EMIX EMRM-907C User manual

1
EMRM-907C
CD/MP3 PLAYER
OWNER’S MANUAL
Before operating, please read this manual completely.
FEATURES
CD/MP3/MP4/VCD/DVD player.
VFD display.
Song or paragraph selection player.
Automatic play after the AC power resume.
USB port.
Professional Public Address System

2
Left blank for memo

3
FRONT PANEL
1 Power switch(1 is power on and the “power LED” is on ) 8 Stop keys
2 Power indicator 9 Repeat keys
3 1 -
(
+5
)
keys 10 Search up keys
4 Disc door 11 Search down keys
5 Display screen 12 Skip up keys
6 Open keys 13 Skip down keys
7 Play/pause keys 14 USB jack
REAR PANEL
1 Output jack 4 AC fuse
2 Remote data input 5 AC power input
3 Remote data link
Notice
:
::
:
DVD part of the machine can only output audio signal and has
not video frequency broadcasting function.
OPERATION
The setup can play CMF format such as CD
、
MP3
、
MP4
、
VCD
、
DVD ,etc. In this
equipment .the mode to provide CMF for setup has CD
、
MP3
、
MP4
、
VCD
、
DVD dishware and
mobile hard disk which connected with USB jack, etc . when this two supply modes concurrence in
equipment ,the equipment will read and play the CMF on dish first; when the dish is taken out from
2
10
1
4
3 5
11
12
13
6 7 8 9
14
1 3452

4
dish storehouse , the equipment will read and play the MP3 CMF which connected with USB port
again; while setup is playing MP3 CMF on the mobile hard disk now. At this moment if another
dish is put in the dish storehouse , the equipment will read and play the CMF on dish once again.
Press the “POWER” and turn on the equipment, if there is a dish in storehouse or have a USB
disk inserted into the USB port , it can search automatically and play the CMF from them; If there
is no seemly play music file in the memory ,then, if you press whichever operation button of
MP3,the display screen will display “NO DISC ”.
When some CMF format is playing , this format will be lit on the display screen to show the
carry . For example : The setup is now playing the MP3 format CMF,
“MP3”
will be lit on the
display screen.
1. Disk Load / Unload Press key to open the CD deck, put in or take out a disk and
then press key again for resetting the deck.
2. Play or Pause After the deck reset it will play in order automatic ally .Press key
while playing for pause, Press the key again for releasing.
3. Option Play Press or and or while playing, we can select
any song or any paragraph for play.
4. Stop Press key to stop in any time.
5. Remote run This set can be controlled by a program manager of via a link cord.
For this purpose, fit a link cord from the Remote Link port of this set to the link port of
the program manager. We can use the manager to make programs or timings for this
set.
6. Play Repeatedly When the equipment play the song sequentially, Press REPEAT
key once, it will get into the function of repeat mode selecting, and no change have
been taken place on the screen. Press REPEAT key once again, it will start the
function of the single track and current track play, and
“
”
icon will be
displayed on the screen. Press REPEAT key for the 3rd time, it will play the whole
disc repeatedly, If there is folder exist on the disc, after press REPEAT key the 3rd
time, equipment will play the current folder repeatedly and
“
ALL
”
icon will be
displayed on the screen, and if press REPEAT key for the fourth time at the time, it
will play the whole disc repeatedly and
“
ALL
”
icon will be displayed on the
screen, and if press REPEAT key for the fifth time, it will abolish the setting and
cancel the repeated mode. If there is no folder on the disc, after press REPEAT key for
the fourth time, it will abolish the setting and cancel the repeated mode.
E

5
SPECIFICATIONS
Frequency response
20Hz-20kHz
Signal to Noise Ratio
90dB
Dynamic range
90dB
THD
0.005%
Wow & Flutter
Under the limited level
Output level 0dBV
Protection AC fuse
Power Requirement AC240V/50Hz
Dimensions 485
×
88
×
378mm
Gross weight 6.5kg
Net weight 5.2kg
Specifications are subject to be changed without notice.
CAUTION
●
When the “Power switcher” is off, please pull out the power cord from the socket.
Please keep the equipment out of water.
●
To reduce the risk of electric shock, do not remove the cover.
●
No user parts inside. Refer servicing to qualified service personnel.
Table of contents