ACU-RITE 06006 User manual

Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Display for 5-in-1 Weather Sensor
model 06006
Package Contents
1. Display with Tabletop Stand
2. Power Adapter
3. USB Cable
4. Instruction Manual
This product requires an AcuRite 5-in-1 Weather Sensor
(sold separately) to be operational.

2
>]Ylmj]k:]f]Úlk
Display
2
13 4 4
41
40
39
35
37
38
36
32
33
28
29
34
5
7
6
8
10
9
12
11
13
14
18
20
19
15
17
16
26 27 26 23 25 24 23 22
30
31
21

3
1. Current Wind Direction
2. Touch Activated Backlight
Momentary during battery power,
always on/off for power adapter.
3. Current Wind Speed
4. Previous 2 Wind Directions
5. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
6. Outdoor Temperature Alarm On
Indicator
7. Current Outdoor Humidity
Arrow icon indicates direction
humidity is trending.
8. Outdoor Humidity Alarm On
Indicator
9. Current Rainfall
Accumulates data during rainfall.
10. Rainfall Alarm On Indicator
11. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls
data from your 5-in-1 sensor to
generate your personal forecast.
12. All-Time Rainfall
13. Current Month Total Rainfall
14. Date
15. Clock
16. Display Low Battery Indicator
17. Selectable Category
18. Record High
Shown for current category selected
on the display (#17).
19. Record Low
Shown for current category selected
on the display (#17).
20. Weather Ticker™
21. Button
Press for all-time low and date
recorded for current category
selected on display (#17). Press twice
for all-time high and date recorded.
22. Button
Activates current Weather Ticker
message during ticker customization
mode.
23. V & W Buttons
Press to select category (#17)
adjust settings.
24. Button
Press to manually advance through
Weather Ticker messages.
25. Button
For setup preferences.
26. Button
Activate alarm; press and hold to
adjust alarm values.
27. Button
Deactivates current Weather Ticker
message during ticker customization
mode.
28. Indicates Deactivated Weather
Ticker Message
During ticker customization mode.
29. Indicates Active Weather Ticker
Message
During ticker customization mode.
30. Programmable Alarm Settings
31. Alarm On/Off Indicator
For Selectable Category (#17).
32. Sensor Low Battery Indicator
33. 5-in-1 Sensor Signal Strength
34. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
35. Weather Select Button
Press to change the Weather Select
category data being displayed.
36. Current Barometric Pressure
Arrow icon indicates direction
pressure is trending.
37. Weather Select (top to bottom)
Heat index, dew point, wind chill,
indoor temperature / humidity,
rainfall rate (in/mm per hour).
38. Storm Alert Alarm On Indicator
39. Average Wind Speed
of all speeds from past 2 minutes.
40. Wind Speed Alarm On Indicator
41. Peak Wind Speed
Highest speed from past 60 minutes.

4
Back of Display 123 4
BACK OF DISPLAY
1. Plug-in for Power Adapter
2. Plug-in for USB Cable
3. Integrated Hang Hole
For easy wall mounting.
4. DEVICE ID
12 digit unique ID required for
online connectivity functions.
5. Backup Battery Compartment
6. A-B-C Switch
ID code that must match 5-in-1
l^glhkl:&;&<lpbm\amh^glnk^
units synchronize.
7. CLEAR TODAY
Clears data recorded since
12:00am.
8. CLEAR ALL
Clears all recorded data without
having to reset time and date.
9. RESET
Full reset to factory defaults.
10. Power Adapter
11. USB Cable for PC Connection
12. Battery Compartment Cover
(not shown)
10
11
6
7
8
9
5

