D.A.S. Action 12A User manual

action active series
User’s Manual
Antes de utilizar el equipo, lea la sección
“Precauciones de seguridad” de este manual.
Conserve este manual para futuras consultas.
Before operating the device, please read the
“Safety precautions” section of this manual.
Retain this manual for future reference.

CONTENTS
6 a 7
8 a 13
2x action 12A (action 15A)
2x action 12A (action 15A) + 1x action 18A
2x action 12A (action 15A) + 2x action 18A
2x action 12A (action 15A) + 2x action 218A
2x action 215A
4x action M12A
Manual del Usuario / action active / User’s Manual
INTRODUCTION
LINE DRAWINGS
3
4
5
14
18
21
15 a 17
19 a 20
AMPLIFIER
SPECIFICATIONS
RIGGING SYSTEM
APPENDIX
Description
ON / OFF
Overload indicators
Overheating
Equalisation
Low mains voltage
Current consumption
CONFIGURATIONS
Troubleshooting
Line connections: unbalanced and balanced
SAFETY PRECAUTIONS
WARRANTY
DECLARATION OF CONFORMITY

Precauciones de Seguridad
Safety Precautions
Cajas acústicas activas / Self-powered loudspeaker enclosures
action active series
The exclamation point inside an equilateral triangle is intend to
alert the users to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product. Heed all warnings. Follow all
instructions. Keep these instructions.
WARNING: This is a class A product. In a domestic environment
this product may cause radio interferences in which case the
user may be required to take adequate measures.
Use this product only in E1, E2, E3 or E4 environments
according to EN55103-2.
El signo del rayo con la punta de flecha, alerta contra la
presencia de voltajes peligrosos no aislados. Para reducir el
riesgo de choque eléctrico, no retire la cubierta.
Sólo use este equipo con el cable de red de alimentación
adecuado para su país.
The lightning and arrowhead symbol warns about the presence
of uninsulated dangerous voltage. To reduce the risk of electric
shock, do not remove the cover.
Only use this equipment with an appropriate mains cord for your
country.
Desconecte este aparato durante tormentas eléctricas,
terremotos o cuando no se vaya a emplear durante largos
periodos.
Unplug this apparatus during lightning storms, earthquakes or
when unused for long periods of time.
Equipo diseñado para funcionar entre 15ºC y 42ºC con una
humedad relativa máxima del 95%, con un rango de ±10% de la
tensión nominal de alimentación indicada en la etiqueta trasera
(según IEC 60065:2001). Si debe sustituir el fusible preste
atención al tipo y rango.
Working temperature ranges from 15ºC to 42ºC with a relative
humidity of 95%, with ±10% of the rated main voltage value
indicated on the rear label (according to IEC 60065:2001). If the
fuse needs to be replaced, please pay attention to correct type
and ratings.
No instale el aparato cerca de ninguna fuente de calor como
radiadores, estufas u otros aparatos que produzcan calor. Debe
instalarse siempre sin bloquear la libre circulación de aire por las
aletas del radiador.
Si los altavoces action se utilizan al aire libre en un día soleado,
colocar los altavoces en un área sombreada o a cubierto. Los
amplificadores de los altavoces tienen circuitos de protección
que silenciarán temporalmente el altavoz cuando las
temperaturas que se alcanzan sean extremadamente altas. Esto
puede suceder en los días calurosos cuando el altavoz esté
expuesto a la luz solar directa.
Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus that produce heat. The
circulation of air through the heatsink must not be blocked.
If action loudspeakers are used outdoors on a sunny day, place
the loudspeakers in a shaded or covered area. The loudspeaker
amplifiers have protection circuits that temporarily shut the
loudspeaker off when extremely high temperatures are reached.
This can happen on hot days when the loudspeaker is in direct
sunlight.
No exponga este equipo a la lluvia o humedad. No use este
aparato cerca del agua (piscinas y fuentes, por ejemplo). No
exponga el equipo a salpicaduras ni coloque sobre él objetos
que contengan líquidos, tales como vasos y botellas. Equipo IP-
20.
Do not expose this device to rain or moisture. Do not use this
apparatus near water (for example, swimming pools and
fountains). Do not place any objects containing liquids, such as
bottles or glasses, on the top of the unit. Do not splash liquids
on the unit. IP-20 equipment.
No emplace altavoces en proximidad a equipos sensibles a
campos magnéticos, tales como monitores de televisión o
material magnético de almacenamiento de datos.
Do not place loudspeakers in proximity to devices sensitive to
magnetic fields such as television monitors or data storage
magnetic material.
Este símbolo indica que el presente producto no puede ser
tratado como residuo doméstico normal, sino que debe
entregarse en el correspondiente punto de recogida de equipos
eléctricos y electrónicos.
This symbol on the product indicates that this product should
not be treated as household waste. Instead it shall be handed
over to the appicable collection point for the recycling of
electrical and electronic equipment.
El cableado exterior conectado al equipo requiere de su
instalación por una persona instruida o el uso de cables flexibles
ya preparados.
The outer wiring connected to the device requires installation by
an instructed person or the use of a flexible cable already
prepared.
Si el aparato es conectado permanentemente, la instalación
eléctrica del edificio debe incorporar un interruptor multipolar con
separación de contacto de al menos 3mm en cada polo.
If the apparatus is connected permanently, the electrical system
of the building must incorporate a multipolar switch with a
separation of contact of at least 3mm in each pole.
No desconecte la tierra en el conector de alimentación pues es
peligroso e ilegal. Equipo de Clase I. Do not remove mains connector ground, it is dangereous and
illegal. Class I device.
El colgado del equipo sólo debe realizarse utilizando los herrajes
de colgado recomendados y por personal cualificado. No
cuelgue la caja de las asas.
The appliance should be flown only from the rigging points and
by qualified personnel. Do not suspend the box from the
handles.
No existen partes ajustables por el usuario en el interior de este
equipo. Cualquier operación de mantenimiento o reparación
debe ser realizada por personal cualificado. Es necesario el
servicio técnico cuando el equipo se haya dañado de alguna
forma, como que haya caído líquido o algún objeto en el interior
del aparato, haya sido expuesto a lluvia o humedad, no funcione
correctamente, haya recibido un golpe o su cable de red esté
dañado.
No user serviceable parts inside. Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
action-12A ------------->115 cm
action-15A ------------->105 cm action-12A ------------->115 cm action-15A ------------->105 cm
Para las cajas con vaso para trípode, la altura máxima de
seguridad desde el suelo a la base de la caja montada sobre
trípode modelo TRD-2, con pies a 55 cm del eje del trípode, es:
For enclosures with tripod socket, the maximum safety height
from floor to bottom of enclosure when mounting on a TRD-2
tripod, with legs spread 55cm from the central pole, is:
El signo de exclamación dentro de un triángulo indica la
existencia de importantes instrucciones de operación y
mantenimiento en la documentación que acompaña al producto.
Conserve y lea todas estas instrucciones. Siga las advertencias.
ATENCIÓN: Es un producto clase A, por lo que en entornos
domésticos puede causar radio-interferencias, en cuyo caso el
usuario tendrá que tomar las medidas oportunas.
De acuerdo con EN55103-2, usar el equipo sólo en entornos E1,
E2, E3 ó E4.
55 cm
Manual del Usuario / action active / User’s Manual 3
Limpie con un paño seco. No use limpiadores con disolventes.
La reventa del producto sólo es posible incluyendo el manual de
usuario. Cualquier cambio producido en el producto tiene que
ser documentado por escrito y aprobado por el comprador en el
momento de la reventa.
Clean only with a dry cloth. Do not use any solvent based
cleaners.
Reselling of the product is only possible if the user manual is
aviable. Any changes made to the product have to be
documented in writing and passed on to the buyer in the event
of resale.

