Delfast Prime 2018 User manual

QUICK START
GUIDE

LET’S GET STARTED!
Congratulaons on purchasing the Delfast electric bike,
the Guinness World record holder
for longest distance traveled on a single charge!
Before enjoying your new bike, please take a few
minutes to become acquainted with your bike by using
this handy quick start guide and watching the videos.
www.delfastbikes.com

1. A BRIEF OVERVIEW OF YOUR NEW E-BIKE

2. BICYCLE ASSEMBLY
2.1. Remove the bicycle and parts from the shipping package. Be sure to remove all small boxes.
2.2. Put on the wheel and ghten the wheel axle nuts.
Watch the video: hps://youtu.be/Pm2H1VNiOXY
2.3. Loosen the bolts that are holding the fork, then posion and align the fork, then re-ghten the
bolts, being careful not to overghten.
2.4. Aach the pedals.
Watch the video: hps://youtu.be/Y5jVT1p_CyM
2.5. Install the handlebars, accessories, mirrors, and throle/grips, and carefully ghten all hardware.
Watch the video: hps://youtu.be/Ltx5LpvcgjI
How everything should look aer assembly: hps://youtu.be/rPESuHUkIHY
3. CHARGING THE BATTERY
3.1. Before operang you must fully charge the baery!
3.2. The charger is equipped with a charging indicator:
red colour: the baery is currently charging;
green colour: the baery is fully charged.
3.3. It takes about 5 hours to fully charge the bike.
3.4. ONLY charge the baery with the charger
that is included in the delivery or with the oponal
Delfast Supercharger.
3.5. Never leave the bike unaended when charging.
3.6. It is crically important to charge the baery at
least once a month. If you fail to do so, it may cause
a baery damage!

4. SEAT ADJUSTMENT
4.1. Seat adjustment and lt steering adjustment
is just like a regular MTB or street bike.
4.2. Adjust the seat height and lt the handlebars
in the preferred posion. Be careful that you do
not exceed the maximum height safety line that is
indicated on the seat pillar and handlebars.
4.3. If your bike is equipped with a motorcycle
saddle it is already adjusted to the opmum
posion at the factory. Addional saddle
adjustment is not required.
5. INFLATING THE TIRES
Ensure that the res are inated to the correct
operang pressure and that the front and rear
brakes are working correctly:
5.1. The recommended re pressure is indicated on
the sidewall of the re.
5.2. Make sure that when you are pulling on the
brake handles that the brakes are engaged and
holding the calipers to the brake disc.

6. TURNING THE BIKE ON AND OFF
Push the ENGINE START/STOP buon on the
bike or use the supplied remote control.
The remote control has the
following buons:
Search: Your bike
makes a beep sound.
Turn ON / OFF the
motor power.
Unlock: Deacvate the
alarm.
Lock: Acvate the alarm.
7. FUNCTION BUTTONS
LIGHT CONTROL BUTTON is used to
turn the headlamp o and on.
TURN SIGNAL SWITCH is used
to indicate right or le turns
by switching the lever to the
appropriate posion, indicated
by arrows. The corresponding
turn indicator will be acvated
on the front and rear blinkers.
SIGNAL BUTTON or HORN is used to
provide audible signals to other road
users. Note that here may be restricons
on the use of the horn in some instances.
THE THROTTLE GRIP is twisted to add or reduce speed.

8. CHOOSE A DRIVING MODE
We have created three speed limit modes to comply with all the rules in most countries of the world:
32 km/h (20 mph); legal in the USA as a Class 2 throle assisted eBike;
25 km/h; legal in almost all EU countries;
no limits — or o road; used for driving outside of public roads.
Please make sure before using this mode that this user selecon is compliant to your local
regulaons.
Speed modes are selected by a set of switches located on the frame under the seat.
Also note that there is a second switch indicang PAS / throle.
PAS (Pedal Assist System): the motor turns on automacally during the rotaon of the pedals. The
throle control is not acve.
Throle: the engine operaon is controlled only by the throle grip. The throle grip is twisted to add
or reduce speed.

9. DISPLAY AND ACCESS TO INFORMATION
Using the display, you get access to informaon about the state of the bike:
The backlighng of the display is always on, that allows you to read informaon in any light condions.
Seng the funcons:
To select informaon: Press , to select informaon.
Seng the funcon: Press , to go to the funcon sengs page.
The display back lighng is always on in order to allow visability in both day and night use.

10. BATTERY CAPACITY
Volts PercentagesExplanaon
54V 100–96% Fully charged
50V 95–81% High amount of energy is available
45V 80–21% Can be operated in the established mode
43V 1–5% Soon the baery will be completely discharged
42V 0% The baery needs to be charged, or movement
will be possible only with the help of pedals
If you have any quesons,
feel free to contact us:
[e-mail]