5
SETUP
Display Setup
Set the A-B-C Switch
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However, you
must select the same letter choices
for both the 5-in-1 Sensor and the
display in order for the units to
synchronize.
Plug Power Adapter into
Electric Outlet
Write Down the DEVICE ID
12 digit unique ID needed for
online connectivity functions.
Install or Replace Backup
Batteries (optional)
Insert 6 x AA alkaline batteries into
the battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
2
3
4
1
4Install Backup
Batteries
6 AA Batteries
(optional)
3Write Down
DEVICE ID
12 digit number
2Plug in Power
Adapter
A B C
1A-B-C Switch
set to match
sensor
IMPORTANT: Batteries are a backup
power source to preserve records
in the event of a power outage.
Power adapter is the recommended
primary power source to enjoy the full
functionality of this product.
24 C8 6E

6
Set the Time & Date
The clock and calendar are utilized to time stamp history records and other
data, so it is important to set the time and date soon after you power on the
display.
Set the Time
1. Press the “ V “ or “ W “ buttons until
“SET CLOCK?” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the clock.
3. Press the “
V “ or “ W “ buttons to adjust the
hour. Note the “AM” and “PM” indicators.
-' Ik^llma^[nmmhgmh\hgÛkfahnk
selection.
5. Press the “
V “ or “ W “ buttons to adjust
minutes.
/' Ik^llma^[nmmhgmh\hgÛkffbgnm^
selection.
The clock is now set.
Set the Date
1. Press the “ V “ or “ W “ buttons until
“SET DATE?” is displayed on the Selectable
Category part of the display.
2. Press the “ ” button to set the date.
3. Press the “
V “ or “ W “ buttons to adjust the
month.
-' Ik^llma^[nmmhgmh\hgÛkffhgma
selection.
5. Press the “
V “ or “ W “ buttons to adjust the
day.
/' Ik^llma^[nmmhgmh\hgÛkf]Zr
selection.
7. Press the “
V “ or “ W “ buttons to adjust the
year.
1' Ik^llma^[nmmhgmh\hgÛkfr^Zk
selection.
The date is now set.
Note: The “ ” stays in
Selectable Categories,
even after setup.

7
Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the “
V “ or “ W “ buttons until “SET UNITS?” is
displayed on the Selectable Category part of the display.
2. Press the “ ” button to set the unit preference.
3. Press the “
V “ or “ W “ buttons to select “STAND” for
standard or “METRIC” for metric units.
-'Ik^llma^[nmmhgmh\hgÛkfrhnkl^e^\mbhg'
5. Next, you will see “WIND MPH”. Press the “
V “ or
“
W “ buttons to select MPH, KPH, or KNOTS for wind
speed units.
/'Ik^llma^[nmmhgmh\hgÛkfrhnkl^e^\mbhg'
Units are now set.
Set Language
To select between English (default) or French for the display language:
1. Press the “
V “ or “ W “ buttons until “SET LANG?” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the language preference.
3. Press the “
V “ or “ W “ buttons to select the desired language.
-'Ik^llma^[nmmhgmh\hgÛkfrhnkl^e^\mbhg'
Language is now set.
Note: Display reverts to English language when display runs out of power or is reset.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and the sensor are critical to the accuracy and
performance of this product.
Display Placement
Place the display in a dry area free of dirt and dust. To ensure
accurate temperature measurement, place out of direct sunlight and
away from heat sources or vents. Display stands upright for tabletop
use or is wall-mountable.
Important Placement Guidelines
Display and sensor must be within 330 feet (100 m) of each other.
MAXIMIZE WIRELESS RANGE
Place units away from large metallic items, thick walls, metal surfaces, or other
objects that may limit wireless communication.
PREVENT WIRELESS INTERFERENCE
Place both units at least 3 feet (.9 m) away from electronic devices (TV, computer,
microwave, radio, etc.).

