Erica Synths Drum Series User manual

THANK YOU FOR PURCHASING
ERICA SYNTHS DRU ODULE!
Erica Drum Series modules include high-end,
unique functionality and superior quality modules,
which allow you to design extensive, feature rich
modular system for sound design and live
performances. Enjoy!
Erica Synths Cowbell is developed in collaboration with
French company e-licktronic and it’s our take on analogue
cowbell circuits adapted for modular systems. Accent and
CV control over Tune make it distinctively expressive in
studio and live performances.
FEATURES
SPECS
Tune and Decay controls
CV control with an attenuator over Tune
Manual trigger
Accent for better expression
Decay range 120ms - 1100ms
Audio output level -5…+5V
CV level (full span) -5V - +5V
Accent CV level 10V
Tigger level 5V
Trigger time 1ms
Power consumption 14mA @ +12V,
10mA @ -12V
Module width 6HP
Module depth 30mm
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module
below, ‘cause only this will guarantee proper operation of the module
and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are made waterproof.
This Erica Synths module is NOT intended for use in a humid or wet environment.
No liquids or other conducting substances must get into the module. Should this
happen, the module should be disconnected from mains power immediately,
dried, examined and cleaned by a qualified technician.
Transport the instrument carefully, never let it drop or fall over.
Warranty does not apply to modules with visual damages.
Do not expose the module to temperatures above +50° C or below -20° C.
If you have transported module in extreme low temperatures, leave it
in room temperature for an hour before plugging it in.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in its
original packaging. All other deliveries will be rejected and returned to you.
Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS conforming
without use of lead, mercury, cadmium and chrome. Nevertheless, this device is
special waste and disposal in household waste is not recommended.
You will find Erica Synths terms of warranty at www.ericasynths.lv
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 43
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Carre Branding.
Copying, distribution or any commercial use in any way
is prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through
www.ericasynths.lv or via e-mail [e-mail]

Set master tune of the Cowbell.
Set the decay time. It can be way shorter
an/or longer than on the original cowbell.
This is Tune CV attenuator.
COBELL
COBELL
TUNE
DECAY
ACCTRIGG
OUTTUNE CV
TUNE CV LVL
This is the Trigger input.
The LED indicates incoming triggers.
This is the Accent input.
+10V CV will set the Clap to
the maximum volume.
This is the output of
the module.
Use the manual trigger button to check the clap
settings and add some beats during live performance.
This is Tune CV input.