
ANGLE
CLEATS
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 6 of 11
Assembly instructions
1Attach Playtec MIDDLE piece to the TIMBERS (WPIC1,WPIC2)
Using M12 CUP SQUARE BOLTS/THREAD BAR / NYLOCS / END CAPS
2Attach Playtec ’U’ left/right both sides to the TIMBERS
(WPIC1,WPIC3,WPIC4)
Using FM80 BRASS SCREWS
All manuals and user guides at all-guides.com
all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 7 of 11
Assembly instructions
3
4Attach Playtec Picnic SIDES to the TIMBERS
(WPIC1,WPIC3,WPIC4)
Using FM80 BRASS SCREWS
x4
Attach Playtec INT SIDES and COVER to the TIMBERS
(WPIC4)
Using FM80 BRASS SCREWS
x4
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 8 of 11
Assembly instructions
5Attach Playtec TOP ‘A’ and ’B’ to the TIMBER (PICNIC2)
Using FM80 BRASS SCREWS
6Attach Playtecs TOP ‘A’ , ‘B’ and ‘T’ piece
Using TORKTAINERS
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 9 of 11
Assembly instructions
7Attach Hexboard SIT ‘A’ and ’B’ to the TIMBER (WPIC4)
Using FM80 BRASS SCREWS
8Attach Attach Hexboard SIT ‘A’ to SIT’B’
Using TORKTAINERS
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 10 of 11
PARTS REQUIERED (GAMES TOP)
1Attach Playtec top SIDES and Perspex to the PLAYTEC
TOP ’C’
Using M8 BOLTS AND NUTS
Assembly instructions (GAMES TOP)
x1 (PLAYTEC TOP ‘C’ ) x1 (PERSPEX ) x1 (TOP SIDES)
x12
(M8 x 30 socket button bolt)
x12
(M8 ACORN NUT)
All manuals and user guides at all-guides.com

REF: PT103 - WHEELCHAIR PICNIC BENCHpg 11 of 11
Additional dimensions
All manuals and user guides at all-guides.com
all-guides.com