Farmnavigator G7 Dataseed User manual

INSTALLATION MANUAL
MMG7DFMAE011
ÑMMG7DFMAE011UÓ

1. Technical Specifications
●Dimensions: 188 x 146 x 33 mm (7.40” x 5.74” x 1.29”)
●Weight: 640 g
●Display: 7”
●Display resolution: 1024 x 600 px
●Display brightness: 1000 nits
●Touch-screen: capacitive multi-touch
●Built-in GPS: WAAS/EGNOS/MSAS/GAGAN
●Memory card: MicroSD slot
●Wireless LAN connection capability
●Water and dustproof: IP56
●Supply voltage: 10-35 Vdc
●Operating temperature: -10°C / +60°C (+14°F / +140°F)
●Storage temperature: -30°C / +80°C (-22°F / +176°F)
●Transmitting frequency range: 2400 - 2483 MHz
●Maximum transmitting power: 100 mW
●Maximum power consumption: 1.5 A @ 12 V
2. Installation
1
2
1 2
3 4

1
2
1
2.1 To uninstall
3. MicroSD instructions
1 2 3
4 5 6

P5 PIN-OUT
PIN n° Function
2GPS TX
3 GPS RX
4 GPS VCC
5 GPS GND
4. Connections scheme
Wireless LAN connection capability
P2
P4 PIN-OUT
PIN n° Function
2DEVICE 2 TX
3 DEVICE 2 RX
5 DEVICE 2 GND
P3 PIN-OUT
PIN n° Function
2DEVICE 1 TX
3 DEVICE 1 RX
4 DEVICE 1 VCC
5 DEVICE 1 GND
9EXTERNAL
ALARM
P5
P4
P3
PWR +
PWR -
2A Fuse
61
95
61
95
61
95
Images are for illustrative purpose only and can di󰀨er from the real product.
GPS antenna
Controller
Generic device
Power
supply
4.1 Power supply connection
Cigarette lighter
Battery
Cobo Socket
*
*

4.2 USB, video camera and Ethernet connection
Video IN
RCA female jack Video camera
USB key
(to update software and
import/export tracks)
Auto-steering
USB
A type female
connector
Ethernet
RJ45 jack
4.3 Connection to All in One RTK
Controller
Generic Device
GPS Antenna Receiver
Power cable
4.3.1 All in One RTK installation on the implement
In order to achieve the highest accuracy, the receiver must be installed following the instructions below:
1. All In One RTK must be installed on the center of the implement.
The center has to be measured accurately!
L/2 L/2

4.4 Connection to ECU Dataseed (if included)
WARNING: Before connecting the ECU Dataseed make sure you are in a safe condition.
ECU Dataseed must be firmly installed in a position where any damages to the ECU, cables and other
parts are avoided.
Generic Device
GPS Antenna
RIGHT
2. All in One RTK must be installed horizontally, using the Steady Steel Bracket to avoid vibrations
3. The connector for power cable must be oriented opposite to the driving direction.
Please refer to the All in One RTK Installation manual for more details.
4. Do not cover the All in One RTK with metal or plastic parts, keep it clean and in safety position.
LEFT
Hydraulic valves
CONTROLLER

5. Operations
Explore the map Rotate the map Zoom the map
Main Menu Work View
To complete the installation:
1. Use a 1/4 inch nut driver to fix the main cable harness connector to the ECU Dataseed.
2. Fix the right and left connectors to the hydraulic valve on the implement.
3. Connect the power cable to the switched power.
IMPORTANT: the G7 Dataseed does not switch off automatically the ECU Dataseed.
Please refer to the ECU Dataseed Installation manual for more details.
Select
5.1 Other gestures
Scroll page
5.2 Menu on Work View

Record track
Pause the track
Stop the record
Auto / Manual
Manual right
Manual left
1
2
3
4
5
6
1
5.3 Buttons on map
2
3
4
5
6
6. Simplified EU declaration of conformity
Hereby, AvMap Srl, Viale Zaccagna 6, 54033 Carrara (MS), Italy declares that the radio equipments
in the following table are in compliance with Directive 2014/53/EU.
G7 Dataseed P3MJ56WWAM
The full text of the EU declaration of conformity is available at the following internet address:
eudeclaration.avmap.it
www.farmnavigator.com
AvMap Srl
Viale Zaccagna, 6
54033 Carrara (MS), Italy
www.avmap.it
[email protected]
7. Safety Information
AvMap disclaims any liability deriving from an improper use or installation of the product in a way
that may violate the regulations and safety. It is highly recommended that the installation of the
product will be performed by a qualied maintenance technician. Consult the Installation manual for
a correct installation procedure.