GARANTÍA
WARRANTY
Todos nuestros productos están garantizados por un periodo de 24
meses desde la fecha de compra.
Las garantías sólo serán válidas si son por un defecto de
fabricación y en ningún caso por un uso incorrecto del producto.
Las reparaciones en garantía pueden ser realizadas,
exclusivamente, por el fabricante o el servicio de asistencia técnica
autorizado.
Otros cargos como portes y seguros, son a cargo del comprador
en todos los casos.
Para solicitar reparación en garantía es imprescindible que el
producto no haya sido previamente manipulado e incluir una
fotocopia de la factura de compra.
All D.A.S. products are warrantied against any manufacturing defect
for a period of 2 years from date of purchase.
The warranty excludes damage from incorrect use of the product.
All warranty repairs must be exclusively undertaken by the factory
or any of its authorised service centers.
To claim a warranty repair, do not open or intend to repair the
product.
Return the damaged unit, at shippers risk and freight prepaid, to
the nearest service center with a copy of the purchase invoice.
4Manual del Usuario / action active / User’s Manual

DECLARACIÓN DE CONFORMIDAD
DECLARATION OF CONFORMITY
D.A.S. Audio, S.A.
C/ Islas Baleares, 24 - 46988 - Pol. Fuente del Jarro - Valencia. España
(Spain).
Declara que la serie action:
Declares that action series:
Cumple con los objetivos esenciales de las Directivas:
Abide by essential objectives relating Directives:
lDirectiva de Baja Tensión (Low Voltage Directive) 2006/95/CE
lDirectiva de Compatibilidad Electromagnética (EMC) 2004/108/CE
lDirectiva RoHS 2002/95/CE
lDirectiva RAEE (WEEE) 2002/96/CE
Y es conforme a las siguientes Normas Armonizadas Europeas:
In accordance with Harmonized European Norms:
lEN 60065:2002 Audio, video and similar electronic
apparatus. Safety requirements.
lEN 55103-1:1996 Electromagnetic compatibility.
Product family standard for audio, video, audio-
visual and entertainment lighting control apparatus
for professional use. Part 1:Emission.
lEN 55103-2:1996 Electromagnetic compatibility.
Product family standard for audio, video, audio-
visual and entertainment lighting control apparatus
for professional use. Part 2:Immunity.
5
Manual del Usuario / action active / User’s Manual

