Everbilt 9235961 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase
of this hinge. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Everbilt!
USE AND CARE GUIDE
EUROPEAN HINGE FOR FRAMELESS FURNITURE –
FULL OVERLAY DOOR MOUNTING
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Item # 1002 782 610
Model # 9235961
924394100

Please read and understand this
manual before installing this product.
CAUTION:
Always be cautious when using power tools.
Safety Information
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original
consumer purchaser that the product will be free from defects in material and
workmanship. If the product does not comply with this warranty, the
Manufacturer will repair or replace the product or, at the Manufacturer’s option,
refund the purchase price. Repair, replacement, or refund of the original
purchase price is your sole remedy under this or any other warranty on the
product, whether expressed or implied.
For additional details and questions,
please contact Everbilt Customer Service at 1-800-305-1726.
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-800-305-1726
HOMEDEPOT.COM

Pre-Installation
PLANNING INSTALLATION
Ensure all parts listed in the Package Contents section are included and that you have the
listed Tools Required on hand. If any part is missing or damaged, contact customer service.
When planning your installation, ensure the hinge is oriented in its final position as shown.
This hinge is intended for full overlay applications on frameless furniture with the doors
positioned in front of the cabinet.
When installed successfully, these hinges can open to a maximum of 95°.
TOOLS REQUIRED
#2 Screwdriver Pencil or Scribe Ruler (in.
and mm)
Drill 1/6 in. Drill bit 35 mm boring
bit (Forstner bit)
90°
95°

Pre-Installation
PACKAGE CONTENTS
B
A
C
Part Description Quantity
A Hinge 2
B Mounting Plate 2
C #5 x 5/8 in. Screw 8
RECOMMENDED NUMBER OF HINGES PER DOOR SIZE
Use this diagram to determine how many hinges you will need for your door.
If you are hanging a door with a mirror or a door that is wide, you will need additional hinges.
3 ft
3x
5.2 ft
6.5 ft
7.8 ft
2x
4x
5x
≤17 lbs
(≤7.7 kg)
≤30 lbs
(≤13.7 kg)
≤39 lbs
(≤17.7 kg)
≤48.5 lbs
(≤22 kg)

Installation
1Pre-drilling
the installation holes
□Use a pencil and tape measure to
measure and mark the installation
locations as this diagram shows.
□Then use a 1/16 in. drill bit to drill the
cabinet holes and a 1-3/8 in. (35 mm)
boring bit to drill the door hole.
Ensure the door hole is no deeper than
15/35 in. (12 mm). Do not drill through
either the door face or the cabinet.
2Installing the hinges
to the door
□Insert each hinge (A) into the pre-drilled
holes in the door and secure using
two screws (C) for each hinge (A).
1-3/8 in. (35 mm)
Edge of Door Edge of Cabinet
7/8 in.
(21.5 mm)
1-3/8in.
(35mm)
1-1/4 in.
(32 mm) 3/16 in. (32 mm)
1-7/16 in.
(37 mm)
BA
Door Cabinet
ø
A
C

Installation
3Installing the mounting
plates to the cabinet
□Align the mounting plates (B) to the
pre-drilled holes and fasten with two
screws (C) for each mounting plate (B).
4Installing the door to
the cabinet
□Open the hinges (A) to the
fully-extended position.
□Slide each hinge arm (A) to the mounting
plates (B) and tighten the screw (1) on
each plate (B) to secure in place.
B
A
1
5Adjusting the door
□Height Adjustment: Loosen the top mounting
screw (1) to adjust the door up or down.
1
□Overlay Adjustment: Turn the adjustment
screw (2) to adjust the door overlay.
2
□Depth Adjustment: Turn the eccentric screw (3) to
adjust the distance of the doors from the cabinet.
Depth Adjustment: Turn the eccentric screw (3)
to adjust the distance of the doors from
the cabinet.
3
B
C
1-1/4 in
(32 mm)
1-7/16 in. (37 mm)