Crystal Image AP-W46 User manual

UM-UV-W46-Q112V1 www.austin-hughes.com
User Manual
dedicated LCD display solutions
Designed and manufactured by Austin Hughes
NAP-W46
Aluminum front bezel
OP-W46
Universal Mounting Open Frame
AP-W46
46” FHD LCD
Front NEMA4 / IP65

UM-UV-W46-Q112V1 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam
age to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam
aged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invali
date its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-UV-W46-Q112V1 www.austin-hughes.com
< Part. 1 > AP-W46 / NAP-W46
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & Installation
Contents
P. 1
P.2 - 3
P. 4
< Part. 4 > Options
4.1 Option Table
4.2 3G / HD / SD-SDI Broadcast-grade input
4.3 MCS Multi-display control solution
4.4 W46" Touchscreen : Multi-touch
4.5 MIL-type or lockable connector
4.6 TV - PAL or NTSC
P.14
P.15
P.16 - 17
P.18
P.19
P.20
< Part. 2 > OP-W46
2.1 Package Content
2.2 Structure Diagram & Dimension
2.3 Mounting Hardware & Installation
P. 5
P.6 - 7
P.8
< Part. 3 > Specifications / OSD / Remote Controller
3.1 Product Specifications
3.2 On-screen Display Operation ( OSD )
3.3 Remote Controller ( RC-2 )
P.9 - 10
P.11 - 12
P.13

UM-UV-W46-Q112V1 www.austin-hughes.com
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4

UM-UV-W46-Q112V1 www.austin-hughes.com
< 1.1 > Package Content - AP / NAP-W46 46" FHD LCD Display
P. 1
< Part 1 >
46" FHD LCD display X 1
6ft VGA cable X 1
6ft DVI-D cable X 1
6ft HDMI cable X 1
6ft RCA cable X 1
6ft S-Video cable X 1
Power cord X 1
Remote controller X 1
Wall-mount bracket set X 1
AP-W46 / NAP-W46

UM-UV-W46-Q112V1 www.austin-hughes.com
Front view
Rear view
Rear case
LCD panel
6mm aluminum front bazel
Audio speaker, pair
LCD membrane
Wall-mount bracket
Remote sensor
1
2
3
4
5
6
Bottom view
7
7
1
2
3
6
5
4
< 1.2 > Structure Diagram - AP / NAP-W46
AP-W46
NAP-W46
P. 2
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
1121 x 82 x 676 mm
44 x 3.2 x 26.6 inch
1457 x 216 x 920 mm
57.4 x 8.5 x 36.2 inch
50 kg
110 lbs
65 kg
143 lbs
Standard I/O : HDMI, DVI-D, Audio, S-VideoRCA, VGA
Options I/O : TV, USB for touchscreen
SDI or MCS ( either one )
AP-W46
NAP-W46
VGADVI-D
HDMI Audio
in S-Video Power
R C A Audio
out

UM-UV-W46-Q112V1 www.austin-hughes.com
P. 3
Side View
Rear View
< 1.2 > Dimension - AP / NAP-W46 46” FHD LCD Display
AP-W46
NAP-W46
UNIT : mm
1mm = 0.03937 inch
Bottom View

UM-UV-W46-Q112V1 www.austin-hughes.com
P. 4
< 1.3 > Wall-mount Installation - AP / NAP-W46
Step
■Install left & right front wall-mount brackets at
the rear side of the LCD shown above.
■M5 screw x 8 pcs included ( Left & right side ).
1
Front wall-mount bracket
Rear side
Step
■Install left & right rear wall-mount brackets on
the wall shown above.
■6 x M10 screws required ( Left & right side ).
M10 screw sets are not provided.
2
Rear wall-mount bracket
Wall
Step
■Attach the LCD to the rear wall-mount brackets
on the wall.
3
Wall
Wall WallLCD
Installation Completed.
Step 4
■No VESA mount provided for 46" and 55”
models. Only wall-mount available.