8
PC Connect
PC Connect works with PCs to provide access to your Weather Center data in the
following ways:
•Data File: The display logs (or stores) data so that you can download it to a
<LO!\hffZl^iZkZm^]oZen^l"]ZmZÛe^hgrhnkI<'
•Web Browser or Smartphone3Fhgbmhkl^glhk]ZmZk^fhm^ernlbg`:\nKbm^l
free AcuRite online software, or from a mobile device using the free AcuRite
app, available from the Apple App Store or Google Play Store.
•
Weather Underground: This weather station is compatible for streaming data
to the Weather Underground Personal Weather Station Network.
Download the Software
The PC Connect software is available online as a free download. A manual (PDF) is
included with the software download.
Before setting up the PC Connect software, verify that the display
is ON with the power adapter plugged in. Next,
connect the mini-USB (small end of the cable) into the
USB port on the display, located inside the battery
compartment.
e
display
Download PC Connect software to your computer by visiting:
acurite
Hi^gma^Ûe^maZmpZl]hpgehZ]^]bglm^i*Zg]_heehpma^hg&l\k^^g
instructions to install the software.
2
:_m^kI<<hgg^\mblbglmZee^]hgma^\hfinm^k%ma^bgbmbZe\hgÛ`nkZmbhgpbee
begin automatically. Select where to save weather data downloaded from the
display. By default, this will create a folder on the computer.
When prompted by the software to plug in the display, connect the
USB (larger end of the cable) into a USB port on the computer.
PC Connect is installed and ready for use.
Follow the instructions within the PC Connect app
to complete setup and begin using the software.
1
3
4
USB Mode
Mhl^mniI<<hgg^\m%rhnfnlmÛklml^e^\mfh]^,hgrhnk]blieZrmh`ZbgZ\\^llmhZee
functionality. Modes 1, 2 and 4 are not used for the PC Connect software.
1. Press the “
V “ or “ W “ buttons until “SET USB MODE?” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the mode preference.
3. Press the “
V “ or “ W “ buttons to select USB mode #3.
4. Press the “ [nmmhgmh\hgÛkfrhnkl^e^\mbhg'I<<hgg^\mNL;Fh]^
is now set.
(PC)

9
Using the Professional Weather Center
Learning Mode
Self-Calibrating Forecasting use a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the unit is
ready for superior weather prediction.
Weather Forecast
:\nKbm^liZm^gm^]L^e_&<Zeb[kZmbg`?hk^\Zlmbg`ikhob]^lrhnki^klhgZe_hk^\Zlm
of weather conditions for the next 12 to 24 hours by collecting data from
the sensor in your backyard. It generates a forecast with pinpoint accuracy -
personalized for your exact location.
RAIN
LIKELY
SNOW
LIKELY
CHANCE OF MIXED
RAIN & SNOWCLOUDY
PARTLY
CLOUDY
STORM
LIKELY
OPERATION
Weather Select
Features weather data groups
shown at right. To change
“Weather Select” category,
press the selection arrow
button just to the left of the
weather select display area.
Rainfall Event
The rainfall feature tracks rain accumulation over all-time, the current month,
and current rainfall event. Current event clears when no rain registers for
8 hours OR no rain registers for 1 hour and pressure rises by .03inhg or more.
= Heat Index
= Dew Point
= Wind Chill
= Indoor Conditions
= Rainfall Rate (in./hour)

10
Additional Messages Include:
NEW HIGH TEMPERATURE RECORD
NEW LOW TEMPERATURE RECORD
NEW WIND SPEED RECORD TODAY
CURRENT RAINFALL RATE
CURRENT RAIN EVENT STARTED
NO RAIN RECORDED SINCE ____
WEATHER ALARM MESSAGES
SENSOR BATTERIES LOW
SENSOR SIGNAL LOST
Barometric Pressure
Subtle variations in barometric pressure greatly affect the weather. This
weather center displays the current pressure with an arrow icon to indicate the
direction the pressure is trending (FALLING, STEADY, or RISING).
Weather Ticker™
The Weather Ticker automatically streams your real-time weather information
and alerts as scrolling text in the lower part of the display screen.
You can manually cycle through all the available messages by pressing “ ”
button.
Default WEATHER TICKER messages are pre-loaded as follows:
FORECAST 12 to 24 hour future weather forecast
MOON PHASE Current moon phase
INDOOR COMFORT Dry, OK or humid comfort level
IT FEELS LIKE __ OUTSIDE Calculates what temperature it feels like outdoors
(based on temperature, humidity and wind speed)
OUTDOOR TEMP THIS
WEEK HIGH Highest temperature recorded this calendar week
OUTDOOR TEMP THIS
WEEK LOW Lowest temperature recorded this calendar week
OUTDOOR TEMP THIS
MONTH HIGH Highest temperature recorded this calendar month
OUTDOOR TEMP THIS
MONTH LOW Lowest temperature recorded this calendar month

