Drone Sky Hook DSH-SRD1-P4 User manual

DSH Single/Dual Release & Drop for Phantom 4 /
Phantom 3 series drones
Model numbers: DSH-SRD1-P4, DSH-DRD1-P4, DSH-SRD1-P3, DSH-DRD1-P3
DSH Single/Dual Release & Drop PLUS for Phantom 4 /
Phantom 3 series drones
Model numbers: DSH-SRDP1-P4, DSH-DRDP1-P4, DSH-SRDP1-P3, DSH-DRDP1-P3
Operation Guide v1.1

Controlling the Single Drop Wheel
DSH Models: Single Release & Drop / Single Release & Drop PLUS
Operation Mode 1 –Drone Rotation
Remote Controller (Mode 2)
LEFT STICK
Operation
Quickly Rotate (YAW) the drone two full turns counter clockwise to
drop the payload.
To set the drop wheel back to its previous position, Quickly Rotate
(YAW) the drone again two full turns counter clockwise.

Operation Mode 2 –Drone Remote Controller C1/C2 Button and/or DJI App
Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs
Remote Controller
C1 / C2 Button
Operation
Press C1 or C2 twice in quick succession (while
maintaining about 0.5-1 second between each press) to
drop the payload.
To set the drop wheel back to its previous position, again
press C1 or C2 twice in quick succession (while
maintaining about 0.5-1 second between each press).
DJI App
Operation
Settings –Main Controller Settings –
Advanced Settings
In the App menu switch the drone’s front LEDs ON and
then OFF or OFF and then ON.
(Total of one ON-OFF or OFF-ON cycle) to simulate the
operation of the C1 or C2 buttons on the drone’s remote
controller (see above).
Maintain about 0.5-1 second idle duration between each
switch operation.
Operation Mode 3 –Manual –FUNC button on DSH unit
DSH Release & Drop unit
Operation
Press twice the device’s FUNC button to simulate the
operation of the C1 or C2 buttons on the drone’s remote
controller (see above).
Maintain about 0.5-1 second idle duration between each
operation of the FUNC button.
IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your
command and before the initiation of the next command (False Command Avoidance Algorithm
(FCAA)).

Controlling the Dual Drop Wheel
DSH Models: Dual Release & Drop / Dual Release & Drop PLUS
Operation Mode 1 –Drone Rotation
Remote Controller (Mode 2)
LEFT STICK
Operation
Quickly Rotate (YAW) the drone two full turns counter clockwise to
drop the first payload.
Quickly Rotate (YAW) the drone again two full turns counter
clockwise to drop the second payload.
To set the drop wheel back to its previous position, Quickly Rotate
(YAW) the drone again two full turns counter clockwise.

Operation Mode 2 –Drone Remote Controller C1/C2 Button and/or DJI App
Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs
Remote Controller
C1 / C2 Button
Operation
Press C1 or C2 twice in quick succession (while
maintaining about 0.5-1 second between each press) to
drop the first payload.
Press C1 or C2 twice again in quick succession (while
maintaining about 0.5-1 second between each press) to
drop the second payload.
To set the drop wheel back to its previous position, again
press C1 or C2 twice in quick succession (while
maintaining about 0.5-1 second between each press).
DJI App
Operation
Settings –Main Controller Settings –
Advanced Settings
In the App menu switch the drone’s front LEDs ON, then
OFF and then back ON or OFF, then ON and then OFF.
(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to
simulate the operation of the C1 or C2 buttons on the
drone’s remote controller (see above).
Maintain about 0.5-1 second idle duration between each
switch operation.
Operation Mode 3 –Manual –FUNC button on DSH unit
DSH Release & Drop unit
Operation
Press twice the device’s FUNC button to simulate the
operation of the C1 or C2 buttons on the drone’s remote
controller (see above).
Maintain about 0.5-1 second idle duration between each
operation of the FUNC button.
IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your
command and before the initiation of the next command (False Command Avoidance Algorithm
(FCAA)).

Controlling the AUX Channel (DSH PLUS models only)
DSH Models: Single Release & Drop PLUS / Dual Release & Drop PLUS
Operation Mode 1 –Drone Rotation
Remote Controller (Mode 2)
LEFT STICK
Operation
Quickly Rotate (YAW) the drone two full turns clockwise to
command the AUX Channel to turn ON.
Quickly Rotate (YAW) the drone again two full turns clockwise to
command the AUX Channel to turn OFF.

Operation Mode 2 –Drone Remote Controller C1/C2 Button and/or DJI App
Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs
Remote Controller
C1 / C2 Button
Operation
Press C1 or C2 three times in quick succession (while
maintaining about 0.5-1 second between each press) to
command the AUX Channel to turn ON.
Press C1 or C2 three times again in quick (while
maintaining about 0.5-1 second between each press) to
command the AUX Channel to turn OFF.
DJI App
Operation
Settings –Main Controller Settings –
Advanced Settings
In the App menu switch the drone’s front LEDs ON, then
OFF and then back ON or OFF, then ON and then OFF.
(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to
simulate the operation of the C1 or C2 buttons on the
drone’s remote controller (see above).
Maintain about 0.5-1 second idle duration between each
switch operation.
Operation Mode 3 –Manual –FUNC button on DSH unit
DSH Release & Drop unit
Operation
Press three times the device’s FUNC button to simulate
the operation of the C1 or C2 buttons on the drone’s
remote controller (see above).
Maintain about 0.5-1 second idle duration between each
operation of the FUNC button.
IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your
command and before the initiation of the next command (False Command Avoidance Algorithm
(FCAA)).