DELTA Temp Split Airco 6.7 kW User manual

A B C D
QUICK GUIDE
Split Airco 6.7 kW
Delta-Temp Belgium
Lange Ambachtstraat 13, 9860 Oosterzele
T: [phone]
E : [email protected]
www.delta-temp.be
Delta-Temp Germany
Carl-Still-Straße 19, 45659 Recklinghausen
T: [phone]
E : [email protected]
www.delta-temp.de
1. Inside unit
Place the inside unit in the space you want to climatize.
3. Connect tubes and cables on the inside unit
• Connect the prelled glycoltubes (red > red / blue >
blue).
• Connect the power supply cable between both units.
• Insert the condensation tube.
• Attach the grounding cable.
4. Connect tubes and cables on the outside unit
• Connect the prelled glycoltubes (red> red / blue >
blue).
• Connect the power supply cable between both units.
• Insert the condensation tube.
• Attach the grounding cable.
2. Outside unit
Put the outside unit in open air, at max. 20m distance
from the inside unit.
5. Insert power plug
A. Green light on the upper left: the airco is connected.
B. Choose between the dierent working modes: (0) O / (I) Cooling / (II) Ventilation
C. Set the fan speed (Min - Med - Max)
D. Choose the desired temperature.
A B C D
QUICK GUIDE
Airco 6.7 kW
Delta-Temp Belgium
Lange Ambachtstraat 13, 9860 Oosterzele
T: [phone]
E : [email protected]
www.delta-temp.be
Delta-Temp Germany
Carl-Still-Straße 19, 45659 Recklinghausen
T: [phone]
E : [email protected]
www.delta-temp.de
1. Inside unit
Place the inside unit in the space you want to climatize.
3. Connect tubes and cables on the inside unit
• Connect the prelled glycoltubes (red > red / blue >
blue).
• Connect the power supply cable between both units.
• Insert the condensation tube.
• Attach the grounding cable.
4. Connect tubes and cables on the outside unit
• Connect the prelled glycoltubes (red> red / blue >
blue).
• Connect the power supply cable between both units.
• Insert the condensation tube.
• Attach the grounding cable.
2. Outside unit
Put the outside unit in open air, at max. 20m distance
from the inside unit.
5. Insert power plug
A. Green light on the upper left: the airco is connected.
B. Choose between the dierent working modes: (0) O / (I) Cooling / (II) Ventilation
C. Set the fan speed (Min - Med - Max)
D. Choose the desired temperature.

TROUBLESHOOTING GUIDE
Split Airco 6.7 kW
Delta-Temp Belgium
Lange Ambachtstraat 13, 9860 Oosterzele
T: [phone]
E : [email protected]
www.delta-temp.be
Delta-Temp Germany
Carl-Still-Straße 19, 45659 Recklinghausen
T: [phone]
E : [email protected]
www.delta-temp.de
Important Information:
The mobile split air conditioner AC 6.7 is a robust and durable air conditioner. Despite this,
there may be malfunctions due to transportation. Here you can nd out how an error can be
rectied quickly and easily.
1. Check whether the LED light on the control panel
glows green. Red light means error.
LED lights up RED
3. To reset the machine, unplug the power cord for 60
seconds and then plug it back in.
5. Check the water connections and condensate hose for
tightness and correct seating. Red to red and blue to
blue.
6. Check the water glycol tank. This tank must always be
full.
2. Check the power supply.
4. Checkthefuse(Qualiedpersonnelonly.Only
carryoutwhenthereisnocurrent.Non-qualied
personnel please contact Delta-Temp). To do this,
remove the cover on the back of the device with 8
screws.
+„HIPS“ +„HIPS“

TROUBLESHOOTING GUIDE
Split Airco 6.7 kW
Delta-Temp Belgium
Lange Ambachtstraat 13, 9860 Oosterzele
T: [phone]
E : [email protected]
www.delta-temp.be
Delta-Temp Germany
Carl-Still-Straße 19, 45659 Recklinghausen
T: [phone]
E : [email protected]
www.delta-temp.de
Error message Possible problem Possible solution
+“Pump“ Internal pump alarm is active. See point 7. , 10.
+„LOPS“. Dirty internal fan or leak in the refrigerant circuit. See point 8. , 10.
+„HIPS“
Water connections incorrectly connected. See point 5. , 9. , 10.
Level in the water-glycol tank is too low. See point 6. , 9. , 10.
Fan not working properly. Contact Delta Temp
Outside temperature is too high (above 35 - 40°C). -
Glycol water pump not working properly. Contact Delta Temp
7. Error message +“Pump“. Unplug the air conditioner
and check if the pump can move freely. Insert a
longatheadscrewdriverintotheholeontheleft
side of the unit and attempt to rotate the pump. If
the pump does not rotate, there is a defect: contact
Delta Temp.
+“Pump“
9. Error message +“HIPS“. After doing these checks
andxingtheproblem,pressthe„Reset“button.
+“HIPS“
8. Error message +“LOPS“. Clean the internal fan or
eliminatetheleakintherefrigerantcircuit(qualied
personnelonly.Non-qualiedpersonnelplease
contact Delta-Temp).
+„LOPS“
10. Unplug the power cord and plug it back in to reset
all alarms.