Dritz MY DOUBLE DELUXE User manual

You finally purchased a dressform. Congratulations! Now what? You chose one from a selection
of forms that have different measurements and features. See our tutorial How to Choose a
Dressform for more information on the differences in dressforms. Now you must adjust the dress-
form size to match your own measurements and start to use it. In this tutorial we will explain how
the adjustment dials work and how to get the most out of your dressform.
Product Tutorial
How to Use a Dressform
Be Crafty.
© Prym Consumer USA
Set up your form according to the instructions. Make sure the
assembled stand is securely placed on the floor with legs or
casters firmly in position.
SET UP YOUR DRESSFORM
1.
Insert leg.
Lock legs or wheels
into place.
To mount the dressform onto the stand, slide the inner
body pole onto the pole attached to the stand. It will rest
against the height adjuster (A). This is the wing nut
assembly located on the pole attached to the stand.
To adjust the dressform height, loosen the height adjust-
er wing nut by turning it to the left. Raise the height
adjuster and the dressform until shoulder height matches
your own shoulder height. (See the measurement chart
located in our tutorial, How to Choose a Dressform.)
Tighten the wing nut to keep the dressform at the proper
height.
PLACE FORM ON STAND POLE
AND ADJUST THE HEIGHT
2.
TIP
Have a friend help you with
shoulder height adjustment.
The Swivel Control (B) is the wing nut assembly located
on the bottom of the inner body pole. It can remain loose so the form swivels as needed. Tighten to
keep the form stationary.
B
C
BACK WAIST
LENGTH
ADJUSTER
SWIVEL CONTROL
HEIGHT ADJUSTER
Tighten or loosen
to control spin.
AAdjust to shoulder
height or raise and
lower to adjust form
to a dierent
working height.

Product Tutorial
How to Use a Dressform (continued)
Be Crafty.
© Prym Consumer USA
MY DOUBLE DELUXE
TIP
Be sure to tighten the Swivel Control on all
forms when height is extended to the maximum.
This stabilizes the dressform and minimizes wobble.
The My Double Deluxe
is designed with addi-
tional features. It has a
second inner body
pole attached to the
form for pants fitting.
This pole is offset so it
fits inside a pant leg
and also offers addi-
tional height. The
metal inner body pole
looks and operates like
the drawing in Page 1.
The off-set pole
appears the same, but
it is black plastic and it
does not adjust the
back waist length.
Instead, the top knob
simply releases the pole from the form for added height. Turn the knob counterclockwise to lower
it. When it is the desired length, tighten by turning it clockwise. Knobs A and D offer added height
when used in conjunction. Both poles have a swivel control (B).
For all models the maximum height is about 63” at the shoulder. You must leave at least 1” of the
stand pole visible above the height adjuster to attach the form. This leaves enough room to tighten
the swivel control. The off-set pole option on the My Double Deluxe form will extend the maximum
shoulder height to about 70”.
C
My Double Deluxe
off-set pole
B
DOFF-SET
POLE
RELEASE
SWIVEL
CONTROL
HEIGHT
ADJUSTER
Tighten or loosen
to control spin when using
oset pole.
Loosen this and pull down
the pole. Join to base pole
for pant tting. Tighten when
measurement is correct.
Attached to pole on stand. Adjust to
personal height or raise and lower
to adjust form to a dierent working height.
B
BACK WAIST
LENGTH
ADJUSTER
SWIVEL CONTROL
Tighten or loosen
to control spin when
using center pole.
A

Product Tutorial
How to Use a Dressform (continued)
Be Crafty.
© Prym Consumer USA
The Back Waist Length Adjuster (C) is also on the pole attached to the form. To adjust: turn the
knob to the left to loosen. Then, reaching outside of the form, gently pull down the hip section.
Measure the back waist length and continue to adjust the hips until back waist length matches
your personal measurement. Tighten the knob.
3. ADJUST THE BACK WAIST LENGTH
B
C
BACK WAIST
LENGTH
ADJUSTER
SWIVEL CONTROL
HEIGHT ADJUSTER
Loosen and pull down
on hip section of form.
Measure. Tighten when
measurement is correct.
A