11
Adjust the Weather Ticker Speed
1. Press the “ V “ or “ W “ buttons until “TICKER SPEED” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the speed preference.
3. Press the “
V “ or “ W “ buttons to select a speed: SLOW, NORMAL, or FAST.
-' Ik^llma^[nmmhgmh\hgÛkfrhnkl^e^\mbhg'
Weather Ticker speed is now set.
Customize Weather Ticker Messages
Customize which messages you want to scroll across the WEATHER TICKER:
1. Press the “ ” button to manually cycle through each message available.
2. During the MANUAL REVIEW: PRESS the “ ” button to activate the
current scrolling message. The corresponding “ ” appears on screen
to the left of the message to indicate the message is now active in the ticker
cycle. PRESS the “ ” button to deactivate the current scrolling message.
The corresponding “ ” appears on screen to the left of the message to
indicate the message is now deactivated from the ticker cycle.
Please note: Messages can only be added and removed to the ticker cycle
during manual review. The “ ” and “ ” buttons do not add or remove
messages during the automatic cycle.
Remove
message
from cycle
Message
activated
Message
deactivated
Manual cycle
through
messages
Add
message
to cycle

12
Programmable Weather Alarms
Each Selectable Weather Category features an alarm option. When an alarm
lhng]l%ma^]blieZr^fbmlZn]b[e^[^^ibg`Zg]ÜZla^lma^Z__^\m^]\Zm^`hkr%bml
alarm settings, and any other relevant data.
Some alarms can be customized to alert you when your programmed value is
reached. Alarms include:
OUTDOOR HUMIDITY LOW HIGH
OUTDOOR TEMP LOW HIGH
STORM ALARM HIGH
INDOOR HUMIDITY LOW HIGH
INDOOR TEMP LOW HIGH
WIND CHILL LOW
DEW POINT LOW HIGH
HEAT INDEX HIGH
RAIN HIGH
WIND SPEED HIGH
The rain alarm does not require a preset numerical value, but instead sounds
as soon as rain is recorded. Similarly, the storm alarm sounds when a large
atmospheric pressure drop occurs, which usually indicates an oncoming storm.
Note: The storm alarm is NOT intended to be a safety device or warning system.
Set a Weather Alarm
1. Choose the weather category for which you wish to set an alarm by
pressing the “ V “ or “ W “ buttons until the category is displayed on the
Selectable Category part of the display.
2. To program a value (only applies to alarms that require a value), press
AND HOLD the “ ” button underneath the alarm you wish to set until the
“ bg]b\ZmhkZii^ZklZg]ma^ZeZkfl^mmbg`ÜZla^l'
3. Adjust the alarm value by pressing the “
V “ or “ W “ buttons.
4. Press the “ [nmmhgmh\hgÛkfZoZen^'
5. Next, press the “ ” button to activate the alarm (the Xindicator
disappears when alarm is activated).
Alarm is now programmed and turned on.

13
= Alarm On
= Alarm Off
= Adjust Mode
= Low Value
= High Value
Press to activate or
deactivate an alarm.
Press and hold to set
or adjust an alarm
value.
ICON DEFINITIONS
BUTTON FUNCTIONS
Silence a Sounding Alarm
The alarm sounds initially for a few minutes,
then silences itself. The alarm then sounds
every few minutes afterwards until one of the
following happens:
1. “SNOOZE” - Press any button. Alarm
silences, but sounds again if the alarm condition reoccurs.
2. Turn alarm “OFF” - Deactivates alarm.