INTRODUCTION
action 12A
-Two-way powered system
-12" bass loudspeaker
-Compression driver with titanium diaphragm
-Asymmetric enclosure design for stage monitor
use
-Built-in rigging points (eyebolt based)
-Stand mountable
The action 12A is a powered loudspeaker (2
channel Class D amplifier), that utilizes a 12” low
frequency transducer and a 1” exit compression
driver. The multi-angle cabinet is constructed of
Birch plywood protected by an environmentally
friendly black paint finish. Two bar handles and a
steel grille are provided. A 35mm tripod socket
allows for stand mounting.
action 15A
-Two-way powered system
-15" bass loudspeaker
-Compression driver with titanium diaphragm
-Asymmetric enclosure design for stage monitor
use
-Built-in rigging points (eyebolt based)
-Stand mountable
This is a powered loudspeaker (2 channel
Class D amplifier), utilizes a 15” low frequency
transducer and a 1” exit compression driver with
titanium diaphragm. The cabinet is constructed of
Birch plywood and finished with an environmentally
friendly black paint finish. Two bar handles are
provided and a steel grille protects components. A
35 mm tripod socket allows for stand mounting.
Rigging points provide a safe and simple solution
for suspending the action 15A.
action M12A
-Dedicated powered stage monitor
-12" bass loudspeaker
-Compression driver with titanium diaphragm
-Low profile enclosure design for minimum
visual impact
-Black paint finish
-Stand mountable
The action M12A is a dedicated powered stage
monitor (2 channel Class D amplifier). The
enclosure is constructed from Birch plywood and
is protected with a black paint finish. Two side
located handles facilitate handling and a steel grille
protects the components. A pole mount socket
adds versatility to the action M12A.
Features
The action series inherits the exceptional sound quality and rugged build that have made D.A.S.
professional systems an internacional sound reinforcement standard. Designed from “real-world” experience,
they offer users outstanding performance, absolute reliability, and unparalleled convenience. Whether it is in a
high-profile venue or on the stage of a major event, the action series will provide the power and definition
needed to make your performance a success.
6Manual del Usuario / action active / User’s Manual

7
action 215A
-2-way powered system
-2 x 15" bass loudspeaker
-Compression driver with titanium diaphragm
-Two steel-reinforced handles
The action 215A is a powered loudspeaker (2
channel Class D amplifier), that utilizes two 15”
bass loudspeakers for extra low frequency punch
and higher SPL. High frequencies are handled by a
1” compression driver with titanium diaphragm. The
trapezoidal cabinet is constructed using Birch
plywood and protected with a hard-wearing black
paint finish. Two bar handles and a steel grille
sealed against corrosion using a polyamide powder
coat finish are provided. Rigging points provide a
safe and simple way to fly the action 215A cabinets.
action 18A
-Bass-reflex powered subwoofer system
-18" low frequency transducer
-Precise and powerful bass reproduction
-Top located pole mount socket
The action 18A bass powered system (Class D
amplifier) incorporates a 18” low frequency
transducer with a 4 " voice coil mounted as a
direct radiator into a bass-reflex cabinet. The
loudspeaker is protected by a perforated steel
grille, sealed against corrosion using a powder
coat finish. The action 18A is designed for use in
biamped systems. A top located pole-mount
socket permits mounting full-range systems above
the action 18A and two bar handles makes moving
easy.
action 218A
-High output bass-reflex powered subwoofer
system
-Twin 18" loudspeakers
-Durable black paint finish
-Side located bar handles
This bass-reflex powered subwoofer system
uses dual 18" bass loudspeakers equipped with 4"
voice coils. The exceptional power handling
capacity and efficiency provide high sound
pressure levels of powerful bass. Two hand
locations facilitate handling. The cabinet is
designed to be stacked in the vertical position in
order to reduce the units "on-stage" footprint.
Manual del Usuario / action active / User’s Manual

CONFIGURATIONS
8
TRD-2
action 15A (or action 12A)action 15A (or action 12A)
TRD-2
Mixer
LR
DSP-26
INPUTS
AB
Manual del Usuario / action active / User’s Manual
230V 1.2A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
INPUT
N1918
action 12A
BOOST
/ FLAT
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
INPUT
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
action 15A
BOOST
/ FLAT
230V 1.5A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN

9
Mixer
action 18A
TRD-2
TRD-2
DSP-26
INPUTS
AB
action 12A (or action 15A)action 12A (or action 15A)
CONFIGURATIONS (cont’d)
LR
Manual del Usuario / action active / User’s Manual
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE
WARNING: THIS PRODUCT MUST BE GROUNDED
REFER TO INSTRUCTIONS MANUAL FOR CONNECTION
NO USER SERVICEABLE PARTS INSIDE
ATENCIÓN: PARA REDUCIR EL RIESGO DE FUEGO O DESCARGAS ELÉCTRICAS NO
EXPONGA ESTE EQUIPO A LA LLUVIA NI A LA HUMEDAD
ATENCIÓN: ESTE APARATO DEBE CONECTARSE A TIERRA
VEASE MANUAL DE INSTRUCCIONES PARA LA CONEXIÓN
NO EXISTEN PARTES AJUSTABLES POR EL USUARIO EN EL INTERIOR DEL EQUIPO
CAUTION ATTENTION
risk of electric shock
do not open danger d’electrocution ne pas ouvrir
CAUTION ATTENTION
HOT SURFACE,
AVOID CONTACT TEMPERATURE ELEVEE! NE PAS TOUCHER!
N1918
D.A.S. AUDIO S.A. (Valencia) SPAIN
INPUT
SIGNAL SATELLITE OUTPUT
INPUT A INPUT B OUTPUT A OUTPUT B
THRU
HPF
LIMIT SIGNAL ON
PHASE
180º
POWER
115/230V 50/60HZ 800W
T5AL 250V FOR 230V INPUT
T9AL 250V FOR 115V INPUT
SUB LEVEL
MIN 60HzMAX 160Hz
0º
LOW-PASS
CROSSOVER
100Hz
Class D Power Amplifier
action 18A
22000001
230V 1.2A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
INPUT
N1918
action 12A
BOOST
/ FLAT
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
INPUT
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
action 15A
BOOST
/ FLAT
230V 1.5A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN

