Ego Power+ FN1800E User manual

FA N
OPERATOR'S MANUAL
56 VOLT LITHIUM-ION
CORDLESS MISTING FAN
MODEL NUMBER FN1800E
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
MNL_EGO_FN1800E_AV01.01_220613

A
1. Top Handle
10. Control Interface
(Fig. 1a)
9. Filter
8. IntakeTube
7. Battery Compartment
6. Telescopic Handle
5. Misting Nozzle (x4)
4. Wheel
2. Fan Enclosure
3. Fan Enclosure Lock Knob
A1
15. Air Speed Adjustment Button
11. Power Button 12. Air Speed Indicator
13. TURBO Indicator17. Misting Indicator
14. TURBO Button
16. Misting Mode
Selection Button
B
Wrench
Wheel Axle
Screw with washer
Wheel
Hubcap
C
Wrench
Screw with
Washer
Top Handle
Screw Hole

D E
F
Forward 90°
Backward 135°
Battery
Compartment Cover
Battery Release
Button
G
Clear Clogged
H
Filter
Lower Part
Sponge Mesh
Upper Part
I2
Fan BladeLock Cover
1
2
I1
Screw (x6)
Front grill guard
Nut
Intake Tube
Black
Rubber
J
“CLICK”

K2
K1

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E 5
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
WARNING: To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand all safety
instructions in this Operator’s Manual, including all safety
alert symbols such as “DANGER,” “WARNING,” and
“CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Safety Alert Precautions that involve your
safety
Read &
Understand
Operator’s
Manual
To reduce the risk of
injury, user must read and
understand operator’s
manual before using this
product.
Rain
Condition Do not expose to rain.
IPX4
Ingress
Protection
Degree
Protection from splashing
water
Direct
Current
Type or a characteristic of
current
V Volt Voltage
cm Centimeter Length or size
m/s Meters Per
Second Speed
L/h Liter Per
Hour Flow Rate
°C Celsius Temperature
kg Kilogram Weight
GENERAL SAFETY WARNINGS
READ ALL INSTRUCTIONS BEFORE USING THIS
PRODUCT!
WARNING: To reduce risk of fire, electric shock, or
injury:
◾Know your misting fan. Read the instruction
manual carefully. Learn the fan’s applications and
limitations as well as the specic potential hazards
related to this fan. Following this rule will reduce the
risk of electric shock, fire or serious injury.
◾This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
◾Children should be supervised to ensure that they do
not play with the appliance.
WORK AREA SAFETY
◾Do not operate fan in explosive atmospheres, such as
in the presence of ammable liquids, gases or dust.
◾Keep children and bystanders away while
operating an appliance. Distractions can cause you
to lose control.
◾Use caution when using in windy conditions. Winds
may carry mists into electrical wiring or devices.
◾Do not expose appliance to rain or wet conditions.
Water entering an appliance will increase the risk of
electric shock.

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E6
PERSONAL SAFETY
◾Stay alert, watch what you are doing and use
common sense when operating appliance. Do
not use the appliance while tired, upset, or under
the inuence of drugs, alcohol, or medication. A
moment of inattention while operating appliance may
result in serious personal injury.
◾Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to battery
pack, picking up or carrying the appliance. Carrying
appliance with your finger on the switch or energizing
appliance that have the switch on invites accidents.
◾Remove any adjusting key or wrench before
turning the appliance on. A wrench or a key left
attached to a rotating part of the appliance may result
in personal injury.
◾Do not overreach. Keep proper footing and balance
at all times. This enables better control of the
appliance in unexpected situations.
◾Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
◾Verify that all connections are secure before
operating the appliance.
◾Do not let familiarity gained from frequent use of
appliances allow you to become complacent and
ignore the appliance safety principles. A careless
action can cause severe injury within a fraction of a
second.
USE AND CARE
◾Do not use the appliance if the switch does not
turn it on and off. Any appliance that cannot be
controlled with the switch is dangerous and must be
repaired.
◾Disconnect the battery pack from the appliance
before making any adjustments, changing
accessories, or storing appliance. Such preventive
safely measures reduce the risk of starting the
appliance accidentally.
◾Store idle appliance out of the reach of children
and do not allow persons unfamiliar with the
appliance or these instructions to operate the
appliance. Appliances are dangerous in the hands of
untrained users.
◾Maintain appliance and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the appliance’s operation. If damaged, have the
appliance repaired before use. Many accidents are
caused by poorly maintained appliance.
◾Use the appliance and accessories etc. in
accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the appliance for operations
different from those intended could result in a
hazardous situation.
◾Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
WARNING: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
BATTERY TOOL USE AND CARE
◾Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of re when
used with another battery pack.
◾Use appliance only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
◾Use only with EGO’s battery packs and chargers listed
in as below:
BATTERY PACK CHARGER
BA1400, BA2800, BA4200,
BA1400T, BA2800T, BA4200T,
BA5600T, BA6720T
CH2100E, CH5500E,
CH7000E
◾When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
◾Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
◾Do not use a battery pack or appliance that is
damaged or modied. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
◾Do not expose a battery pack or appliance to
re or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
◾Follow all charging Instructions and do not
charge the battery pack or appliance outside the
temperature range specied in the instructions.

