Experia Monkey Climber User manual

Monkey Climber
43 00 60
Product Manual

Congratulations on the purchase of your Monkey Climber!
The Monkey Climber is a wonderful addition to our product range.
It can be used as part of an obstacle course to address gross motor coordination as well as provide proprioceptive
input.
Please ensure you read and follow these Instructions carefully before installing or operating the unit.
Please keep this manual for future reference.
Heed all warnings on the product and within this manual. If upon receipt of this product, the user suspects that the
product is defective, and/or requires service or repair due to malfunction or damage to the product, please contact
the manufacturer immediately. Please be aware that improper installation and/or misuse of this product may result
in injury, death, or adverse reactions to its user. This product is intended to be installed and/or used by a trained
professional. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates
safety standards of design, manufacture, and intended use of the product.
We recommend the use of padding around this unit - available separately.
Max weight for any Monkey Climber unit is: 200kg.
Tools required = 13mm Spanner (not supplied)
Features
 Stylish design.
 Made from strong Russian Birch timber.
 Modular and easy to set up.
 Self-assembly required - should take 15 minutes with 2 people.
 It can be used with various associated units to help develop numerous skills.
 Positive tactile experience.
 Provides proprioceptive input.
Pack contents
1x Ladder Top
2x Ladder Sides
4x Feet
32x Bolts
32x Washers
32x Safety Caps
Unpacking your Monkey Climber
Check packaging for signs of damage before opening.
Do not use sharp objects during unpacking.
Check the parts received against the Pack Contents.
Read the product manual before use.

Assembly Instructions

Assembly Instructions
Tools required for assembly; 13mm Spanner (not supplied)
Fixings supplied
32x M8 x35mm Hex Bolts.
32x M8 Form A Washers Zinc plated.
32x M8 Black Safety nut cap.
Assembly
There are four holes on each end of the Ladder Sides with threaded inserts.
The hole spacing on one end match the holes on the feet.
The holes at the other end are for the Ladder Top.
Put a washer on each bolt.
Place the feet on the outside of the Ladder Sides
Match the holes in the feet with the Ladder Sides.
Put the bolt through the feet into the Ladder Sides.
Start all four bolts, then tighten them securely using a 13mm spanner.
Attach the foot on the opposite side in the same way.
Assemble the other Ladder Side in the same way.
Attach one end of the Ladder Top to the end of a Ladder Side putting the bolt / washer through
into the threaded insert.
Start all bolts, then tighten them securely using a 13mm spanner.
Tighten all bolts securely.
Push the safety nut caps over each exposed bolt head.

Cleaning and Maintenance
It is advisable to check for splinters before every planned use of the Monkey Climber.
On a weekly basis check for loose bolts and tighten any found.
The unit should be cleaned with a damp soft cloth. A non abrasive cleaning agent may be used for stubborn stains.
No sharp objects should come into contact with the item at any time.
Safety Precautions
Under no condition should this equipment be used without proper supervision.
Appropriate spotting / safety techniques should be used at all times.
The safety of the Monkey Climber users is dependent upon the appropriate choice of activity to match or challenge
their physical abilities.
The layout of your activity area, proper installation and maintenance of your equipment is essential.
Experia Sensory Integration equipment is not intended for recreational or outdoor use.
Technical Specifications
Dimensions: 1800L x 830W x1320mmH.
Max load weight for any Monkey Climber unit is: 200kg.
Trouble Shooting
If you suspect anything is wrong with your sensory integration equipment supplied by Experia and you have con-
structed it correctly following these instructions then please contact our office using the detail supplied at the end of
this document.

Guarantee
All products manufactured by ourselves are backed with a three year guarantee.
All other items carry a manufacturers 1 year guarantee.
All guarantees are collect and return.
If your product needs to be returned to our factory we will arrange collection of the item and return it to you when
repaired, all we ask is you pack the product securely.
If in the unlikely event that a product purchased from us develops a fault please contact us on
Freephone 0800 612 6077 or email us and our technical team will assist
Experia Registered Office:
Acorn Phase 3
High Street
Grimethorpe
S72 7BD
If you have any questions or need information about any of our products and services please call us on
Freephone 0800 612 6077
If you would like a FREE Sensory Brochure you can request one by telephone or visiting our website.
For more information on Experia Free 3D Room Designs or to schedule an onsite visit from our sales team then
please request a visit by telephone, email or by using the form on our website.
Support Contact Details
For USA please email [e-mail]
For Canada please email [e-mail]
For UK and rest of the world email [e-mail]
Telephone: [phone].
Please note: email is our support teams preferred communication and this takes precedence over telephone calls.
Manufactured in the UK by:
Experia, Acorn Phase III, High Street, Grimethorpe, Barnsley, South Yorkshire, S72 7BD
© Copyright 2015 Experia All rights reserved Experia. Experia is a registered trademark