Feider Machines FAJ700A User manual

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 1-1.5 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
FAJ700A
FEIDER
32 Impasse Aristide Bergès, 31270 CUGNAUX - FRANCE

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
It requires two people a full
day to complete installation

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.

PART
NO. Qty.
1L
PART
NO. Qty.
2
2R
3L
1490mm
1R
2L
1565mm
4L
4R
5
6
7
8
9
10L
10R
11
13
14
15-1
15-2
16
3R
12
16-1
17L
17R
18
19
21L
21R
B1
B2
B3
B4
1490mm
1169mm
1169mm
809mm
809mm
1560mm
1560mm
818mm
876mm
1105mm
1105mm
1436mm
1118mm
1118mm
1436mm
356mm
1494mm
1494mm
876mm
876mm
1565mm
1207mm
1207mm
432mm
876mm
139mm
139mm
286mm
286mm
2
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
1
1
2
2
6
2
2
2
2
1
1
2
2
2
15
1304mm
2
20
1304mm
1
22L
22R
1439mm
2
2
23L
23R
1118mm
1
1
1118mm
1439mm

1560mm
PART
NO. Qty.
G2 4
2
GD
GB
GC
4
F1
F2
F3
S3
460
8
75
432
S2 366
PART
NO. Qty.
1550X432mm
D1 1
D2 1
4
P1
P9
P4
P10
P11
P7
1207mm
2
2
4
2
2
10
P3 15
GE 2
1207mm
1207mm
1550X432mm
1560mm
1560mm
1560mm
GF 4

15
15-1
GE
17L
17R
15-2
19
GC
GC
GE
P10
P11
17L
GC
GC
17R
11
9
1R
1R
1L
1L
2L
2R
3L
3R
5
7
8
P1
P1
P4
P4
P4
P4
D1
D2
18
6
4R
4L
11
9
10L
10R
P3
P3
P3
P3
15
20
P10
P11
P3
P9
P9
13
14
16-1
16
13
14
21R
21L
21L
21R
12
B1
B3 B4
B2
12 B1
B3
B4
B2
19
P7
P7
P7
P7
P7
P7
P7
P7
P7
P7
15-2
15-1
P3
P3
P3
P3
P3
P3
P3
P3
P3
P3
23L
23R
22L
22R
22R
22L

2L
2R
1R
1L
F1
F1
-7-
1L
PART
NO. Qty.
2
F1
1L
1R
1R 2
2L
PART
NO. Qty.
1
F1
2R
2L
2R 1
1L
1R
x2

PART
NO. Qty.
1
1
3L
3R
3L
3R
F1
F1
PART
NO. Qty.
1
5
5
F1 F1
1、When diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
-8-

PART
NO. Qty.
P9 1
F1
S3
1
-9-
F1
Ⅱ
Ⅰ
S3
P4
F2
S3
PART
NO. Qty.
P3 1
F1
S3
P3
Ⅰ
Ⅱ
P4
P9
5
5
5
22R
PART
NO. Qty.
22R 1
S3 F1

PART
NO. Qty.
1
P4
P4
Ⅰ
ⅡF1
Ⅱ
S3
Ⅰ
F1
S3
5
-10-
S3 F1
22R
23R
22L
F1
PART
NO. Qty.
22L 1
23R
PART
NO. Qty.
23R 1
S3 F1
F1

PART
NO. Qty.
P3 1
F1
S3
PART
NO. Qty.
1
P4
F1
S3 F1
Ⅱ
Ⅰ
S3
P4
P3
Ⅰ
Ⅱ
5
5
-11-
PART
NO. Qty.
S3 F1
23L 1
23L
F1

PART
NO. Qty.
P9 1
1
P4
F1
Ⅱ
S3
Ⅰ
F1
S3
F2
S3
Ⅰ
Ⅱ
P4
P9
5
PART
NO. Qty.
22R 1
-12-
S3 F1
F1
22R
22R
23L
5
PART
NO. Qty.
22L 1
F1
S3 F1

F1
PART
NO. Qty.
2
9
2
11
PART
NO. Qty. PART NO. Qty.
2
2
21L
21R
2
2
B3
B4
2
2
B1
B2
2
12
x2
21L
21R
B4 B3
B1
B2 12
12
B3
21L
-13-
F1
S3
F2
S3
PART
NO. Qty.
2
P1
P1
P1
F2
S3
9
11
5
9
11

-14-
10L 10R
PART
NO. Qty.
1
10L
1
10R
7
8
PART
NO. Qty.
1
7
1
8
G2 4
7&8
G2
F1
S3
x2
PART
NO. Qty.
GF 4
GF GF
F2
S3
87
G2
10L
10R
F1
S3

PART
NO. Qty.
1
16
1
16-1
F2
PART
NO. Qty.
P3 13
PART
NO. Qty.
2
2
13
14
13
14
F2
x2
F1
S3
P3
P3 P3 P3 P3
P3
P3
P3
P3
P3
P3
P3
P3
-15-

16
16-1
F2
12
F2
12
4L
4R
6
PART
NO. Qty.
1
4L
1
4R
1
6
F1
S3
14
13
13
14
Ⅰ
Ⅱ
Ⅰ
Ⅱ
Ⅰ
F2
F2
Ⅱ
F1
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
F2
F2
-16-
6
4R

PART
NO. Qty.
1
P10
P11 1
F1
S3
F1
S3
F1
S3
-17-
PART
NO. Qty.
10
P7
PART
NO. Qty.
1
P10
P11 1
P11
P10
P10
P11
P7
P7

19
19
PART
NO. Qty.
19 2
F1
S3
PART
NO. Qty.
2
17L
17R 2
F1
GE
17R
20
17L
F1
17R
GC
F1
15-1
24-1
24-1
PART
NO. Qty.
15-1
15-2
Ⅱ
Ⅰ
17R
17R
17L 17L
GE
GE
2
GE
15-1
15-2
15
15-1
Ⅰ
Ⅰ
Ⅰ
Ⅰ
Ⅱ
Ⅱ
GC
GC
GC
GC
4
GC
2
15
15-2
15
20 1
20
-18-
2
2

-19-
PART
NO. Qty.
GD 4
D1 D2
GE S3 F2
PART
NO. Qty.
6
18
D1&D2
18
18
18
S3
F1 F2
x2
S3
F2
PART
NO. Qty.
D1 1
D2 1
2
GB
x2
GB
F2
D1&D2

-20-
F3
7&8 G2
D1 D2