10
TRD-6
action 18A
TRD-6
action 18A
action 12A (or action 15A)
action 12A (or action 15A)
CONFIGURATIONS (cont’d)
Mixer
DSP-26
INPUTS
AB
LR
230V 1.2A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
INPUT
N1918
action 12A
BOOST
/ FLAT
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
INPUT
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
action 15A
BOOST
/ FLAT
230V 1.5A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
Manual del Usuario / action active / User’s Manual
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE
WARNING: THIS PRODUCT MUST BE GROUNDED
REFER TO INSTRUCTIONS MANUAL FOR CONNECTION
NO USER SERVICEABLE PARTS INSIDE
ATENCIÓN: PARA REDUCIR EL RIESGO DE FUEGO O DESCARGAS ELÉCTRICAS NO
EXPONGA ESTE EQUIPO A LA LLUVIA NI A LA HUMEDAD
ATENCIÓN: ESTE APARATO DEBE CONECTARSE A TIERRA
VEASE MANUAL DE INSTRUCCIONES PARA LA CONEXIÓN
NO EXISTEN PARTES AJUSTABLES POR EL USUARIO EN EL INTERIOR DEL EQUIPO
CAUTION ATTENTION
risk of electric shock
do not open danger d’electrocution ne pas ouvrir
CAUTION ATTENTION
HOT SURFACE,
AVOID CONTACT TEMPERATURE ELEVEE! NE PAS TOUCHER!
N1918
D.A.S. AUDIO S.A. (Valencia) SPAIN
INPUT
SIGNAL SATELLITE OUTPUT
INPUT A INPUT B OUTPUT A OUTPUT B
THRU
HPF
LIMIT SIGNAL ON
PHASE
180º
POWER
115/230V 50/60HZ 800W
T5AL 250V FOR 230V INPUT
T9AL 250V FOR 115V INPUT
SUB LEVEL
MIN 60HzMAX 160Hz
0º
LOW-PASS
CROSSOVER
100Hz
Class D Power Amplifier
action 18A
22000001

Mixer
DSP-26
INPUTS
AB
TRD-6
action 218A
action 15A (or action 12A)
TRD-6
action 218A
action 15A (or action 12A)
11
CONFIGURATIONS (cont’d)
LR
230V 1.2A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
INPUT
N1918
action 12A
BOOST
/ FLAT
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
INPUT
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
action 15A
BOOST
/ FLAT
230V 1.5A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
Manual del Usuario / action active / User’s Manual
115V 3.6A 50Hz/60Hz
AC INPUT
MAX. 3 UNITS IN PARALLEL
AC OUTPUT
OUTPUT A OUTPUT B
HPF/THRUOFF/ON
SATELLITE X-OVERLOGO
LIMIT
SIGNAL
ON
DEEP/LOUD
PRESET
- +
POLARITY
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
T25 A L 250V FUSE
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE REPLACE
ONLY WITH THE SAME TYPE
LEVEL
+6-oo
0LOW-PASS
160Hz100Hz
125Hz
action 218A
D.A.S. Audio, s.a. (Valencia)
MADE IN SPAIN
22000001

12
action 215A action 215A
CONFIGURATIONS (cont’d)
Mixer
LR
DSP-26
INPUTS
AB
Manual del Usuario / action active / User’s Manual
INPUT
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
action
215A
BOOST
/ FLAT
230V 1.8A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN

13
CONFIGURATIONS (cont’d)
action M12A
action M12A
action M12A
action M12A
Mixer
LR
DSP-26
INPUTS
AB
Manual del Usuario / action active / User’s Manual
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMITSIGNALON
LEVEL
MAIN /
MONITOR
MIC/LINE
+12
-oo
0
OFF/ON
LOGO
LOOP THRU
INPUT
230V 1.2A 50Hz/60Hz
action M12A
D.A.S. Audio, s.a.
(Valencia)
MADE IN SPAIN
22000001

LINE DRAWINGS
ALL DIMENSIONS IN MILIMETERS
14
action M12Aaction 15Aaction 215Aaction 18Aaction 218A action 12A
Bottom View
324
Right ViewFront View
378
653
Rear View
624
Rear View
650
Top View Right View
540
Front View
Rear View
1067
Right View
540
Front View
Top View
670
Rear View
474
Bottom View
1154
Right View
447
Front View
436
Bottom View
774
Right View
446
Front View Rear View
645
420
316
Bottom View Right View
Front View Rear View
Manual del Usuario / action active / User’s Manual
W
EQ
AURIN
PIM
NEGN: T
TO T O
RE
RDAUIN
C E
O R
R IMSK
O I
O
SFT U
FRIREE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
W
RE
AFRENRIN
TGO:
IT
NHSISTR
PURCOTD
IO
UNCST MMAUNSUT ABLE F G
ORRO C
UONNDNEEDCTION
NO USER SERVICEABLE PARTS INSIDE
A
ETXEPNOCNIG
ÓAN :
E
P
SATREA E
R
QEUDIP
UOC I
A
R L EAL L R
LIU
EVSIG
A ON I
D
AE L
F
AU H
EUGMOE O
D A
DDESCARGAS ELÉCTRICAS NO
A
VTEEANSCEI ÓMNA:N
E
USATLE D
A
EP IANRSATTROU DCECBIO
EN C
EOSN PEACRTAA L
RAS CE OAN TEIE
XRIÓ
RNA
NO EXISTEN PARTES AJUSTABLES POR EL USUARIO EN EL INTERIOR DEL EQUIPO
CAUTION ATTENTION
risk o
dfo
e
n
loec
tt o
rpic
e n
shockdange
nre
d
p’a
esl e
o
cutvrroic
rution
CAUTION ATTENTION
AHVOOTID
S
C
UORNFA
TCAEC,T TEM
NE
P EPR
AAS
T U
TO
RE
U C
EHLEERVE
!E!
N1918
D.A.S. AUDIO S.A. (Valencia) SPAIN
INPUT
SIGNAL SATELLITE OUTPUT
INPUT A INPUT B OUTPUT A OUTPUT B
THRU
HPF
LIMIT SIGNAL ON
PHASE
180º
POWER
115/230V 50/60HZ 800W
T5AL 250V FOR 230V INPUT
T9AL 250V FOR 115V INPUT
SUB LEVEL
MIN 60HzMAX 160Hz
0º
LOW-PASS
CROSSOVER
100Hz