UM-UV-W46-Q112V1 www.austin-hughes.com
< 2.1 > Package Content - OP-W46
P. 5
< Part 2 >
OP-W46 46" FHD LCD display X 1
6ft VGA cable X 1
6ft DVI-D cable X 1
6ft HDMI cable X 1
6ft RCA cable X 1
6ft S-Video cable X 1
Power cord X 1
Remote controller X 1
46” FHD LCD Display

UM-UV-W46-Q112V1 www.austin-hughes.com
Front view
Rear view
Rear case
LCD panel
Universal open frame mounting
Audio speaker, pair
LCD membrane
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
1
2
3
4
5
Bottom view
6
6
< 2.2 > Structure Diagram - OP-W46
5
4
OP-W46
P. 6
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
1121 x 82 x 676 mm
44 x 3.2 x 26.6 inch
1457 x 216 x 920 mm
57.4 x 8.5 x 36.2 inch
50 kg
110 lbs
65 kg
143 lbs
Standard I/O : HDMI, DVI-D, Audio, S-Video, RCA, VGA
Options I/O : TV, USB for touchscreen
SDI or MCS ( either one )
OP-W46
1
2
VGADVI-D
HDMI Audio
in S-Video Power
R C A Audio
out
3

UM-UV-W46-Q112V1 www.austin-hughes.com
46" FHD LCD Display
P. 7
Front View Side View
Rear View
< 2.3 > Dimension - OP-W46
OP-W46
UNIT : mm
1mm = 0.03937 inch
Bottom View

UM-UV-W46-Q112V1 www.austin-hughes.com
< 2.3 > Installation - OP-W46
P. 8
Universal mount
No VESA mount provided for 46" and 55” models.
Only universal mount available.

UM-UV-W46-Q112V1 www.austin-hughes.com
46” FHD LCD Display
Mechanical
Design AP / NAP-W46 OP-W46
Front Panel Black, RAL 9005 -
Rear Casing Dark grey, RAL 7037 Dark grey, RAL 7037
VESA Mounting 100 x 100mm 100 x 100mm
Other Mounting Panel mount Universal mount
Protection 3mm protective glass
LCD
Panel Manufacturer
Panel Size ( diagonal ) 46-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1920 x 1080
Brightness ( typ. ) 400
Contrast Ratio ( typ. ) 4000:1
Color 16.7 M
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 8
Dot pitch ( mm ) 0.53
Display Area ( mm ) 1018.08H x 572.67V
Surface treatment Haze 2%, Anti-glare
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 30,000
Video
Connectivity Digital HDMI HDMI 1.1, CEA-861-D
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Composite ( RCA ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio
Connectivity Audio Input Connector 3.5mm stereo jack
Impedance / Power level 30kΩ/ 750mV
Audio Output Connector 3.5mm stereo jack
Resistance / Power level 30kΩ/ 2.8V
Speaker Output Power 2 x 10W
*When the audio output is connected, speaker output is OFF
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption Screen display ON 130W or less
Power saving mode 9W or less
Power button OFF 2W or less
< 3.1 > Product Specifications
P. 9
< Part 3 >

UM-UV-W46-Q112V1 www.austin-hughes.com
< 3.1 > Product Specifications
Applicable
Format DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input PC Signal Same as VGA
Video Signal 1080p : 50 / 60Hz
1080i : 50 / 60Hz
720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )
Composite / S-Video
Input
NTSC 525 lines, 60 fields / sec
PAL 625 lines, 50 fields / sec
Physical
Specification AP / NAP-W46 OP-W46
Product ( W x D x H ) 1121 x 82 x 676 mm 1117 x 74 x 672 mm
44 x 3.2 x 26.6 inch 44 x 3.1 x 26.5 inch
Packing ( W x D x H ) 1457 x 216 x 920 mm 1457 x 216 x 920 mm
57.4 x 8.5 x 36.2 inch 57.4 x 8.5 x 36.2 inch
Net Weight 50 kgs / 110 lbs 50 kgs / 110 lbs
Gross Weight 65 kgs / 143 lbs 65 kgs / 143 lbs
Environmental
Conditions Operating Temperature 0 to 50°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Regulatory Safety Approval FCC & CE
P.10

UM-UV-W46-Q112V1 www.austin-hughes.com
< 3.2 > On-screen Display Operation ( OSD ) 46” FHD LCD Display
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
P. 11
Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness : Adjust background black level of the screen image
Contrast : Adjust the difference between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Picture size : Adjust the image size
Color temp : Standard / Cool / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness : Adjust the image from weak to sharp
1
PC
Auto adjust : Automatically adjust sizes, centers and fine tunes the
video signal to eliminate waviness and distortion.
Clock : Adjust the clock value
Phase : Adjust the phase value
H. Position : Align the screen image left or right
V. Position : Align the screen image up or down
2