14
Problem Possible Solution
No outdoor sensor
reception
no bars
•Relocate the display and/or the 5-in-1 sensor.
The units must be within 330 ft (100 m) of each other.
•Make sure both units are placed at least 3 feet
(.9 m) away from electronics that may interfere with
the wireless communication (such as TVs, microwaves,
computers, etc).
•Use standard alkaline batteries (or lithium batteries
in sensor when temperature is below -4ºF/-20ºC). Do
not use heavy duty or rechargeable batteries. NOTE:
It may take a few minutes for display and sensor to
synchronize after batteries are replaced.
•Synchronize the units:
1. Bring both the sensor and display indoors and
remove power adapter/batteries from each.
2. Reinstall batteries in outdoor sensor.
3. Reinstall power adapter/batteries in display.
4. Let the units sit within a couple feet of each other
for a few minutes to gain a strong connection.
Outdoor
temperature
akÛYk`af_gj
showing dashes
Flashing of the outdoor temperature may be an
indication of wireless interference.
•Make sure the A-B-C switch in the battery
compartments of both the display and sensor are
switched to the same letter. You may choose A, B or
C; but both units must match to sync up. Sometimes
changing to a different channel can help.
Weather Ticker
Hard to Read • Slow down the speed of the ticker (see page 11).
Inaccurate forecast
•Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.
•Has Learning Mode icon disappeared from the
display? Learning Mode must complete before
forecast and pressure will be accurate.
•Allow unit to run continuously for 33 days. Battery
removal or resetting the display will restart Learning
Mode. After 14 days, forecast should be fairly
accurate, however Learning Mode calibrates for a
total of 33 days.
Troubleshooting

15
Problem Possible Solution
Inaccurate
temperature or
humidity
•Make sure both the display and 5-in-1 sensor are
placed away from any heat sources or vents
(see page 7).
•Make sure both units are positioned away from
moisture sources (see page 7).
•Make sure 5-in-1 sensor is mounted at least 5 ft off of
the ground.
• Calibrate indoor and outdoor temperature and
humidity (see page 17).
No rainfall
• Check to ensure the rain gauge stabilizer (plastic tab)
has been removed from the bottom of the sensor.
• Clear debris, such as leaves, out of the rain collector
funnel and debris screen.
Inaccurate wind
readings
•What is wind reading being compared to? Pro
weather stations are typically mounted at 30 ft high
or more. Make sure to compare data using a sensor
positioned at the same mounting height.
<a^\deh\Zmbhgh_ma^l^glhk'>glnk^bmlfhngm^]Z
minimum of 5 ft in the air with no obstructions around
it (within several feet).
• Ensure wind cups are spinning freely. If they hesitate
or stop try lubricating with graphite powder or spray
lubricant.
USB connectivity
not working
• Verify display is in USB mode 3 (see page 8).
• Unplug USB from display to computer for 20 seconds,
and then plug back in.
•Check that the batteries are installed correctly.
Batteries may need to be replaced.
•Reset the display by pressing the reset button, located
on the back of the display. Date and time will need to
be entered after a reset.
Display screen
not working
• Check that the power adapter is plugged into the
display and an electrical outlet.
•Reset the display by pressing the RESET button,
located on the back of the display. Date and time will
need to be entered after a reset.
Troubleshooting

16
Problem Possible Solution
Cannot access data
online or on the
AcuRite mobile app
• Verify under Status that data was received from the
indoor display. The timestamp should update every
18-36 seconds.
•
Verify that you created an account.
:\nKbm^Zii%Zg]maZmrhnbginmma^]blieZrl=>OB<>
ID as a part of the account setup.
• Verify the PC that the display is connected to is
always powered ON.
• Verify the PC that the display is connected to is
always connected to the internet.
O^kb_rmaZmma^]blieZrl=>OB<>B=bl^gm^k^]
correctly in the PC Connect software on your PC.
• Verify that “Sharing” is enabled in the PC Connect
software on your PC.
No data received from
indoor display
• Verify that the USB cable is securely connected to the
display AND to the PC.
• Verify the display is powered ON.
• Restart the PC Connect software.
• Unplug the USB cable from the PC for 1 minute,
then plug the cable back in again.
• USB port may be malfunctioning, try using a different
USB port.
Troubleshooting