AMPLIFIER
Description
1) INPUT :
1/4” Jack+XLR c
:
1 or S =GND (ground).
2 or T =(+) Non inverted input.
3 or R =(-) Inverted input.
2) LOOP THRU (except SUBs):
XLR-type output signal connector for connecting several
units together and sending them all the same signal.
2) SATELLITE OUTPUT (only SUBs):
A and B, XLR-type output signal connectors for
connecting several units together and sending them all the
same input signal or filtered signal (by using THRU/HPF).
3) LIMIT :
Red LED indicates amplifier saturation. Amplifier limiter
indicator lights.
4) SIGNAL :
Green LED indicates signal presence.
5) ON :
Green LED (blue for action 18A) indicates that the unit is
ON.
6) LEVEL / SUB LEVEL :
Potentiometer for adjusting the unit level.
7) MAIN / MONITOR (only action M12A) / BOOST / FLAT :
Button for switching between two types of frequency
response. Press the button to use the unit without
subwoofer. Please note that the unit will therefore reach its
limits sooner.
8) MIC / LINE :
Button for switching between microphone and line
sensitivities. NEVER PRESS THIS BUTTON WITHOUT
FIRST REDUCING THE LEVEL OF THE UNIT TO AVOID
EXTREMELY HIGH SPL.
ombined socket-type input signal
connector. This is a balanced connector just like the LOOP
THRU connector with the following pin assignments
9) LOGO OFF / ON :
Press the button to illuminate the logo.
10) AC INPUT :
Standard IEC-60320 (only action 18A) or PowerCon NAC3FCA mains
connector (inserted, rotated and locked for ON). Only use this equipment
with an appropriate mains cord.
11) POWER :
Mains power ON/OFF switch.
12) THRU/HPF :
‘SATELLITE OUTPUT’ selector to switch between full range signal or pass
filter with cut-off frequency of 100 Hz.
13) LINE SELECT (only action 18A) :
Mains voltage selector (115V AC or 230V AC). Before operating, verify
the voltage selection.
14) LOW-PASS CROSSOVER :
Button for adjusting the upper cut-off frequency for the subwoofer unit. We
recommend a cut-off frequency of 100 Hz.
15) PHASE :
Switch for inverting the phase of the unit.
16) FUSE (only action 18A) :
Fuse holder. Only use the recommended fuse type and size.
17) PRESET DEEP/LOUD (only action 218A) :
Button for switching between two types of frequency response, DEEP or
LOUD.
18) AC OUTPUT (only action 218A) :
PowerCon NAC3FCB connector for AC loop thru allows up to 6 units when
using a 230V version (see unit’s label)). Only use this equipment with an
appropriate mains cord.
19) Fan (only action 218A).
action M12A, action 12A, action 15A
& action 215A amplifiers
action18A amplifier
action218A amplifier
15
Manual del Usuario / action active / User’s Manual
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE
WARNING: THIS PRODUCT MUST BE GROUNDED
REFER TO INSTRUCTIONS MANUAL FOR CONNECTION
NO USER SERVICEABLE PARTS INSIDE
ATENCIÓN: PARA REDUCIR EL RIESGO DE FUEGO O DESCARGAS ELÉCTRICAS NO
EXPONGA ESTE EQUIPO A LA LLUVIA NI A LA HUMEDAD
ATENCIÓN: ESTE APARATO DEBE CONECTARSE A TIERRA
VEASE MANUAL DE INSTRUCCIONES PARA LA CONEXIÓN
NO EXISTEN PARTES AJUSTABLES POR EL USUARIO EN EL INTERIOR DEL EQUIPO
CAUTION ATTENTION
risk of electric shock
do not open danger d’electrocution ne pas ouvrir
CAUTION ATTENTION
HOT SURFACE,
AVOID CONTACT TEMPERATURE ELEVEE! NE PAS TOUCHER!
N1918
D.A.S. AUDIO S.A. (Valencia) SPAIN
INPUT
SIGNAL SATELLITE OUTPUT
INPUT A INPUT B OUTPUT A OUTPUT B
THRU
HPF
LIMIT SIGNAL ON
PHASE
180º
POWER
115/230V 50/60HZ 800W
T5AL 250V FOR 230V INPUT
T9AL 250V FOR 115V INPUT
SUB LEVEL
MIN 60HzMAX 160Hz
0º
LOW-PASS
CROSSOVER
100Hz
2
1
614 15
12
5
4
3
13
10
16
11
115V 3.6A 50Hz/60Hz
AC INPUT
MAX. 3 UNITS IN PARALLEL
AC OUTPUT
OUTPUT A OUTPUT B
HPF/THRUOFF/ON
SATELLITE X-OVERLOGO
LIMIT
SIGNAL
ON
DEEP/LOUD
PRESET
- +
POLARITY
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
N1918
T25 A L 250V FUSE
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE REPLACE
ONLY WITH THE SAME TYPE
LEVEL
+6-oo
0LOW-PASS
160Hz100Hz
125Hz
action 218A
D.A.S. Audio, s.a. (Valencia)
MADE IN SPAIN
22000001
19
6
34
5
17
15
14
2
1
12
18
16
10
9
230V 1.2A 50Hz/60Hz CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LIMIT
SIGNAL
ON
LEVEL MIC/LINE
+12-oo
0
OFF/ON
LOGO
LOOP THRU
INPUT
N1918
action 12A
BOOST
/ FLAT
22000001
D.A.S. Audio, s.a. (Valencia) MADE IN SPAIN
12
3
4
7
68
5
10 11
9