FYI
Dials and wheels are marked in both
centimeters and inches. Auto-set dials also
have the form size and dial location marked.
cm = centimeters / ins = inches
AB: The first letter (A) = Size A, B, C, or D. The second
letter is location. B = Bust, W = Waist, H = Hip
© Prym Consumer USA
Product Tutorial
How to Use a Dressform (continued)
Be Crafty.
Follow instructions to adjust the dials. A Dritz dressform has
one of two styles of adjustment dials or wheels as shown
below – the auto-set dial or the adjustment wheel. All forms
have 8 sections with 12 adjustment dials. Brand new, out of
the box, all forms are set at their smallest size. Turn dials or
wheels to move sections to match your body’s measurements.
Do not adjust to final measurement all at once. Always
adjust incrementally around the form to avoid stressing
internal parts. Let’s start with the bust adjustment as an
example. Adjust the center front first, turning the dial (or
wheel) only a few measurements at a time; move to the
side and repeat. Then repeat for the back and opposite
side.
Use a tape measure to check your progress. Continue
adjusting until each position is set to the required
measurement. Repeat this process for the waist,
hip and neck.
ADJUST THE SIZE
ADJUST INCREMENTALLY
4.
FYI – very important
Auto-set dials rotate clockwise and counter
clockwise. Measurements line up with arrow on dial.
Adjustment wheels turn up to decrease and
down to increase size. Measurement markings
line up with inner edge of form by the wheel.
92
88
84
cm
33
35
37
ins
Up to decrease
Down to increase
8
4
/
3
3
8
6
/
3
4
8
9
/
3
5
9
1
/
3
6
9
4
/
3
7
9
7
/
3
8
1
0
0
/
3
9
c
m
/
i
n
s
A
B
1
0
0
/
3
9
1
0
2
/
4
0
1
0
4
/
4
1
1
0
7
/
4
2
1
1
0
/
4
3
1
1
2
/
4
4
1
1
5
/
4
5
c
m
/
i
n
s
A
B
Adjustment
Wheels
Auto-set
Dials

© Prym Consumer USA
Product Tutorial
How to Use a Dressform (continued)
Be Crafty.
ADJUSTING THE NECK SIZE
5.
The neck adjustment is slightly different on each dress-
form. Always measure the neck before starting, adjust
incrementally and remeasure until desired size is
achieved.
Twin-Fit, My Double Deluxe and Celine:
Push down on the dial located on the top of the neck,
turning it clockwise to enlarge. NOTE: The optional
finial fits over this dial, and operates the same way.
See instructions to attach the finial.
Petite My Double and Little Miss My Double:
To enlarge, loosen the pin cushion finial by turning it
counterclockwise. Pull the four sections of the neck
slightly apart and measure. Repeat until desired size is
achieved. Turn the pin cushion finial clockwise to
secure.
Small, Medium and Full-Figure My Double:
To enlarge, loosen the pin cushion finial by turning it
counterclockwise. Turn the cap covering the neck until
the desired neck measurement aligns with the small
indicator notch at the front of the form. Turn the pin
cushion finial clockwise to secure.
Lady Valet:
To enlarge, loosen the wooden finial at the top of the
neck by turning it counterclockwise. Gently pull the four
sections of the neck apart; check the measurement
with a tape measure. Continue to adjust until desired
size is achieved. Twist the finial clockwise to secure.
NOTE: When the neck size is expanded on any of the
forms, it pushes the shoulder width out slightly. For
example, if the split between left and right sections is
1/2”, the shoulder moves out about 1/4” on each side.
Measure your own shoulder and mark the form at the
desired shoulder width.
Push down
and turn dial
or finial
Twin Fit
Celine
My Double Deluxe
Little Miss My Double
Lady Valet
Loosen cap & pull sections apart
Turn finial and pull sections apart
My Double
Wider Narrower
At smallest
neck
adjustment
Loosen the finial. Turn cap
clockwise to indicator notch
to push neck outward.
My Double
My Double at largest
neck adjustment
Need more adjustments? Check out our How to Pad Your Dressform tutorial!