UM-UV-W46-Q112V1 www.austin-hughes.com
P.12
< 3.2 > On-screen Display Operation ( OSD )
Audio
Audio mode : Movie / Voice / Normal / Music mode to choose
Volume : Adjust the volume of sound
Bass : Set the value of bass sound
Treble : Set the value of treble sound
Balance : Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn off the surrounding sound
3
TV
Auto search : Automatically search
Manual search : Search the TV manual
Fine tune : Fine tune the TV signal
Color system : Adjust the TV color
Sound system : Adjust the TV sound
Channel edit : Edit the channel
4
MISC
Language : Select the language in which the OSD menu is
displayed - English
Sleep timer : Set the off time
PIP mode : Adjust picture in picture setting
PIP position : Enter into PIP position
PIP source : Enter into the Sub source and sound source
System reset : Return the adjustment back to factory setting
Information : Select for Help
5

UM-UV-W46-Q112V1 www.austin-hughes.com
< 4.6 > How to Use the Remote Controller 46” FHD LCD Display
P.13
123
456
AUTO 0-/--
78 9
PIP
MENU SELECT
BACK EXIT
SOURCE POSITION
SWAP PIP
AUDIO
ASPECT
SLEEP
PIP
ENTER
CH
FREEZE
MUTEINPUT
VOL
W
a
t
e
r
p
r
o
o
f
1
4
3
2
5
7
6
20
21
8
9
10
8
11
12
1
12
13
15
16
17
18
1
19
14
14
INPUT Select the source
Switches on or off the TV
0 - 9 Only use in TV mode. Select channels. For channel numbers 10
and above, enter the second digit within two seconds.
AUTO Auto adjust
MENU Display the menu on the screen or go to the previous menu
▲/ ▼/ ◄/ ►/ ENTER
Go to the upper menu or select the previous value /
Go to the next menu or select the next value /
Decrease the setting value /
Increase the setting value or enter to the select item setting
Enter to the select item settings or excude the setting
BACK Back to previous value
MUTE Turn on or off the speaker
Vol + / - Increase or decrease the speaker volume
CH + / - For TV model only, increase or decrease the channel number
FREEZE Reserve for OEM model
- / -- For setting input single or double digits
ASPECT Adjust the screen size
SELECT To select the existing item
SLEEP Select the sleeping time
EXIT Exit the menu or cancel
PIP functions
PIP Picture in picture
PIP AUDIO To set the audio of in PIP mode
POSITION To set the screen position in PIP mode
SOURCE PIP Source
SWAP Swap screen in PIP mode
1
8
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21

UM-UV-W46-Q112V1 www.austin-hughes.com
< 4.1 > Option Table
< Part 4 > Options
Basic Options AP / NAP OP
SDI ***
Touchscreen
MCS multi-screen control ***
MIL-type / lockable connector
TV
The user can only select either SDI or MCS inputs.
***
P.14

UM-UV-W46-Q112V1 www.austin-hughes.com
< 4.2 > Options : 3G / HD / SD-SDI input
P.15
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable 3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
Austin Hughes’ SDI input is an ideal solution for the broadcast-
grade video and high resolution CCTV market.
Designed for use with UltraView Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, Austin Hughes provides a
SDI input module without using additional space or power and it
comes standard with a 2-year warranty.
VGADVI-DHDMI S-Video Power R C A
SDI
in - out
Audio
in
Audio
out
46” FHD LCD Display

UM-UV-W46-Q112V1 www.austin-hughes.com
For the 1st and last display,
push the set switch downward
Set switch
For other daisy chain displays,
push the set switch upward
VGADVI-DHDMI S-Video PowerR C A
Link
Audio
in
Audio
out
MCS
in out set
< 4.3 > Options : MCS 46” FHD LCD Display
LINK OUT IN OUT
RS-232C
Cat5 / 6 cable
max. 300 meters
up to 64 displays
Daisy chain up to 1,000
meters and 64 displays
RJ-45 jack
IN OUT IN OUT
Cat5 / 6 cable
max. 300 meters
Cat5 / 6 cable
max. 300 meters
15 feet serial cable
( over 15 feet, extender required )
P.16
More control is always good. Especially when it is necessary and
easy. Austin Hughes provides MCS solution to control the OSD of
various UltraView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and
the first display via a 15 feet serial cable while the CAN bus is
used for the various LCD displays cascade together via CAT 5/6
cable, and daisy chain up to 1,000 meters.
Designed for use with UltraView LCD displays, Austin Hughes
provides a MCS input module without using additional space or
power and it comes standard with a 2-year warranty.
MCS
( Multi-display Control )