
2
⁄press the button
on the device until
the led light is on
turn on
the device
⁄continuous green: the device is turned
on but is not recording data yet
⁄intermittent green: the GPS signal is
present and the data can be recorded
⁄pulsating green: the device is on
charge on a wireless charger
⁄continuous or intermittent orange: the
battery charge level is below 20%
⁄continuous red: the memory is full
and the device data must be downloaded
through the gpexe bridge, or the device
may be faulty
⁄rapid intermittent red: magnetometer
calibration in progress
⁄rotating blue: data is being
transferred from the device to the PC or
firmware is being uploaded from PC to
device
⁄intermittent blue: the device is
connected to the gpexe link and is
providing real time data
1⁄activate your gpexe
account following the email
instructions received by the
web app administrator
⁄create players and team
⁄install the gpexe bridge
app for data transfer
Visit the academy section inside the gpexe web app to
access the manuals and tutorials about the use of the
system.
set up the
gpexe software