Subzero ISO-MONSTAND User manual

MONITOR
ISOLATION
PLATFORM
USER MANUAL
ISO-MONSTAND

2
INTRODUCTION
Thank you for purchasing the SubZero Monitor
Isolation Stand. To get the most from your new
product, please read this manual carefully.
This adjustable monitor stand combines a hardened
plastic and steel construction with copolymer
spring isolators in order to assist with true sound
reproduction from your studio monitors.
BOX CONTENTS
• 1 x SubZero Monitor Isolation Stand.
• 4 x 75mm support legs.
• 4 x 200mm support legs.
FEATURES
• Isolates your monitors from any surface.
• Double spring loaded support structure.
• Two lengths of support legs to suit all
environments.
• Improved stereo image and enhanced bass
response.

3
ADJUSTING THE HEIGHT
You are able to adjust the height of the SubZero
Monitor Isolation Stand by changing the support
legs. Use either the four 75mm support legs or the
four 200mm support legs, which are both provided
in the box, to get the best height for your listening
environment. To adjust the height, please follow the
below steps.
1. Lift the top platform of the stand so it separates
from the four poles & bottom platform.
2. Leave the spring and rubber spring cover inside
the top platform.
3. Remove the poles from the bottom platform.
4. Remove the rubber mount and support from each
end of the four poles.
5. Attach the rubber mounts and supports to the
poles you wish to use.
6. Re-insert the support legs, now with rubber
mounts and supports attached, into the platform.
7. Replace the top platform on the four poles,
ensuring the rubber supports fit securely into the
poles.
Upper Platform
Spring
Rubber Spring Cover
Rubber Mount
Rubber Support
Rubber Support
Rubber Mount
Lower Platform
(Lower Spring / Rubber Spring Cover)
Rubber Support
Rubber Mount
Support Leg
Support Leg

4
ADJUSTING THE PLATFORM
You are able to adjust the platform area of the
SubZero Monitor Isolation Stand to suit your
monitors. To adjust the area, please follow the below
steps. (Note: please ensure monitors are removed
from the stand before adjusting the platform area).
1. Loosen the upper and lower tightening
mechanisms by turning them in an
anti-clockwise direction.
2. Adjust the upper and lower platforms as required.
3. Tighten the upper and lower tightening
mechanisms by turning them in a
clockwise direction.
Upper Tightening Mechanism
Lower Tightening Mechanism

5
SPECIFICATIONS
Suitable for speakers with up to 8” drivers
Height: ..................75mm / 200mm
Platform Arm Length: .....290mm
Support Poles Material:....Steel
Platform Material:.........Hardened Plastic
Weight: .................1.5kg

If you have any more questions about this product, please do not hesitate to contact the
Gear4music Customer Service Team on: [phone] or [email protected]
KETTLESTRING LANE | YORK | YO30 4XF | UNITED KINGDOM
METALLVÄGEN 45A | 195 72 ROSERSBERG | STOCKHOLM | SVERIGE
LAHNSTRAßE 27 | 45478 MÜLHEIM AN DER RUHR | DEUTSCHLAND