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E 7
Charging improperly or at temperatures outside the
specified range may damage the battery and increase
the risk of fire.
SERVICE
◾Have your appliance serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the appliance is
maintained.
◾Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SAFETY INSTRUCTIONS FOR CORDLESS MISTING
FAN
◾Do not allow the fan to be used as a toy. Close
attention is necessary when used by or near children.
◾Children can fall into buckets and drown. Keep
children away from buckets with even a small amount
of liquid.
◾ONLY use clean, cold water.
◾Do not use this misting fan to spray pesticides,
liquid fertilizers, chemicals, or any liquids other
than clean water. Spraying these substances could
result in serious injury or illness to the operator or
bystanders.
◾Never direct mist or water toward any electrical
wiring or devices.
◾Ensure that the battery compartment cover
is completely closed to prevent water from
contacting battery or entering battery port.
◾Keep the appliance and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake uids, gasoline, petroleum-
based products, or any strong solvents to clean your
fan. Following this rule will reduce the risk of loss of
control and deterioration of the enclosure plastic.
◾Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk
of serious personal injury, never use any cordless
product in the presence of open ame. An exploded
battery can propel debris and chemicals. If exposed,
flush with water immediately.
◾Save these instructions. Refer to them frequently
and use them to instruct others who may use this fan.
If you loan this fan to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
◾Be aware that high humidity levels may encourage the
growth of biological organisms in the environment.
◾Do not permit the area around the humidifier to
become damp or wet. If dampness occurs, turn the
output of the humidifier down. If the humidifier output
volume cannot be turned down, use the humidifier
intermittently. Do not allow absorbent materials,
such as carpeting, curtains, drapes, or tablecloths, to
become damp.
◾Never leave water in the reservoir when the appliance
is not in use.
◾Empty and clean the humidifier before storage. Clean
the humidifier before next use.
WARNING: Micro-organisms that may be present
in the water or in the environment where the appliance
is used or stored, can grow in the water reservoir and be
blown in the air causing very serious health risks when
the water is not renewed and the tank is not cleaned
properly every 3 days.
◾Rechargeable batteries are to be removed from the
appliance before being charged
◾Exhausted batteries are to be removed from the
appliance and safely disposed of
◾If the appliance is to be stored unused for a long
period, the batteries should be removed
◾The supply terminals are not to be short-circuited.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Voltage 56 V
Fan Blade Diameter 45.7 cm
Fan Speed Settings 6 (including “Turbo”)
Max. Air Volume 7000 m3/h
Max. Air Speed 10.3 m/s
Misting Water Volume I: 4.5 L/h
II: 11.4 L/h
Recommended Storage
Temperature -20°C ~ 70°C
Weight (without battery pack) 10.4 kg

