Elos me LESCOLTON ICECOOL II DUAL SYSTEM User manual
2
CONTENTS
Product Introduction……………………………………………………03
Contraindications…………………………………………...................03
Considerations…………………………………………………..……...03
Safety warning………..…………………………………………..…….03
Safety operation regulations……………………………....................03
How to use the device………………………………………………….04
Treatment intervals………………………………………………….….05
Specifications…...……………………………..………………………..05
Table of simple troubleshooting…………………………………........06
3
INTRODUCTION
•The Lescolton Icecool II powered by Elos Me is a dual system with the
functions of hair removal and skin rejuvenation. It integrates the multi-term
application of optical e-light technology in the field of Beauty & Health.
•Before using this device, please carefully read the instructions.
•Suitable for both men and women.
•Individuals with dark skin should begin with the lowest level and then adjust to
the appropriate level based on the adaptability of their skin.
CONTRAINDICATIONS
•Not suitable for individuals under 16 years old.
•Avoid use on inflamed skin.
•Avoid use in cases of photosensitivity.
•Avoid use if you have an implanted medical electronic device that may lead to
operational errors.
CONSIDERATIONS
•This product has not been tested on pregnant women.
•Do not use the product directly on tattoos, as they may absorb a significant
amount of energy.
•Avoid use around the eyes, neck, or nipples, as the skin in these areas is
relatively sensitive.
•If the skin continues to be inflamed or swollen after 24 hours, discontinue use
until symptoms disappear.
SAFETY WARNINGS
•Do not obstruct the vents during use.
•Ensure that the device does not come into contact with water or moisture.
•Prohibited to use the device in inflammable or explosive conditions.
SAFETY OPERATION REGULATIONS
•Avoid aiming the light at your eyes.
•Do not look directly at the light.
•Before using the device, ensure that you have removed all metallic objects such
as rings and bracelets to prevent device malfunction.
•Use the machine in a room with a temperature below 25 degrees Celsius.
4
HOW TO USE
•Before using the device, it's preferable to wax all the hair around the treatment
area. If you can't wax, you can shave the treatment area.
•Insert the power cable into the machine and plug it in.
•Turn on the machine using the touch power button on the left side of the LCD
screen. Press it for 2 or 3 seconds until the device turns on.
•Use the same power button to select the desired power level. Each time you
press the button, the power level will increase. If you do not feel any tingling or
discomfort at the lowest power levels, it's best to select the highest possible
power level.
•You can choose from four treatment modes using the button on the right side of
the LCD screen (work mode switch button): hair removal, hair removal with
cooling, skin rejuvenation, and skin rejuvenation with cooling.
•To switch between hair removal and skin rejuvenation modes, press the "work
mode switch button." HR indicates the hair removal mode, and SR indicates the
skin rejuvenation mode.
•To turn on/off the Ice-cool care mode, press the "work mode switch button" and
hold it down for 2/3 seconds. The snowflake icon indicates that the Ice-cool care
mode is on; otherwise, it's off.
•Place the lamp on your skin, and when the green light on the left side of the
device flashes, press the fire button on the handle of the device. You can repeat
shots in the same area 2 or 3 times for better results. To issue the next shot, wait
for the green light on the left side of the machine to flash again.
•To enable the machine to shoot automatically without pressing the shutter
button, you can enter the automatic use mode. To enter the automatic mode,
press the shutter button for two or three seconds until you hear two beeps. This
5
way, the machine will emit shots automatically when the lamp is resting on the
skin. Keep the lamp supported until 2 or 3 shots are emitted for the best results.
•To return to manual shooting mode, press the shutter button again for 2 to 3
seconds until you hear two beeps.
•To use the facial adapter, simply attach the adapter to the machine's lamp.
TREATMENT INTERVALS
•During the first month, treat every 3 to 5 days.
•In the second month, treat weekly.
•In the third month, treat every 15 days.
•Starting from the fourth month, treat every 30 days until permanent hair removal
is achieved.
Definitive hair removal is a process that takes several months. Immediate results are not
expected for two reasons:
1. All body hair must be in the active growth stage to be affected by the treatment,
which may take several months.
2. Multiple treatments are necessary to weaken the hair root in the active growth
stage until it is permanently affected, preventing hair regrowth. Visible changes
will occur over time.
Individuals with blond, grey, or red hair typically require twice as many sessions as
those with black or brown hair. Therefore, the treatment duration may extend to 6 to 12
months.
SPECIFICATIONS
•Main Unit Size: 182x78x151mm
•Package (Box) Size: 231x191x93mm
•Power Supply: Input: 100-240V AC-50/60Hz
•Weight: 1.1 kg
•Irradiation Area: 4 cm2
•External Environment: Temperature Range: -20°C to 50°C
•Warranty: 6-year warranty
6
TABLE OF SIMPLE TROUBLESHOOTING
•No Power: Ensure that the power cord is securely connected.
•Can't Turn On the Machine: Press and hold the "on" button for 2 seconds.
•Level Indicator Is Flashing After Boot: The cartridge may not be properly
installed.
•Automatic Shutdown: The machine automatically shuts down after 5 minutes of
inactivity.
Table of contents
