EBOX 481A102 User manual

Tilt & Table motorized height adjustable
and tilting mobile stand
for Interactive Flatpanel displays up to 75”
Installation manual
Part nr.902907-01
Part number Description
487A03 Tilt & table motorized height adjustable and tilting stand travel 26”[660 mm] black max 220Lbs.(100kg) US power cable
487A03002 Tilt & table motorized height adjustable and tilting stand travel 26”[660 mm] black max 220Lbs.(100kg) EU power cable (Schuko)
481A102 Adapter set for screens with VESA 700x500, 700x600, 800x500 and 800x600
481A103 Adapter set for screens with VESA 700x200, 700x400, 800x200 and 800x400
INSTALLATION MANUAL AND INSTRUCTIONS FOR USE
PART NUMBERS AND ACCESSORIES

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
2
General warnings:
This product is intended for installation by a trained professional (the installer), do not attempt to install the product
yourself.
A correct installation of this product is extremely important for the safe and correct use of it. The installer must follow the
instructions in this manual for correct installation. Not doing so may result in injury to persons or damage to equipment.
The manufacturer is not responsible for and does not control the correct installation according to this installation manual.
It is the responsibility of the installer to ensure that the floor can support at least four times the combined weight of the
screen plus the mounts. The maximum load for this product is specified in this installation manual.
Hardware for the correct installation of the mount and the screen is included with the product, use the supplied hardware
for its intended purpose. Do not use alternative hardware before consulting with the manufacturer of the product.
Follow the mounting instructions and warnings for installation and use of the screen supplied by the screen manufacturer,
make sure the weight specifications of the screen used plus other brackets and hardware is within the weight limits
specified for the use of the mount.
Warranty terms and conditions:
1. Manufacturer guarantees that a product that manufacturer has determined to be defective as a result of a manufacturing or material
defect will be repaired or replaced (to be determined by Manufacturer), without cost, on condition that a claim is made within the
period of warranty, which is 3 years.
2. In the event of a claim being made under the terms of the warranty, the product needs to be returned to the manufacturer by the
installer accompanied by a RMA form, which we will send on request. The freight costs from the installer to the manufacturer are
covered under the terms of the warranty provided the RMA instructions are followed with regard to the forwarder.
3. The guarantee provided by manufacturer shall lapse or be void if:
•a defect arises as the result of incorrect or inexpert assembly or installation.
•in case of improper use or any use not in accordance with the instructions.
•in case of normal wear and tear.
•without the written consent of the manufacturer, customer or a third party have introduced changes to the product or have
attempted to do so, the product has been used for anything other than its intended use or if products were processed or revised in
some way other than was instructed.
•A customer or a third party engaged by customer performed repairs without the written consent of the manufacturer.
The intended use of the product:
The product is intended to be used for the mounting and height adjustment of passive or interactive flatscreen display panels.
The product is intended for in-door use in classrooms, offices or meeting rooms, at temperatures ranging between 50 and 104 °F / 10 to
40 °C.
The product is intended for use by adults; children under the age of 16 should only use the product under adult supervision.
Specifications and limitations of the product:
Maximum weight capacity: 220lbs / 100kg
Maximum screen size: 75” diagonal
Maximum slope during moving: 10 degrees
The manufacturer:
Thomas Regout Inc; 121 Smokehill Lane
Woodstock 30188 GA USA
Regout Balance Systems B.V; Industrieweg 40
6219NR Maastricht; The Netherlands