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E8
PACKING LIST
PART NAME QUANTITY
Misting Fan 1
Wheel Assembly
Wheel 2
Hubcap 2
Screw with washer 2
Top Handle
Assembly
Top Handle 1
Screw with washer 4
Wrench 1
Spare Nozzle 1
Operator’s Manual 1
DESCRIPTION
KNOW YOUR MISTING FAN (Fig. A & Fig. A1)
1. Top Handle
2. Fan Enclosure
3. Fan Enclosure Lock Knob
4. Wheel
5. Misting Nozzle (x4)
6. Telescopic Handle
7. Battery Compartment
8. Intake Tube
9. Filter
10. Control Interface
11. Power Button
12. Air Speed Indicator
13. TURBO Indicator
14. TURBO Button
15. Air Speed Adjustment Button
16. Misting Mode Selection Button
17. Misting Indicator
ASSEMBLY
WARNING: If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use with this
fan. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING: Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when the product is not in use.
Removing the battery pack will prevent accidental starting
that could cause serious personal injury..
UNPACKING
◾This product requires assembly.
◾Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
WARNING: Do not use this product if any parts on the
packing list are already assembled to your product when you
unpack it. Parts on this list are not assembled to the product
by the manufacturer and require customer installation. Use of
a product that may have been improperly assembled could
result in serious personal injury.
◾Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
◾Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
◾If any parts are damaged or missing, please return the
product to the place of purchase.
ASSEMBLING THE WHEELS (Fig. B)
1. Align the hole of one of the wheels with the wheel
axle of the fan, and mount the wheel onto the axle.
2. Thread one of the wheel screws through the hole of
the wheel into the wheel axle, then tighten the screw
with the supplied wrench.
3. Snap the hubcap onto the wheel.
4. Assemble the other wheel following above steps 1 - 3.
ATTACHING THE TOP HANDLE (Fig. C)
1. Align four supplied screws with the holes in the top
handle and the holes in the fan enclosure.
2. Insert the screws and then tighten them with the
supplied wrench.
OPERATION
WARNING: Do not allow familiarity with this product
to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING: Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E 9
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced.
WARNING: Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when it is not in use. Removing
the battery pack will prevent accidental starting that could
cause serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
◾General ventilation in most household applications
◾Outdoor cooling while connected to a water source
ADJUSTING THE FAN ANGLE (Fig. D)
1. Grasp the top handle to hold the fan enclosure.
2. Rotate the fan enclosure lock knob counterclockwise
to loosen the adjustable fan enclosure.
3. Tilt the adjustable fan enclosure forward or backward
to your desired angle. The fan can pivot up to 90°
forward up to 135° backward.
4. Rotate the lock knob clockwise to secure the fan
enclosure at your desired angle.
TO INSTALL/REMOVE BATTERY PACK (Fig. E)
CHARGE THE BATTERY PACK BEFORE FIRST USE
1. Pull the battery compartment cover to open it.
2. To install the battery pack, align the ribs of the
battery pack with the mounting slots in the battery
compartment, and then press the battery pack into
the battery compartment until it snaps into position.
To detach the battery pack, press the battery-
release button to release the battery pack, and then
lift the battery pack out of the battery compartment.
3. Push the battery compartment cover to close it.
Ensure that it is completely closed to prevent water
from contacting battery or entering battery port.
TO START/STOP THE MISTING FAN
NOTICE: The initial factory setting for the air speed is
level 3. The fan will save the last used air speed setting
and will revert to it upon restart.
IMPORTANT: Turbo setting will not be saved.
NOTICE: The misting setting will not be saved, and by
default will be off every time the fan is turned on.
POWER BUTTON
◾Press the power button briefly to turn the fan ON.
◾Press the power button briefly again to turn the fan
OFF.
AIR SPEED ADJUSTMENT
Normal Air Speed
◾Press the “+” button to accelerate the air speed and
press the “-” button to decrease the air speed. There
are 5 speed levels.
◾The air speed indicator displays green lights
corresponding to the current speed levels.
TURBO Mode
◾Press the “TURBO” button, the TURBO indicator will
light up green and the fan will shift into “TURBO”
mode, i.e. the highest air speed.
◾When in “TURBO” mode, press “TURBO” button again,
the TURBO indicator will turn off and the fan will
resume the previously active air speed.
◾When in “TURBO” mode, press “-” button, the TURBO
indicator will turn off and the fan will shift to the air
speed level 5.
MISTING FUNCTION
USING THE FAN WITH A WATER BUCKET (NOT INCLUDED)
(Fig. F)
WARNING: Children can fall into buckets and drown.
Keep children away from buckets containing even a small
amount of liquid.
NOTICE: Clean the bucket with soap and water before
each use.
1. Disconnect the battery pack.
2. Place the bucket on a flat, level surface.
3. Add ONLY clean, cold water into the bucket. Do not
overfill.
4. Immerse the filter end of the intake tube down into
the water bucket.
NOTICE: Do not bend the intake tube, and always make
sure the water flows smoothly through the tube.
5. Install the battery pack and close the battery
compartment cover.
6. Press the power button to turn the fan ON.
7. Press the misting mode selection button to start
misting:

