Duratool 22-13800 User manual

1
Model –22-13800
18V Cordless Drill
User and Safety Manual

2
Operating Controls
1. Keyless chuck
2. Torque control
3. Ventilation slots
4. Rotational direction switch
5. Easy-grip handle
6. Battery pack
7. Battery release
8. Power trigger
Tool Specifications
Charger voltage / frequency
120 V 60 Hz
Battery voltage
18 V
Amperage of battery
2 x 1200 mAh
No-load speed
0 ~500 RPM
Supported bit range
0.8~10mm
Max torque
13 Nm
Charging time
5~7 hours
4
5
3
6
1
8
2
3
7
5
6

3
Intended Use
This cordless drill (22-13800) was
designed for drilling and fastening into
wood, metal, plastic, and some ceramics
in consumer and light industrial
applications. This tool is not intended for
use in masonry or other applications.
Safety Precautions
The following instructions should serve
for the correct and safe use of this tool
to avoid damage to the tool and work,
and prevent injuries to the user and
others. If this tool is to be used by a
third party, or passed on, this instruction
manual should accompany the tool.
Retain this user manual with your tool
for future reference.
Comply with all warning for this tool.
The manufacture is not liable for injuries
or damage resulting for the incorrect use
of this tool.
Be familiar with the controls and the
proper use of the tool before attempting
to operate it. Know how to quickly stop
use in case of an emergency.
Work area
Keep work area clean and well lit.
Cluttered and dark areas invite
accidents.
Do not operate power tools in the
presence of flammable liquids, gases or
dust. Power tools create sparks and this
tool creates heat which may ignite the
dust or fumes.
Keep children and bystanders away
while operating a power tool.
Distractions or external influence can
cause you to lose control.
Electrical safety
Power tool plugs must match the proper
outlet. Never modify the plug in any
way. Do not use any adapter plugs with
grounded power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
Only plug the charger into a suitable AC
power outlet. Ideal charging
temperature is between 58°~78°F.
Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased
risk of electric shock if your body is
grounded.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock and eventual failure.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.

4
When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a power tool on a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of
electric shock.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool
while you are tried or under the
influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result
in serious personal injury or even death.
Use safety equipment. Always wear eye
protection. Safety equipment such as
dust mask, non-skid safety shoes, hand
hat, or hearing protection used
whenever conditions require will reduce
personal injuries.
Avoid accidental starting. Ensure the
switch is in the off position before
plugging in.
Carrying power tools with your finger on
the switch or plugging in power tools
that have the switch on increases the
likelihood of accidents.
Remove any adjustment key or wrench
before turning the power tool on. A
wrench or a key left attached to a
rotating or heating part of a power tool
may result in personal injury.
Do not overreach your work area while
using a power tool. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away
from moving parts or heaters. Loose
clothes, jewelry or long hair can be
caught in moving parts or heaters.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust related
hazards.
Power tool use and care
Do not force the power tool. Use the
correct power tool for your application.
The proper power tool will do the job
better and safer at the rate of which it
was designed.
Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired or discarded.
Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures

5
reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the reach
children and do not allow persons
unfamiliar with the power tool of these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
Maintain power tools. Check for
misalignment or sticking of moving
parts, breakage of parts and other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
Use the power tool, accessories and tool
bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool,
taking into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from intended
could lead to a hazardous situation.
Service
Have your power tool serviced only by
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Drill specific safety
Use only the batteries and charger
which are supplied by the manufacturer.
Mixing batteries or chargers may result
in a fire or battery explosion.
When battery is not in use, keep it away
from metal and other conductive
materials that could short the leads and
result in burns or fire.
If the battery pack is used in abusive
conditions, such as high heat, shock, or
moisture, the battery can potentially
leak. Avoid contact with the battery;
flush skin thoroughly if contact does
occur. If the battery liquid contacts eyes
or is ingested, consult a medical
physician immediately.
Know your surface that you are drilling
before operation. Walls, floors, and
ceilings frequently have electrical, gas,
water, or other utilities hidden behind
them. Be sure to thoroughly check and
understand the situation before drilling
or fastening.
Make sure all parts have finished moving
before laying drill down, or holstering it.
Avoid frequent stalling when screwing or
drilling, as this add additional wear on
the battery.
Always protect the tool, batteries, and
charger from moisture, including
excessive humidity. Never leave tool
unattended outdoors or leave anything
outdoors overnight.
Store tool, charger, and batteries in a
cool, dry location, not to exceed 100°F.

6
Unpacking
When unpacking the tool for the first
use, make sure that all components are
included and undamaged. If any parts
are missing or broken, please call your
distributor before use.
Initial Operation
The battery is shipped only partially
charged. Fully charge the battery for a
minimum of 5 hours before its first use.
The full capacity of the batter will be
established after the first 4~5 charging
cycles.
1. Remove the battery pack (6) from
the tool by pressing the release
buttons (7) on either side of the
battery and slide tool forward.
2. Slide the battery pack on to the
charging base, ensuring that it locks
in place.
3. Place the charging base with battery
on a secure bench or table near the
power supply point.
4. Connect the small plug of the AC
adapter into the charging base.
5. Connect the AC adapter to the
suitable AC power outlet.
6. Allow unit to fully charge.
Autolocking Chuck
All trade-standard drill and fastening bits
up to 10mm diameter can be used with
the drill chuck. The tool features a fast-
action drill chuck (1) that is used to
change drill bits without the use of a
chuck key.
1. Remove the battery pack (6)
2. Open the drill chuck (1) by holding
the rear section of the chuck and
turn the front section in a clockwise
direction
3. Insert the bit firmly into the chuck
and tighten by turning the front
section while holding the rear
section secure.
Torque Adjustments
The cordless drill features a step toque
adjustment (2) to avoid damage to
screws, work surface, and the drill. By
turning the torque adjustment knob, you
can set the necessary step from 1 (easily
turned screws) to 16 (tight, harder to
turn screws). Always select the
appropriate torque for the work being
completed at the time.
Variable Speed Control
This tool features a variable speed
trigger (8) that responds to the amount
of pressure applied. For low speed,
lightly squeeze the trigger. For maximum
speed, fully squeeze the trigger.
Changing Rotational Direction
By sliding the rotational direction switch
(4) to the left or the right of the tool, the
bit rotation direction can be changed
from clockwise to counter-clockwise.
Only switch direction when bit head is
not turning.
Maintenance and Storage

7
Before carrying out any maintenance
operation, disconnect the battery from
the tool.
Always keep the tool and ventilation
slots clean. They can be wiped with a
lightly dampened cloth. Regular cleaning
of the appliance will ensure efficiency
and prolong the life of the tool.
If the tool should fail, despite the
rigorous manufacturer’s tests and
quality control, the tool can be replaced
under a 6 month warranty from date of
purchase.
Use only original spare parts, batteries,
and charges.
Store the tool in a cool, dry
environment; do not store near
flammable or corrosive materials.
Never expose the tool to liquids or store
in a humid environment.
Battery Disposal
When batteries have been fully
exhausted (average 2 years from original
use), dispose of them according to local
regulations.