EROAD ehubo2 Installation and operation manual

HOME SCREEN
The Ehubo2 displays your RUC licences, and helps you stay safe on the road,
record trip information and exchange brief messages with administrators in the
oce. Simply tap a shortcut on the Home screen and follow the screen—it’s as
easy as that.
Please note that some options might be unavailable on your Ehubo2.
Please familiarise yourself with New Zealand law and your company’s policy
regarding the use of driver aids when operating a vehicle.
Tap to return to Home screen when your vehicle is parked.
When parked, you can tap an icon to access Ehubo2 features.
When driving, current speed, sharp braking, hard cornering and prolonged
engine idling will be displayed. Colour-coding reflects increased risk
associated with speed. At the end of your trip, you can see your score.
red + audio alert: Unsafe – please drive safely
amber + audio alert: Warning – please take care
green: All good – you’re doing great
EROAD Ehubo2®
Driver Guide
help.eroad.com/nz
© 2016 EROAD. Doc 100100AA1.5. 11/2016
Activate the Ehubo2
screen by tapping it
when your vehicle is
parked.
Ehubo2 is more accurate than
most vehicle speedometers,
so small dierences in speed
readings are to be expected.
For your safety,
watch the screen
only if it is
safe to do so.
! ! !

Before you start driving
When changing drivers
HOW TO LOG IN
HOW TO LOG OUT
If you can’t find your name,
or can’t remember your PIN,
contact your fleet manager.
!
1. Tap to go to Home screen
2. Tap Driver
3. Tap arrows to find your name,
or tap the search icon,
partially enter your name and
tap search
4.Tap your name
5. You can tick Remember me
today to stay logged in until
the next day or a manual
log-o
6.Enter your PIN
Ehubo2 may prompt you to log in,
or you can log in manually:
MIKE MARSH
Ehubo2 may prompt you to log
out at the end of a trip, or you can
log out manually:
1. Tap to go to Home screen
2. Tap Driver
3. Tap Log out
You will be
automatically
logged out
after a period
of engine
inactivity,
unless you
have ticked
Remember me
today.
!
LOG OUT
After auto-logout,
a PIN re-entry is
not required if you
log back in within
60 minutes.
!

HOW TO VIEW RUC LICENCES
For CVIU ocer
To check current RUC status
at any time
Red LED ON indicates
degraded mode
Degraded mode is
highlighted on Home screen
WHAT IS DEGRADED MODE?
In degraded mode Ehubo2 may no longer be accurately recording distance; it
is not an authorised Electronic Distance Recorder during this time. Degraded
mode will end once your Ehubo2 is accurately recording distance again.
1. Tap to go to Home screen
2. Tap RUC on Home screen
3. Tap arrows to scroll through
licences
4.If an enforcement ocer wishes to inspect the RUC licence, release your
Ehubo2 from the mount by loosening the wing nut that secures the Ehubo2.
Then hand the Ehubo2 to the ocer for inspection.
1. Tap to go to Home screen
2. In Degraded Mode, tap
More Info
CVIU ocers can scan
the barcode.
!
Alert your fleet manager if your
Ehubo2 enters degraded mode.
!

HOW TO USE MESSAGING
Tap to change
recipient to “all”
Only read and type messages
while your vehicle is parked!
!
Confirm each entry with Enter!
Or it will not be recorded.
!
HOW TO ENTER A FUEL TRANSACTION
You can:
• Send a new message to all
Depot administrators
• Send a reply message to
the sender or to all Depot
administrators
Tap to
acknowledge
Tap to
access
inbox
Press and hold
to reply
New message
1. Tap to go to Home screen
2. Tap Messages
3. Tap new message icon
4.Type or select a quick message
5. Tap Send
SEND
Great, head around to the
main yard and pick up
the nal load from ...
1. Tap to go to Home screen
2. Tap Fuel
3. Enter the number of litres
4.Confirm with Enter
ENTER
When refuelling your vehicle
Before continuing your journey