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E10
◾Press the misting mode selection button once and
the misting indicator will light up two green lights
which indicates the ‘continuous’ misting mode -
misting all the time without stopping.
NOTICE: It may take around 15 seconds before
you actually see the mist coming out of the misting
nozzles the first time. This delay is due to the time
it takes for water to flow from the water bucket to
the nozzles.
◾Press the misting mode selection button again and
the misting indicator will light up one green light
which indicates the ‘intermittent’ misting mode -
misting for 5s every 10s.
◾When the misting is in intermittent mode, press
the misting mode selection button again and the
misting indicator lights will turn off and the misting
will stop.
NOTICE: When the misting operation is finished, pull the
intake tube out of the water and run the fan in misting
mode until all the water clears from the tube. This helps
prevent the residual water in the tube from causing
unexpected misting when the fan is started again.
USING THE FAN WITHOUT MISTING
If desired, this product may be used as a fan only, when
not connected to a water source. When not in use, always
place the intake tube in its storage area (See section
“STORAGE” in this manual) to protect it from damage and
contamination.
INTERNAL PROTECTION
When the misting function is activated but no water mist
is coming out:
◾The water pump will keep running for a short while,
and then stop automatically to protect internal
electronics.
◾Depending on misting mode, the misting indicator will
display one or two solid green lights for a short while,
and then flash green light(s) continuously as an alert
for the operator to:
a. Check if the intake tube is properly immersed into
water.
b. Check if the misting nozzle(s) is clogged, and
clean according to the “NOZZLE MAINTENANCE”
chapter.
c. Press the misting mode selection button to restart
misting.
MAINTENANCE
WARNING: When servicing, use only identical
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified
service technician.
WARNING: To avoid serious personal injury, always
remove the battery pack from the product when cleaning
or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in
serious personal injury.
NOZZLE MAINTENANCE (Fig. G)
WARNING: Ensure that all misting nozzle
maintenance is performed properly to prevent water
leaks. The leaks can result in a slippery surface creating a
slip and fall hazard or cause property damage.
To clear the nozzles
1. Turn off the fan and remove the battery pack.
2. Remove the clogged brass misting nozzles from the
front grill guard of the fan enclosure by rotating them
in a counterclockwise direction.
3. Disassemble each affected nozzle into parts.
4. To remove any foreign particles clogging or
restricting the nozzles, flush the nozzle parts with
water. To remove scale (mineral) buildup, clean the
nozzle parts with white vinegar or other de-scaling
agent as necessary.
5. Reassemble the nozzles.
NOTICE: To prevent clogging, make sure that the nozzle
is assembled exactly as shown as Fig. F.
6. Reattach the clean nozzles to the front grill guard.
FILTER MAINTENANCE (Fig. H)
Periodically examine the filter at the end of the intake
tube to make sure that it is in good condition.

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E 11
1. Pull the filter off of the intake tube.
2. Unscrew the filter into parts and take out the sponge
mesh.
3. Rinse the sponge mesh or replace it if necessary.
4. Reassemble the filter and reconnect it to the intake
tube.
FAN ENCLOSURE MAINTENANCE (Fig. I1 & Fig. I2)
WARNING: Ensure the battery packs are removed
from the product before removing the guard.
1. Loosen and remove the six screws to PARTIALLY lift
the front grill guard off from the fan enclosure.
CAUTION: To prevent damage, do not remove the front
grill guard completely without disconnecting the intake tube
FIRST.
2. Depress the black rubber at end of the nut to pull out
the intake tube.
3. Remove the front grill guard completely.
4. Rotate the fan blade lock cover clockwise to release
the fan blade from the shaft.
5. Remove the fan blade.
6. Clean the fan blade and the enclosure interior as
necessary.
7. Reassemble them in reverse order, and make sure:
◾the intake tube is properly connected to the nut.
◾the intake tube is placed properly into the slot on
the grill guard.
TRANSPORTING
WARNING: Always remove the battery pack from
the fan when transporting. Removing the battery pack
will prevent accidental starting that could cause serious
personal injury.
◾The fan is equipped with a top handle for carrying the
fan for short-distance trips or crossing rough surface/
terrain.
◾For long-distance transport, use the telescopic handle
to roll the fan. Use the top handle to tilt the fan and
then pull out the telescopic handle until you hear a
“click”. When the telescopic handle is not used, push it
into the tool (Fig. J).
STORAGE
1. Remove the battery pack.
2. Clean the fan thoroughly.
3. Empty the intake tube and filter.
4. Place the intake tube into either storage position
located at the back of the fan (Fig. K1 & Fig. K2).
5. Store the fan in a dry, well-ventilated area, out of
the reach of the children. Do not store the fan on or
adjacent to fertilizers, gasoline, or other chemicals.
PROTECTING THE ENVIRONMENT
Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities.
Contact your local government for
information regarding the collection
systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get
into the food chain, damaging your health
and well-being.