ON / OFF
A sound system should be switched on
sequentially. Switch on the self-powered units last
in your sound system (switch on the subwoofer
before the mid-high system). Switch on the sound
sources such as CD players or turntables, then the
mixer, then the processors, and finally the self-
powered unit. If you have several units, it is
recommended that you switch them on
sequentially one at a time.
Follow the inverse order when switching off,
turning self-powered units off before any other
element in the sound system.
Disconnect the device by removing the mains
connector from the mains socket. The mains
connector and mains socket must always be freely
accessible and never covered or blocked in any
way. The mains cable can be detached from the
device by disconnecting the standard IEC-60320
connector (only action 18A). Always disconnect the
device by removing the mains connector from the
mains socket before detaching the mains cable at
the standard IEC-60320 connector (only action
18A).
The rest of models use a power cable
equipped with a Neutrik PowerCon NC3FCA
connector. Power can be daisy chained via the
NC3FCB output connector (see details on product
label).
IMPORTANT: Do not disconnect the unit
while in use.
Ensure that the device is disconnected from
the mains by observing that the ON LED is turned
off. Please note that the ON LED can stay on for
several seconds after the mains power has been
disconnected.
Low mains voltage
Therefore the current consumed by a 115V
version is double the 230V version to achieve the
same acoustic power level.
If mains voltage falls below the shutdown
voltage for the unit, it will stop playing. When
acceptable levels are regained, the unit will switch
back on automatically.
Normally it is enough just to let the unit cool
down after you have corrected the problem so that
the system functions properly again.
The action 218A amplifier is equipped with fan
and heatsink to maintain the correct operating
temperature.
Keep grilles clean and dust-free.
Do not block or obstruct in any way the air
entrance or exit while the equipment is in use.
Air circulates from the bottom to the top of the
amplifier.
Overheating
This equipment does not normally overheat
during normal conditions of use. When overheating
occurs, the unit protects itself. You should then
find out why and if necessary contact an
authorised dealer for technical assistance.
Equalisation
The unit does not need extreme settings of
equalisation to produce quality sound. Avoid high
levels of gain on the equalisers. Gain values above
+3 dB on a console’s EQ are not recommended.
Overload indicator
This device has an indicator (LIMIT LED) that
lights when the signal is excessive.
The indicator should not be lit continuously.
This distorts the signal (quickly fatiguing your ears)
and may damage the speakers. Therefore, it is
recommended that you never work with this LED
on; at most it should blink only occasionally.
Pink Noise
Mains 230 Vrms 1/3 Power
1.2A
1.5A
1.2A
1.8A
1.5A
2.7A
action 12A
action M12A
action 15A
action 215A
action 18A
action 218A
Manual del Usuario / action active / User’s Manual
16
Heatsink
Entrance
of air
Exit
of air

17
Manual del Usuario / action active / User’s Manual
PROBLEM
No sound from the unit. The
SIGNAL LED does not light up.
Full power cannot be obtained. The
LIMIT LED never lights up.
Sound is distorted. The LIMIT LED is
not on, or only lights up occasionally.
Sound is distorted and very loud
and LIMIT LED lights up.
Hum or buzz when a mixer is
connected to the unit.
Hum or buzz when using lighting
controls in the same building.
The ON LED does not light up when
the mains connector is connected
and the unit is switched to ON.
CAUSE
1 – The signal source is sending no
signal.
2 – Defective cable.
3 - The amplifier has overheated.
The signal source does not have a
hot enough output.
The mixer or signal source is
distorting.
The system is overloaded and has
reached maximum power.
1.– The console probably has un-
balanced outputs. You may be using
an incorrect un-balanced to
balanced cable.
2.– The mixer and the powered
speaker are not plugged into the
same mains outlet.
3.– The audio signal cable is too
long or too close to an AC cable
1.– The audio signal cable is too
long or too close to the lighting
cable.
2.– On a sound system with three-
phase AC, the lighting equipment
and the UNIT are connected to the
same phase.
1.– Bad or loose AC connection to
the UNIT or the mains outlet.
2 – Faulty AC cable.
3 – Blown Fuse.
4 - The mains voltage is out of
range.
SOLUTION
1 – Check that the mixer or sound
source is sending signal to the UNIT.
2 – Check that the cable from the
sound source to the UNIT is
connected correctly. Replace the
cable if defective.
3 - Allow the unit to cool down for
some minutes and it will function
again. Check the main output level
of the mixer or channel gains since
the unit will have been functioning
with excessive levels.
If using a mixer, use the balanced
output if available. Use a
professional mixer with a hotter
output.
Turn mixer channel gains down.
Check that none of your signal
sources are distorting.
Turn down the mixer's output.
1.– Read the appendix of this
manual to make a correct un-
balanced to balanced cable.
2.– Connect the mixer and the unit
to the same mains outlet.
3.– Use a cable that is as short as
possible and/or move the audio
signal cable away from mains
cables.
1.– Move the audio signal cable
away from lighting cables. Try to find
out at what point the noise is leaking
into the system.
2.– Connect the sound system to a
different phase than the lights. You
may need the help of an electrician.
1.– Check your connections.
2.– Check the cables, connectors
and AC power with a suitable mains
tester.
3.- Replace the blown fuse for
another of the same type and size.
4.- If the multimeter determines that
the mains voltage is out the range,
you may need the assistance of an
electrician to find an appropriate
solution.
TROUBLESHOOTING

