Datalux LMV-XG12 User manual

Datalux Corporation
12.1” Monitor Product
Models LMV-XG12-xxx & LMV-XG12i-xxx
Operation Manual

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 2
Page 2
• Datalux Corporation assumes no responsibility for any errors or omissions t at may be present in
t is document. Datalux Corporation reserves t e rig t to make c anges to t is product.
• Datalux LMV-XG12 and LMV-XG12i are registered trademarks o f Datalux Corporation.
• Copyrig t 2008 Datalux Corporation. All rig ts reserved.
Datalux Corporation
155 Aviation Drive
Winc ester, VA 22602 USA
+1-800-DATALUX
[phone]
ttp://www.datalux.com
TABLE OF CONTENTS
Overview...........................................................................................................................3
Features.............................................................................................................................3
Options and Accessories ....................................................................................................
First Time Operation...........................................................................................................4
Unpack and verify all parts ...............................................................................................
Connect your monitor to a power supply...........................................................................5
Turn your monitor on........................................................................................................5
Hardware Subsystems .........................................................................................................6
Power................................................................................................................................6
USB Port (when USB version selected)..............................................................................6
Serial Version....................................................................................................................6
Mounting.............................................................................................................................6
LMV-XG12 Mounting Options..........................................................................................6
Operation.............................................................................................................................7
Front Panel Controls.........................................................................................................7
Rear of Unit Controls........................................................................................................8
Touchscreen Operation.......................................................................................................9
Touchscreen control ..........................................................................................................9
Outline rawing..................................................................................................................9
Available Modes and Resolutions.....................................................................................10
LMV-XG12 or LMV-XG12i Version...............................................................................10
Service and Support ..........................................................................................................10
Appendix A - Technical Specifications ............................................................................11
LMV-XG12 / LMV-XG12i – 12.1” monitor product........................................................11
Optional AC/DC Power supply........................................................................................11

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 3
Page 3
Overview
T e Datalux LMV-XG12 orLMV-XG12i 12.1” monitor product is specifically engineered for demanding
environments, including embedded equipment and industrial environments, as well as automobile and
public safety. T e end-user as unique control over t e presentation of images in t e monitor and ow it is
used.
Features
T e Datalux LMV-XG12 or LMV-XG12i 12.1” monitor includes t e following ardware features:
 Full RoHS-compliance fo r all components and finis ed assembly. (Conforms to EU Directive
2002/95/EC.)
 Overall dimensions are 12.05 [306] x 9.83 [250] x 1.85 [47].
 12.1” diagonal viewing area [30.7cm].
 Fully metallic die-cast aluminum enclosure.
 Protected LCD module.
 Designed for minimum IP54 rating; IP67 possible wit dead front.
 Locking connector for power connection (5.5mm O.D., 2.5mm power pin, 12mm deep).
 75MM VESA mounting ole pattern compliance.
 Accepts DC power from 8-18VDC wit special accommodation for ve icular voltage (transients, etc.)
 Speaker wit special W.L. Gore membrane to prevent moisture ingress (speaker on USB models).
 One USB-2.0 device connector for non-serial (RS232) versions.
Front of LMV-XG12 or LMV-XG12i

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 4
Page 4
Back of LMV-XG12 or LMV-XG12i
Options and Accessories
Several options and accessories are available for t e LMV-XG12 or LMV-XG12i monitor product:
• Serial version (no USB port available).
• Capacitive or Resistive 5-wire touc screen.
• Dead front to increas e moisture ingress resistance.
Contact Datalux for ot er available options.
First Time Operation
Unpack and verify all parts
T e unit s ould be unpacked carefully and c ecked against t e s ipping information. T e s ipping
container and t e packing material s ould be saved in case t e unit needs to be returned.
T e contents of t e s ipment includes t e following:
• Datalux LMV-XG12 monitor wit touc screen (Datalux Part # LMV-XG12-xxx)
• Datalux LMV-XG12I monitor wit touc screen (Datalux Part # LMV-XG12i-xxx)
• Fused DC wiring arness - Standard (Datalux Part # 333-352)
• Service and Support Manual (Datalux Part # 382-053)
• VGA Cable wit ferrites (Datalux Part # 333-415)
• USB + power integrated cable (M12) (Datalux Part # 333-370)
• Serial + power integrated cabl e (M12) (Datalux Part # 333-373)