17
Care & Maintenance
Display Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away
from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.
Calibration
Calibrate Temperature & Humidity
The indoor / outdoor temperature and humidity readings can be calibrated on the
display to improve accuracy. Calibration improves accuracy when 5-in-1 sensor
placement or environmental factors impact your data accuracy.
1. Choose the weather category you wish to calibrate by pressing the “
V “ or “ W “
buttons until the category is displayed on the Selectable Category part of the
display.
2. Press AND HOLD the “
V “, “ W “ and “ ” buttons all at the same time for
10-15 seconds.
• The display beeps, and all display data is hidden except for the value being
calibrated.
• “ ” (calibrate) and arrows appear next to the value being calibrated.
3. Press the “
V “ or “ W “ buttons to calibrate the data value higher or lower from the
actual reading.
-' Ik^llma^[nmmhgmh\hgÛkfma^\Zeb[kZmbhgZ]cnlmf^gm'
Note: The “ ” icon remains illuminated next to calibrated
values.

18
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could
void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Kh][aÚ[Ylagfk
<AKHD9QK:MADL%AF
TEMPERATURE SENSOR RANGE
32ºF to 122ºF; 0ºC to 50ºC
<AKHD9QK:MADL%AF
HUMIDITY SENSOR RANGE
16% to 98%
WIND SPEED 0 to 99 mph; 0 to 159 kph
WIND DIRECTION INDICATORS 16 points
RAINFALL 0.01 inches (0.25 mm) and up
WIRELESS RANGE 330ft / 100m depending on home construction materials
OPERATING FREQUENCY 433 MHz
POWER 5V, 250mA adapter
6 x AA alkaline batteries (optional)
DATA REPORTING
Wind Speed: 18 second updates; Direction: 30 seconds
Outdoor temperature & humidity: 36 second updates
Indoor temperature & humidity: 60 second updates
PC Connect CSV Data Logging: 12 minute intervals
PC Connect to AcuRite Software/App: 18 seconds
DISPLAY MEMORY 512 kilobytes (not expandable)
PC CONNECT SYSTEM
REQUIREMENTS
High speed internet is required for some advanced features of
PC Connect, such as Weather Underground Rapid Fire Updates.
Windows 10 / 8.1 / 8 / 7; 1 GHz or faster processor;
1 GB (32-bit) or 2 GB (64-bit) of RAM; available USB 2.0 port
Mac OSX 10.9 (Mavericks) or higher

Instruction Manual
5-in-1 PRO Weather Sensor
model 06014RM
Package Contents
1. 5-in-1 PRO Weather Sensor
2. Mounting Hardware
3. Sensor Mounting Bracket
4. Instruction Manual

>]Ylmj]k:]f]Úlk
7
2
1
9
8
10
5
6
11
4
3
5-IN-1 SENSOR
1. Rainfall Collector Funnel
2. Solar Cell Panels
Converts sunlight into power to run
internal aspirating fan.
Internal Aspirating Fan
(not shown)
Draws ambient air into
sensor to reduce solar radiation
heating, resulting in more accurate
temperature measurement.
3. A-B-C Switch
B=\h]^maZmfnlmfZm\a]blieZrl
A-B-C switch to ensure units
synchronize.
4. Battery Compartment
5. Temperature & Humidity Sensors
(internal)
6. Mounting Point
7. Wind Speed Anemometer
8. Wind Direction Vane
9. Mounting Bracket
10. Mounting Hardware
includes anchors & screws.
Qty Diameter Length
5 #4 3/4”
1 #4 1/2”
1 #6 1/2”
11. Debris Filter
Pre-installed to prevent debris from
entering the rain gauge.