Enko KRB13E User manual

96 Stoddard Road, Mt Roskill, Auckland 1041 www.enko.nz 0508 35 674 [email protected]
KRB13E EXCLUSIVE HOLE-IN-ONE BENCH TOP BIN INSTALLATION GUIDE
Parts List:
• 1 Stainless Steel Rim
• 1 Bucket
• 1 Rubber Lid Support
• 1 Lid
• 1 Instruction Sheet
Instructions:
•Choose your desired mounting position.
•Ensure there are no obstructions eg pipes, shelves etc.
•Mark and scribe a 270mm hole.
•Cut hole and test fit stainless steel ring.
•Use builders adhesive to hold the ring in place.
•Slip in the bucket, then rubber lid support, then the lid.
If required you can replace the bucket supplied with your own larger bucket, placed directly under the hole.
Plastic liners can be used with the bucket supplied.

96 Stoddard Road, Mt Roskill, Auckland 1041 www.enko.nz 0508 35 674 [email protected]
How to Care for your New Kimberley Waste Bin
Please make sure you thoroughly read and understand the instructions and follow them carefully.
1. For best results and longevity, always use a bin liner inside yourwaste bin.
2. Always make sure the liner is installed without obstructing any of the bin’s moving parts.
3. Do not overload your wastebin.
4. Do not push the rubbish down to try to compact thewaste.
5. Do not place heavy items on top of the binlid.
6. Never try to close your waste bin with yourfeet.
7. Never force the waste binclosed.
8. Use a soft cloth and warm mild soapy water to regularly clean the interior and exterior of the
waste bin. Do not use harshdetergents.
9. When washing the waste bin, use a soft cloth to dry the wastebin.
10. Be careful to thoroughly dry any areas of metal to avoid rust anddamage.
11. Do not use the bin outside or expose it to theweather.
12. Do not place the waste bin near a heater or hotdevice.