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E12
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Tool does not work.
◾Low battery pack capacity. ◾Charge the battery pack.
◾The battery pack or the fan is too hot. ◾Turn off the fan and allow the fan and
battery pack to cool.
There is no water
misting and the
misting indicator
flashes two green
lights.
◾The intake tube suctions no water,
activating internal protection for the water
pump inside the tool.
◾Check and ensure that there is enough
water in the bucket and the intake
tube is properly immersed into the
water.
◾The misting nozzle(s) got clogged
during operation, activating the internal
protection for the water pump.
◾Clean the nozzle(s) according to the
“NOZZLE MAINTENANCE” chapter
and reassemble them as instructed.
Water leakage
happens after
fan enclosure
maintenance.
◾The nut connecting with the intake tube
got loose unexpectedly.
◾Open the fan enclosure according
to the “FAN ENCLOSURE
MAINTENANCE” chapter. Inspect and
ensure that the nut is fully tightened.

56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E 13
WARRANTY
EGO WARRANTY POLICY
5 years warranty on EGO outdoor power equipment and 3 years warranty on EGO Power+ System battery packs and
chargers.
Please contact EGO customer service on Australia 1300 000 EGO(1300 000 346),
New Zealand 0508 000 EGO (0508 000 346) any time you have questions or warranty claims.
LIMITED SERVICE WARRANTY
FOR FIVE YEARS from the date of original retail purchase, this EGO product is warranted against defects in material or
workmanship. Defective product will receive free repair.
FOR THREE YEARS from the date of original retail purchase, the EGO Power+ System battery pack and charger are
warranted against defects in material or workmanship. Defective product will receive free repair.
This warranty does not cover the blade, which is a part that can wear out from normal use within the warranty period.
◾This warranty applies only to the original purchaser at retail and may not be transferred.
◾The warranty period for any EGO product or part used for industrial, professional or commercial purpose is one year.
◾This warranty is void if the product has been used for rental purpose.
◾This warranty does not cover the damage resulting from modification, alteration or unauthorised repair.
◾This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect
resulting from misuse, abuse (including overloading of the product beyond capacity and exposure to water or rain),
accidents, neglect or lack of proper installation, and improper maintenance or storage.
◾This warranty does not cover normal deterioration of the exterior finish, including but not limited to scratches, dents,
◾paint chips, or to any corrosion or discoloring by heat, abrasive and chemical cleaners.
HOW TO OBTAIN SERVICE
For warranty service, please contact EGO customer service on Australia 1300 000 EGO(1300 000 346), New Zealand
0508 000 EGO (0508 000 346). When requesting warranty service, you must present the original dated sales receipt. An
authorised service center will be selected to repair the product according to the stated warranty terms.
ADDITIONAL LIMITATIONS
Chervon Australia Pty Ltd ABN 36 165 077 501(“Chervon”) warrants to the original domestic purchaser that this
product will be free from defects in materials and workmanship for 5 years from date of purchase, and any battery or
charger will be free from defects in materials and workmanship for 3 years from date of purchase. To make a claim,
return the faulty item together with proof of purchase directly to your closest service agent or to the place of purchase.
Any handling and transportation costs (and other expenses incurred in claiming this warranty) are not covered by this
warranty and will not be borne by Chervon. The replacement product or part or repaired product will be made available
for your collection at an address nominated by Chervon. Where a valid warranty claim is made, Chervon will replace
the defective product or repair the fault. Where the product is repaired, Chervon may use refurbished parts. This
warranty does not cover normal wear and tear, misuse or abuse. This warranty may also be further limited or voided
as specifically detailed in the product Manual. Chervon has no other liability under this warranty.The benefits to you
given by this warranty are in addition to other rights and remedies imposed by State and Federal legislation that cannot
be excluded. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Road, Rowville, VIC 3178.
Phone Number: Australia 1300 000 EGO(1300 000 346), New Zealand 0508 000 EGO (0508 000 346).
Email address: [email protected].