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding
of factory warranty! It is the certified installer’s responsibility to make sure all mounting systems/ accessories are properly assembled
and installed using the instructions provided.
WARNING:
Failure to provide adequate structural strength for this mounting system can result in serious personal injury or damage to equipment!
It is the certified installer’s responsibility to make sure the structure to which this mounting system is attached to or placed upon is flat
and even and can support at least four times the combined weight of all equipment. Reinforce the structure or surface as required
before installing the mounting system.
WARNING:
Use this mounting system only for its intended use as described in these instructions. Do not use attachments or accessories not
recommended by the manufacturer.
WARNING:
Never operate this mounting system if it is damaged. Return the mounting system to your dealer, a service center or contact the
manufacturer for examination and repair.
WARNING:
Do not use this product outdoors.
WARNING: RISK OF INJURY TO PERSONS!
Do not place video equipment such as televisions or computer monitors on cart legs. (where applicable)
WARNING:
Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the certified installer’s responsibility
to make sure the combined weight of all accessories and equipment attached to the 487A03 assembly up to (and including) the display
does not exceed the maximum load of 220 lbs / 100 kg. Use with heavier screens may result in instability causing tip over resulting in
death or serious injury! The height adjustable feature of this trolley will not function properly if the weight exceeds the given maximum
load.
WARNING: RISK OF SERIOUS INJURY OR DEATH!
Placing a remote control or toy on the trolley or wall mount may encourage a child to climb onto the product causing the trolley to tip
over onto the child. DO NOT place remote controls or toys on the product!
WARNING: RISK OF SERIOUS INJURY OR DEATH!
Relocating audio and/or video equipment to the trolley may result in the trolley collapsing or overturning onto a child. DO NOT relocate
audio and/or video equipment to the trolley!
NOTE:
The motorized height adjustable stand or wall mount can support all kinds of screen sizes as long as the distance between floor frame
and bottom screen is at least 2 inch / 50mm. The intended maximum screen size is 75” diagonal.
DISCLAIMER
The manufacturer and its affiliated corporations and subsidiaries, intend to make this manual accurate and complete. However, the
manufacturer makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for
every possible contingency in connection with the installation or use of this product.
The information contained in this document is subject to change without notice or obligation of any kind. The manufacturer makes no
representation of warranty, expressed or implied, regarding the information contained herein. The manufacturer assumes no
responsibility for accuracy, completeness or sufficiency of the information contained in this document.
All rights reserved.

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
4
UNPACKING / CONTENT OF THE PACKAGING

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
5
ASSEMBLY

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
6
ASSEMBLY

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
7
ASSEMBLY

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
8
MOUNTING THE SCREEN

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
9
INSTRUCTIONS FOR USE

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
10

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
11
RESET CONTROL BOX –MOTOR SYNCHRONISATION

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
12
DIMENSIONS
FAQ: Frequently Asked Questions
A: The e-Box® does not move up or down
A1: Check the power lead is connected to the wall outlet, if not connect the power lead.
A2: Check the cable connections to the control box Page 10 step 1 and 2, make sure the cables are connected.
A3: Check the connection of the short motor cable to the control box cable, make sure the cables are connected.
A4: Check for wiring damage from bad assembly: page 5 on step 4: If wiring is damaged, disconnect the e-Box® from
the wall outlet and contact your dealer for a replacement or repair.
WARNING: DO NOT ATTEMPT TO REPAIR BROKEN WIRING!
A5: The e-Box® motors are intended for intermittent use, continuous or extended use (more than 6 minutes) will
cause over-heating and a safety system will switch the motors off, if this happens allow the motors to cool down
for at least 1 hour. The system will automatically switch back to normal when the motors have cooled down.
A6: If steps A1 to A4 have been found in order and the problem still exists, contact your dealer for repair of the unit.
B: The motors don’t move smoothly or the left and right motors are at a different height
B1: Follow steps 3 to 6 on page 10 to synchronize the motors
C: The e-Box® only moves down and not up: the e-Box went into safe-mode, a power cut may have happened during
operation, or there is a bad wiring connection.
C1: Follow the steps 3 to 6 on page 10 to synchronize the motors
C2: If the problem still exists follow steps A1 to A4

Tilt & Table motorized height adjustable
and tilting mobile stand
Regout Balance Systems B.V. Industrieweg 40 6219NR Maastricht the NetherlandsThomas Regout Inc. 121 Smokehill Lane Woodstock 30188 GA USA
13
RJ45 CONNECTION DIAGRAM