SPECIFICATIONS
Model
Power Amplifier
Input Type
Input Impedance
Sensitivity
Frequency Range (-10 dB)
HF Horn Coverage Angles (-6 dB)
Maximum Peak SPL at 1m
Transducers/ Replacement Parts
Enclosure Material
Color/Finish
Connectors
AC Power Requeriments
Dimensions (H x W x D)
Weight
Accessories
action M12A
1000 W peak
500 W continuous
(Class D Bi-amplified)
Balanced Differential Line
Line: 20 kohms
Line: 1.95V (+8dBu)
60 Hz - 20 kHz
80º x 50º
130 dB
LF: 12Mi / GM 12Mi
HF: M-34 / GM M-34
Birch Plywood
Black Paint
INPUT: Female XLR
LOOP THRU: Male XLR
AC INPUT: PowerCon NAC 3 FCA
115V, 2.4A, 50 Hz / 60 Hz
230V, 1.2A, 50 Hz / 60 Hz
42 x 64.5 x 31.6 cm
16.6 x 25.4 x 12.5 in
19 kg (41.8 lb)
TRD-2
TRD-6
action 12A
1000 W peak
500 W continuous
(Class D Bi-amplified)
Balanced Differential Line
Line: 20 kohms
Line: 1.95V (+8dBu)
50 Hz - 20 kHz
80º x 50º
131 dB
LF: 12Mi / GM 12Mi
HF: M-34 / GM M-34
Birch Plywood
Black Paint
INPUT: Female XLR
LOOP THRU: Male XLR
AC INPUT: PowerCon NAC 3 FCA
115V, 2.4A, 50 Hz / 60 Hz
230V, 1.2A, 50 Hz / 60 Hz
65.3 x 37.8 x 32.4 cm
25.7 x 14.9 x 12.8 in
20 kg (44 lb)
ANL-2
TRD-2
TRD-6
action 15A
1000 W peak
500 W continuous
(Class D Bi-amplified)
Balanced Differential Line
Line: 20 kohms
Line: 1.95V (+8dBu)
45 Hz - 20 kHz
80º x 50º
131 dB
LF: 15Mi / GM 15Mi
HF: M-34 / GM M-34
Birch Plywood
Black Paint
INPUT: Female XLR
LOOP THRU: Male XLR
AC INPUT: PowerCon NAC 3 FCA
115V, 3A, 50 Hz / 60 Hz
230V, 1.5A, 50 Hz / 60 Hz
77.4 x 44.6 x 43.64 cm
30.5 x 17.6 x 17.2 in
26 kg (57.2 lb)
ANL-2
TRD-2
TRD-6
Model
Power Amplifier
Input Type
Input Impedance
Sensitivity
Frequency Range (-10 dB)
HF Horn Coverage Angles (-6 dB)
Maximum Peak SPL at 1m
Transducers/ Replacement Parts
Enclosure Material
Color/Finish
Connectors
AC Power Requirements
Dimensions (H x W x D)
Weight
Accessories
action 215A
1000 W peak
500 W continuous
(Class D Bi-amplified)
Balanced Differential Line
Line: 20 kohms
Line: 1.95V (+8dBu)
45 Hz - 20 kHz
80º x 50º
134 dB
LF: 2x 15Mi4 / GM 15Mi4
HF: M-44 / GM M-44
Birch Plywood
Black Paint
INPUT: Female XLR
LOOP THRU: Male XLR
AC INPUT: PowerCon NAC 3 FCA
115V, 3.6A, 50 Hz / 60 Hz
230V, 1.8A, 50 Hz / 60 Hz
115.4 x 44.7 x 47.4 cm
45.5 x 17.6 x 18.7 in
44 kg (88 lb)
ANL-2
action 18A
1500 W peak
750 W continuous
(Class D)
Balanced Differential Line
Line: 20 kohms
Line: 1.95V (+8dBu)
35 Hz - 160 Hz
- - -
133 dB
LF: 18H / GM 18G
Birch Plywood
Black Paint
INPUT: 2x Female XLR
LOOP THRU: 2x Male XLR
AC INPUT: Male IEC
115V, 3A, 50 Hz / 60 Hz
230V, 1.5A, 50 Hz / 60 Hz
62.4 x 54 x 65 cm
24.6 x 21.3 x 25.6 in
36.5 kg (80.3 lb)
TRD-6
action 218A
2500 W peak
1250 W continuous
(Class D)
Balanced Differential Line
Line: 20 kohms
Line: 1.95V (+8dBu)
35 Hz - 160 Hz
- -
139 dB
LF: 2x 18H4 / GM 18G4
Birch Plywood
Black Paint
INPUT: 2x Female XLR
LOOP THRU: 2x Male XLR
AC INPUT: PowerCon NAC 3 FCA
AC OUTPUT: PowerCon NAC 3 FCB
115V, 5.4A, 50 Hz / 60 Hz
230V, 2.7A, 50 Hz / 60 Hz
106.7 x 54 x 67 cm
42 x 21.3 x 26.4 in
63 kg (138.6 lb)
TRD-6
18 Manual del Usuario / action active / User’s Manual
specifications are subject to change without prior warning.
D.A.S. Audio S.A. continuously strives to enhance its products through investigation and development. All

