EVOnet S47761 EVOnet-LM2000 User manual

This manual is intended for users of the EVOnet-LM2000 pole
mounting bracket. It includes instructions for mounting the
EVOnet-LM2000 pole mounting bracket to a pole.
• This bracket is intended to be used with the EVOnet-WM2000
Bracket and the EVOnet series cameras. Do not use it with other
models of cameras.
• This installation should be performed by a qualied service
personnel in conformance to all local codes.
• You may need to reinforce the pole. If the pole is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the pole as follows:
1 Mount bracket 1 to the pole. Fasten
bracket 1 to the pole by adjusting
the strap length. You can adjust
the strap length by tightening or
loosening the clamp screw.
Pole
Bracket 1
Strap
Connect your camera (EVOnet series 4) to the bracket as follows:
2 Mount bracket 2 (EVOnet-WM2000
model) onto bracket 1 by using
the screws. The bracket 2 is sold
separately.
Bracket 2 (EVOnet-WM2000)
Hexagon Socket Screw M5X30, 4EA
Bracket 1
S47761 EVOnet-LM2000 INSTALLATION MANUAL

Connect your camera (DC-T series) to the bracket as follows:
2 Mount the camera body onto bracket 1
by using the screws.
3 Turn on power.
Camera Body
Bracket 1
Dimensions
Unit: mm (inch)
4-TAP M4, TRUE
4-TAP M5, TRUE 12-TAP M5, TRUE
64 (2.52)
Ø 40 (1.57)
70 (1.76) 83 (3.27)
110 (4.33)
Ø 84 (3.31) Ø 57 (2.24)
32 (1.26)
100 (3.94)
70 (1.76)
40 (1.57)
100 (0.39)
2
(0.08)
R2
30 (1.18)14.14
(0.56)
135°
14
(0.55)
5 (0.20)
22
(0.87)
22
(0.87)
15
(0.59)
15
(0.59)
36
(1.41)
Ver.1.0
For more information on these and other best-in-class solutions
from Hills, call us on 1800 685 487 or visit hills.com.au