Solartech M880D User manual

.
..
. Solartech P
PP
Power
owerower
ower,
,,
, I
II
Inc
ncnc
nc.
..
.
Solartech Power, Inc.
1070 N. Kraemer Place
Anaheim, CA 92806 USA
Tel: [phone] Fax: [phone]
www.solartechpower.com
E-mail: [e-mail]
M880D
M880D M880D
M880D Solartech Power Universal Side
Solartech Power Universal SideSolartech Power Universal Side
Solartech Power Universal Side-
--
-of
ofof
of-
--
-Pole Mount Installation
Pole Mount Installation Pole Mount Installation
Pole Mount Installation
Guid
GuidGuid
Guide
ee
e
Component List
Part Qty ID code
Solar Panel Mount Rail 2 1,3
Channel 2 7, 8
Support Rails 2 2,4
Adjustable Bracket 2 5
Fixed Bracket
2 6
U-bolt for ￠ 4’ pole 2
M12 hex-cap bolt for U-bolt
4
M12 flat washer for U-bolt
4
M12 split lock washer for U-bolt
4
M12 hex nut for U-bolt
4
M10 hex-cap bolt
16
M10 flat washer
16
M10 split lock washer
16
M10 hex nut
16
Solar Panel
Mount Rail
Adjustable
Bracket
Support Rails
Channel
Fixed
Bracket
U
-
bolt
The Mount support PV panels:
SPM060P, SPM065P, SPM080P,
SPM085P, SPM090P, SPM100P

.
..
. Solartech P
PP
Power
owerower
ower,
,,
, I
II
Inc
ncnc
nc.
..
.
Solartech Power, Inc.
1070 N. Kraemer Place
Anaheim, CA 92806 USA
Tel: [phone] Fax: [phone]
www.solartechpower.com
E-mail: [e-mail]
Step1 - mounting the rail supports on the PV module
Step 2 - attaching the adjustable bracket
to the top channels and finger tighten.
Step 3 Attaching the fixed bracket to the bottom channels ，
，，
， then bolt one end of support
rail （
（（
（ with optional hole location ）
））
） to the corresponding fixed bracket, and finger tighten.
Step 4 - attaching the channels to the pole
Lay the PV module face down on a protected
surfaced and attach Solar Panel Mount Rail and
finger tighten ，两个组件并排放在一起。
Note:
Choose the right location as Step 1
TIP:
Lock the top channels on pole, left
bottom channel slack, so you can
adjust the angle easily

.
..
. Solartech P
PP
Power
owerower
ower,
,,
, I
II
Inc
ncnc
nc.
..
.
Solartech Power, Inc.
1070 N. Kraemer Place
Anaheim, CA 92806 USA
Tel: [phone] Fax: [phone]
www.solartechpower.com
E-mail: [e-mail]
Step 5 - mounting the PV assembly on the pole
安装好的组件和支架
Place the PV module assembly so the holes on the
adjustable bracket line up with holes in the inside
of the channels.