CYP CPT-385AM User manual

CPT-385AM
PC to Video Converter Box
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.0 January 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 18/01/12 Preliminary Release
RDV2 26/07/12

CONTENTS
1. Introduction............................................1
2. Applications...........................................1
3. Package Contents ................................1
4. System Requirements............................1
5. Features..................................................1
6. Operation Controls and Functions.......2
6.1 Front Panel........................................2
6.2 Rear Panel.........................................2
6.3 Side Panel.........................................3
6.4 Top Panel..........................................3
7. Connection and Installation.................4
8. Specications ........................................5
9. Acronyms...............................................6

1
1. INTRODUCTION
The PC to Video scan converter box is designed to convert a variety
of computer images, from VGA to WUXGA, to interlaced NTSC or PAL
video. With frame rate conversion and Overscan / Underscan features
that allows users to view PC source on the Composite and S-Video
monitor without image cutting off.
2. APPLICATIONS
• Video conference
• Business presentation
• Lecturing room
3. PACKAGE CONTENTS
• PC to Video Converter box
• 5V DC power supply adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Input source equipment such as PC and output to Composite and
S-Video monitor, Projector or TV.
5. FEATURES
• Automatically detects and down converts the incoming PC images
to NTSC or PAL
• Support high resolution PC input timing from VGA to WUXGA
• Scale down PC video to Composite/S-Video
• Switch between NTSC/PAL
• Image Overscan/Underscan selection

2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PC
INPUTDC
5V
1 2
1PC INPUT
Connect the VGA input port to the VGA output port of your source
equipment such as computer with D-Sub 15pin cable.
2DC 5V
Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet.
6.2 Rear Panel
OUTPUT
S-VIDEO VIDEO UNDER SCAN
OVER SCAN
1 2 3
1S-VIDEO OUT
Connect the S-Video output port to the S-Video input port of
analog monitor, Projector or TV.
2VIDEO OUT
Connect the Composite Video output port to the Composite
Video input port of analog monitor, Projector or TV.
3UNDERSCAN /OVERSCAN
Switch in between the Underscan/Overscan of the output image
especially when connecting to different monitor/TV.

3
6.3 Side Panel
NTSC PAL
1
1NTSC/PAL Switch
Switch the output display image between NTSC or PAL system. The
device will auto adjust the output image including the size, phase
and position and while adjusting the power LED will blink.
Note: Source input signal must have a full screen image in order to
allow the auto adjustment function to perform successfully.
6.4 Top Panel
POWER
PC to Video
1
1POWER & LED
Press this button to switch ON the device and the LED will illuminate
in green or set it to standby mode and the LED will turn red.

4
7. CONNECTION AND INSTALLATION
OR
HD TV
PC NB

5
8. SPECIFICATIONS
Input port 1 x VGA
Output ports 1 x Composite, 1 x S-Video
Input Resolution PC: 640x480 = VGA@60, 72, 75, 85
720x400@70, 576p,
800x600 = SVGA@56, 60, 72, 75, 85
1024x768 = XGA@60, 70, 75, 85
1152x864 = MAC@70, 75, 85
720p@25,30,50,60,60cvt
1280x768 = WXGA@60RB, 60
1280x800 = WXGA@60RB, 60, 75
1280x960 = @60, 85,
1280x1024 = SXGA@60, 75, 85, 60cvt
1366x768 = WXGA@60RB, 60
1440x900 = WXGA@60RB, 60, 75
1600x1200 = UXGA@60
1680x1050 = WSXGA+@60RB, 60
1080p@24,25,30,50,60
1920x1200 = WUXGA@60RB
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL
certied)
Dimensions 64mm(W) x 113mm(D) x 26mm(H)
Weight 90g
Chassis Material Plastic
Silkscreen Color Gray
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 5W (Max)