Displaymodule Dm-adtau-005 User manual

USER MANUAL FOR

DM-ADTAU-005 AND

DM-ADTAU-006

Arduino Quick start guide

Contents

Revision history

Preparations

Install the Library

Installation Steps

The Usage of DM-ADTAU-006

Arduino Quick start guide

1 Revision history

Date

Version

Changes

2015-07-28

1.0

First release

2 Preparations

This manual assume you have the following:

●Arduino UNO, DM-ADTAU-001, DM-ADTAU-005

●Latest Arduino IDE installed from http://arduino.cc/en/Main/Software

Arduino Quick start guide

3 Install the Library

●Download the DMTftLibrary and unzip DmDrawBmp and DmTftLibrary to your

Arduino library folder.

(On Windows it's usually C:\Users\<your name>\Documents\Arduino\libraries)

●Restart Arduino IDE, now you can find examples in the

File->Examples->DmTftLibrary

 
 
Arduino Quick start guide 
4 Installation Steps 
●Attach the suitable display panel to the DM-ADTAU-005 according the connector 
number.  There are 9 kinds of display panel: DM-TFT18-308 (for J1 connector); 
DM-TFT18-309 and DM-TFT18-310 (for J1 connector); DM-TFT24-311 and 
DM-TFT24-312 (for J3 connector); DM-TFT24-313 and DM-TFT24-314 (for J4 
connector); DM-TFT24-315 and DM-TFT24-316 (for J5 connector) 

 
●Attach the DM-ADTAU-005 board to another adapter shield DM-ADTAU-001. 
 
●Attach the DM-ADTAU-001 to the Arduino UNO and connect Arduino UNO to PC 
by usb cable. If everything is ok, the backlight is turn on default. 
 
●Open a examples from Arduino IDE.Files → Examples → DmTftLibrary → 
DM-TFT24-312 → Test_all_features 
 
Copyright © 2015                                                        5 / 7                                                www.displaymodule.com 