EKASN C900 User manual
USER MANUAL
Thank you for your trust and support for our products sincerely.
Please read this manual before operating your smart projector,
and keep it for future reference.
V1.0
EKASN C900 DLP Smart Projector
About the product manual (described as “manual"for short below)
All Trademarks, Font Size in the manual belong to the owner of their respective
rights.
ΖIWKHFRQWHQWVLQWKHPDQXDOLVGLHUHQWZLWKWKHDFWXDOSURGXFWSOHDVHEHEDVHG
on the actual Product.
If there are any questions about the manual, please contact our company in 7 days
from the day you bought the device, otherwise we’ll think you are agreed with all
the manual contents.
Ȋ7KH$GRSWHG7UDGHPDUNV+'0Ζ+'0Ζ+LJK'HȴQLWLRQ0XOWLPHGLDΖQWHUIDFHDQG
the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries."
Please read this instruction carefully before using the product
Thanks for purchasing and using our company product, in order to make sure your
personal safety and rights, please read our product manual and operating
instructions carefully, our company would not take the responsibility of which
caused by any non-standard operations, please understand.
There is an electronic directions app in the product system
Select how to turn on the projector
1
1. Plug projector into power supply by provided power adapter, please ensure that
the machine has been powered correctly.
Step 1: Turn the ON/OFF switch on device body to the ON position (if it is not
turned on, it cannot be operated),
Note: This product has a built-in battery. After sliding the switch to ON, the indicator
light will be displayed as a red-light source, and it will be displayed as a blue light
source when working.
①Low battery → 5HGOLJKWȵDVKHV
②Charge → JUHHQOLJKWȵDVKHV
③Fully charged → green light is always on
④Normal working battery status →blue light is always on
⑤Standby state → %OXHOLJKWȵDVKHV
Power Button
1 2
English
Step 2:3UHVVSRZHUVZLWFKRQGHYLFHERG\WRWXUQRQRPDFKLQHRUSUHVVWKH
SRZHUEXWWRQRQUHPRWHFRQWUROWRWXUQRQR
Step 3: If you don't use it for a long time, please slide the toggle switch to OFF.
Note: Avoid the machine be turned on by mis-touch when the product is placed in
the storage bag, thus please be sure turn the Power Switch to OFF state and the
indicator light goes out before putting it into bag.
Rotate focusing wheel on right side to adjust the focus manually.
Focus wheel
Power Button Mouse
Mute
Up
Right
Home
Device setting
OK
Left
Return
Down
Volume - Volume +
Setting
Projection focusing method
2
Keystone correction
Notice:
Please aim at projection screen when you use remote control to adjust.
Please pull out the battery of remote control if you did not use it for a long time.
Lens maintenance:
Please wipe it by soft dust-free cloth or with some alcohol if the lens gets dirty.
The glass lens will be easily scratched if normal care doesn’t do properly, which will
DHFWWKHYLVXDOHHFW
Notice:
Before maintaining the lens, please disconnect projector from power supply, wait
projector lens to be cooled down. Do not touch the lens with your hands. Do not
use benzene, thinners, chemical sprayers and other chemicals.
(Please maintain projector lens accordance with our instructions strictly.)
Remote key description
3
3 4
Enter app and browse electronic instructions
After-sales warranty service
1 year warranty service
Promise: For product performance failure caused by non-human damage, free
repairing and parts replacement will be provided within 1 year from the day you
received the product.
Not covered by Warranty (but not limited to the following)
As a responsible seller, we’ll take full responsibility for everything we sell, but in
some avoidable situation, the device will not be covered by our warranty.
We strongly recommend you follow our instruction and read following information
carefully before using.
• Any repair carried out without prior authorization, misusage, impact, carelessness,
DEXVHȵXLGLQWDNHDFFLGHQWSURGXFWTXDOLW\SUREOHPVEHFDXVHWKHLPSURSHU
LQVWDOODWLRQVRIWZDUHV\VWHPWHDUXSRUDOWHUWKHSURGXFWWDEOHSURGXFWVHULHV
number, false proof mark and the seals.
ȏ1RHHFWLYHȆZDUUDQW\FDUGȇRUKDVRXWRIWKHZDUUDQW\WLPH
(Except the situation that you can prove the product is still in warranty period.)
• Alter warranty card without authorization.
• Product function damage caused by man-made reason.
• Damages caused by using non-original parts or using the device’s parts improperly.
• Damages caused by incorrect usage, maintenance, safekeeping which is not
following our product manual.
Click the ‘Manual’ app, and you can scan the product manual.
4
5 6
English