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 5
Page 5
Datalux recommends your test of t e unit be done promptly since t e warranty period begins upon
s ipment from Datalux. In t e event t at you encounter problems or if t e unit was damaged in s ipment
or you ave been sent t e wrong configuration, please refer to t e Service and Support manual t at was
sent wit t is unit.
Connect your monitor to a power supply
Eac 12.1” monitor product is supplied wit a wiring arness for t e connecting t e LMV-XG12/LMV-
XG12i to your own power supply. T is is a fused two-wire lead wit .25” quick disconnects. (Ref.
Datalux P/N 333-352).
T e Datalux LMV-XG12/LMV-XG12i requires a regulated 8-18 volt input supply. If using an AC supply,
it is recommended t at you use only a Datalux power supply. T is power supply connects to t e LMV-
XG12/LMV-XG12i t roug a power jack locat ed t roug t e pigtail at t e end of t e 333-370 USB +
power cable (or 333-373, in t e case of a serial cable version).
T ere is an optional AC/DC power supply. T is supply is capable of delivering 12 volts @4.17 amps.
(Ref. Datalux P/N UNI-POWER-12V1).
In eit er case, t e barrel plug is inserted into t e mating jack connector and t e locking ring is screwed
down securely.
Turn your monitor on
W en power is applied, t e Power LED on t e membrane switc illuminates.
- Press t e power switc to activate t e monitor.
Power Switch
Front panel membrane switch

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 6
Page 6
Hardware Subsystems
Power
Input power (nominal 12Volts) is provided at t e Power connector. T e 5.5mm O.D. x 2.5mm I.D. x
12mm lengt connector can be connected to locking type connectors.
USB Port (when USB version selected
T is unit as a built-in USB 2.0 ub wit installed USB Audio and USB Touc screen. One USB 2.0
device connection is accessible from t e back of t e unit for connection to anot er ub, a keyboard,
t umbdrive, etc.
For maximum speed, USB 2.0 operation, connect t e USB device directly to port. If an additional USB
ub is used, make sure t e ub as its own power supply and t at it is USB2.0 compliant.
Some USB devices require more power t an supplied by a single USB port (0.5A, maximum). If so, t ese
devices must be self-powered.
Serial Version
Some older video monitor applications may require a serial version of t e LMV-XG12 or LMV-XG12i
monitor. T is is available t roug Datalux Sales. If t e serial version is ordered, t e USB functionality is
not available.
Mounting
LMV-XG12 Mounting Options
T e LMV-XG12 or LMV-XG12i may be used in
several configurations. First it may be used as a
free-standing monitor on a desktop or ot er work
surfaces. T is may be mounted using Datalux
P/N MKL-SL3. It may also be mounted to stands
SVP and SVP9.
Datalux can also provide any custom mounting
solution required. Contact Datalux Sales for more
information.

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 7
Page 7
For older LMV10xxx product and/or latest
LMV XG12/XG10 product
For LMV XG12/XG10 product only *
*May purc ase square plate of SVP-VESA mount only. Will retro-fit onto any base unit.
Operation
T e Datalux LMV-XG12/LMV-XG12i 12.1” monitors offer some unique configuration options to make
t em well-suited for w atever t eir application. T e front of t e unit, including t e separation of front and
back enclosure is IP54 rated. A configuration may be ordered to provide a dead front in place of t e
standard membran e switc configuration. T is brings t e front of t e unit up to a rating of IP67.
Front Panel Controls
T e standard operation is t roug t e membrane switc .
Membrane switc function label.
NOTE: T e power LED will flas if an input voltage of less t an 8VDC is noted.
NOTE: W en power is applied, t e auto-on feature o f t e LMV-XG12/LMV-XG12i will turn t e unit on if
it was on w en power was removed. T erefo re, if an enclosed unit is on, it will remain on w enever power
is available - if t e power glitc es or turns off, you will not ave to turn t e LMV-XG12/LMV-XG12i on.
Once t e LMV-XG12/LMV-XG12i is turned off, it will remain off until t e power button is pressed again.
O /OFF SW
BACKLIGHT
“I STA T”
O /OFF SW
DECREASE LUMI A CE SW
I CREASE LUMI A CE SW

