
Detail Instructions
1. Insert Micro SD card
Note please use brand Micro SD card, format it on a computer before using, a low quality
card may not be guaranteed to work properly.
2. Battery Charge
A.Connect to computer or a power adapter by USB cable for charging.
B.Use car charger can also be charged in the car.
CWhen charging, the red indicator light will stay on, once fully charged, the red light will turn
off.
3. Camera on and off
A.Long press the Power button/Mode key for about 3seconds, camera will turn on.
B.Long press the Power button/Mode key for about 3seconds, camera will turn off. .
4. Mode switch
Short Press Power button/Mode key will change the camera to video / photo / playback /
setup menu / this four mode.
5. Video recording
A.Insert Micro SD card, then turn on the camera..
B.Then short press the “OK” button, camera will start recording video.
C. To stop recording video, press the “OK” button again.
6. Photo taking
A.Change the camera to photo mode by pressing the Power button/Mode key
B.Short press the “OK” button to take the photo.
7. Playback mode
By pressing mode button switch to Playback mode, the press up and down keys to select the
video or photo to review, and press OK to play video.
8. Menu settings
A. When switch to Menu setting up mode.
B. Press up and down button to selectthe menu, press the “OK” button to select.
9. Connecting to computer
With USB cable connect camera to the computer, the screen will appear 3 connection mode:
Mass storage/ PC camera/Charge battery.You can press the up/down button to select the
connection mode.
2