Fatar ST-90 User manual

SPLIT
Tosplitthe keyboard in two parts all you do is,
pressthekeythatyouwishtobethedividingpointonthe
keyboard then press the switch«SPLIT».
Obviously once split, the keyboard is separated
in twodistinctparts, the LOWER part willgo
throughchannelMIDI 1 and the UPPER part
throughchannel MIDI2.
If you press only «SPLIT»and no key the entire
keyboard will transmitthrough MIDI 1
TRANSPOSER
LOWER: totranspose the LOWER part ofthe
keyboard press thenote you want tocorrespond
to initialA thenpress theswitch«LOWER».
UPPER:to transpose theUPPER part ofthe
keyboard pressthenoteyouwanttocorrespond
lo thefirstkeyofthesplitthenpress «UPPER».
When you split,transpositionwillbe automa-
tic.thelowerpartwillincreasebyone octave
and theupperpartdecreases by one octave.
TECHNICALDATA
Supplywillrequirea standardadapterwitha
variablecontinuousoutputvoltageranging9 to
12 V and 350mAcurrentminimum.
Thekeyboardincludestwomidioutputstopilot
other instruments. There isalso a F00T-
SWITCH jacktowhich you can connect an
OFF-ON pedal which will enable a sustain
effectthrough midi ofthepopalar synthesizers
andexpandersonthemarket.