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 8
Page 8
T e following are indicators of state:
Power Applied, Unit Turned Off (Power LED is Amber).
Power On wit Video Signal
NOTE: LED brig tness will be reduced along wit t e brig tness of t e LCD backlig t.
Rear of Unit Controls
T ese are t e
controls for t e
rear of t e unit,
w en a dead
front is used.
NOTE: T ere
are “ ot keys”
fo r luminance
control t roug
t e rear control
area. T ese
keys are
“MINUS” and
“PLUS”. T ere
is feedback for
t e action of t e
t ese switc es
by LEDs of t e
front panel,
w en present.
T is “ ot key”
fun ction does
NOT pull up t e
OSD window.

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 9
Page 9
Touchscreen Operation
Touchscreen control
If c osen as an option, t e LMV-XG12 or LMV-XG12i, ave a ig quality 5-wire touc screen. T e
monitor as a fully integrated USB touc screen controller built in. T is controller makes use of drivers
contained on t e CD-ROM t at s ipped wit t e monitor. T e drivers are also available at t e Datalux
website.
T e touc screen was fully tested and calibrated befo re being s ipped. T e touc screen drivers allow
renewed calibration in t e field, s ould t at be necessary.
Outline Drawing

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 10
Page 10
Available Modes and Resolutions
LMV-XG12 or LMV-XG12i Version
LMV XG12I SUPPORTED
RESOLUTIONS
MODE RESOLUTION
VERTICAL
REFRESH
RATE (Hz)
VGA 640x480 60
640x480 72
640x480 75
SVGA 800x600 56
800x600 60
800x600 72
800x600 75
XGA 1024x768 60
1024x768 70
1024x768 75
EGA 640x 50 70
DOS 720x400 70
Service and Support
T e Service and Support Manual t at came wit your LMV-XG12 or LMV-XG12i monitor explains ow
to get elp s ould a problem arise wit your Datalux product. An explanation of t e Warranty as well as
Datalux’s Standard Terms and Conditions are also contained in t e Service and Support Manual. If you
cannot find t e manual, it is available from our website at www.datalux.com

Datalux LMV-XG12 & LMV-XG12i - Operation Manual 11
Page 11
Appendix A Technical Specifications
LMV-XG12 / LMV-XG12i – 12.1” monitor product
Agency Compliance (Pending)
- All components and finis ed assembly are RoHS-compliant per EU Directive 2002/95/EC.
Mec anical
- Overall dimensions are 12.05 [306] x 9.83 [250] x 1.85 [47].
- Weig t is 6.2lbs [2.8kg] nominal.
- Fully metallic die-cast aluminum enclosure.
- Front membrane switc wit indicator LEDs for easy control.
- VESA 75mm mount compatible.
- Locking power connector (5.5mm O.D., 2.5mm power pin, 12mm deep).
Environmental
- Sealed glass or touc screen front (fragile LCD is protected) (Min. IP54; IP67 front wit dead front).
- Alternate rear access panel w en dead front panel is desired.
Optical (LCD)
- 12.1" diagonal [30.7cm] monitor area.
- 4:3 aspect ratio.
- LMV-XG12i version is XGA resolution (1024 x 768 pixels).
- LMV-XG12i luminance wit out touc screen (protective AR glass) to be 900cd/m2
- LMV-XG12 version is XGA resolution (1024 x 768 pixels).
- LMV-XG12 luminance wit out touc screen (protective AR glass) to be 350cd/m2
- Touc screen option is resistive or capacitive (superior 5-wire construction only).
Electrical
- DC power input 8-18V (can accept nom. 12V power from ve icle).
- Serial option available for legacy integration (RS-232 protocol).
- Fully capable USB ub included w en USB option is c osen (must connect to ost).
Optional AC/DC Power supply
LMV-XG12 Power Supply Specifications
Input voltage: 100-120 volts or 200-240 volts (IEC320-C14 inlet)
Input frequency: 50 – 60 Hz
Input current: 2.0 Amps
Output voltage: 12Volts DC
Output current available: 4.17 Amps
Locking power connector (5.5mm O.D., 2.5mm power pin, 12mm deep), center positive.
P/N 382-167, Rev. B
Printed 2009-04