RIGGING
This manual contains needed information for
flying D.A.S. Audio line array systems, description
of the elements and safety precautions. To perform
any operations related to flying the system, read
the present document first, and act on the
warnings and advice given. The goal is to allow the
user to become familiar with the mechanical
elements required to fly the acoustic system, as
well as the safety measures to be taken during
set-up and teardown.
Only experienced installers with adequate
knowledge of the equipment and local safety
regulations should fly speaker boxes. It is the
user's responsibility to ensure that the systems to
be flown (including flying accessories) comply with
state and local regulations.
The working load limits in this manual are the
results of tests by independent laboratories. It is
the user's responsibility to stay within safe limits. It
is the user's responsibility to follow and comply
with safety factors, resistance values, periodical
supervisions and warnings given in this manual.
Product improvement by means of research and
development is on going at D.A.S. Specifications
are subject to change without notice.
To this date, there is no international standard
regarding the flying of acoustic systems. However,
it is common practice to apply 5:1 safety factors
for enclosures and static elements. For slings and
elements exposed to material fatigue due to
friction and load variation the following ratios must
be met; 5:1 for steel cable slings, 4:1 for steel
chain slings and 7:1 polyester slings. Thus, an
element with a breaking load limit of 1000 kg may
be statically loaded with 200 kg (5:1 safety factor)
and dynamically loaded with 142 kg (7:1 safety
factor).
When flying a system, the working load must
be lower than the resistance of each individual
flying point in the enclosure, as well as each box.
Hanging hardware should be regularly inspected
and suspect units replaced if in doubt. This is
important to avoid injury and absolutely no risks
should be taken in this respect. It is highly
recommended that you implement an inspection
and maintenance program on flying elements,
including reports to be filled out by the personnel
that will carry out the inspections. Local
regulations may exist that, in case of accident,
may require you to present evidence of inspection
reports and corrective actions after defects were
found.
Warnings
Absolutely no risks should be taken with
regards to public safety. When flying enclosures
from ceiling support structures, extreme care
should be taken to assure the load bearing
capabilities of the structures so that the installation
is absolutely safe. Do not fly enclosures from
unsafe structures. Consult a certified professional if
needed. All flying accessories that are not supplied
by D.A.S. Audio are the user's responsibility. Use
at your own risk.
Flyable action series models feature 6 internal
steel angles, with 2 mounting threads each, so
that 12 flying points are available (2 on each side,
3 on the top panel and 3 on the bottom panel and
2 on the rear panel). Eyebolt flying points are
factory sealed with M10 screws, which are
replaced with eyebolts on the flying points as
required. Flying with eyebolts is very economical
and safe, and is specially recommended for fixed
installations where the boxes are permanently
fixed.
The illustration shows the internal metal
hardware of an enclosure with eyebolt flying.
Introduction
19
Manual del Usuario / action active / User’s Manual

The Allen-head screws must be removed and
replaced by M10 eyebolts on one side of the
enclosure. Each rigging point has 200 kg (440 lb)
working load limit. Then choose the slings or
chains of required load resistance and length,
bearing in mind that the length difference between
the front and back slings or chains will determine
the vertical orientation. Alternatively, the back
bottom eyebolt points can be used to provide
vertical orientation.
The ANL-2 set is an optional set of three
eyebolts and three carabiners. (Dimensions are in
milimetres).
Flying with eyebolts
Each ANL-2 eyebolt has a rated working load
of 200 kg. (440 lb). Each ANL-2 carabiner has a
working load of 330 kg (726 lb). If using other
hardware, make sure it is rated to handle the
required load.
When using eyebolts it is important to bear in
mind that the rated working load is only true for a
load applied in the plane of the eye, and is
significantly reduced for other angles. The drawing
illustrates the concept. The table shows the
variation of the working load as a function of the
load angle. In the case of the ANL-2 eyebolt, this
means that the 200 kg working load becomes 60
kg at 45 degrees. Do not use eyebolt flying if the
load angle is higher than 45 degrees.
The following illustrations show different views
on eyebolt flying for a single box. The length of the
back cables or chains determines the vertical
angle of the box.
ANL-2
20
100% 65% 30% 25%
0 Degrees
% Working
load
30 Degrees 45 Degrees More than 45
Degrees
Manual del Usuario / action active / User’s Manual