Feider Machines FAJ200A Assembly instructions

Metal Garden Shed
OWNER'S MANUAL
Instructions for Assembly
Requires two people and takes 1-1.5 hours for lnstallation.
Quick & Easy Assembly
Ridge Reinforced Walls
Available in Various Sizes
FAJ200A
FEIDER
32 impasse Aristide Bergès, ZI du Casque, 31270 CUGNAUX - FRANCE
All manuals and user guides at all-guides.com

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
It requires two people a full
day to complete installation
Check to be sure that you have all the necessary parts for the building.Separate contents
of the carton by the part number while reviewing parts list.Familiarize yourself with the
hardware and fasteners for easier use during construction. These are packaged within the
carton. Note that extra fasteners have been supplied for your convenience.
All manuals and user guides at all-guides.com

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.
All manuals and user guides at all-guides.com

PART
NO. Qty.
1L
PART
NO. Qty.
1
2R
3L
966mm
1R
2L
4L
4R
5
6
7
8
9
10L
10R
11
15
16
3R
12
17L
17R
18
19
21L
21R
B3
B4
955mm
955mm
600mm
600mm
1560mm
1560mm
808mm
876mm
891mm
891mm
926mm
904mm
904mm
926mm
356mm
1090mm
973mm
986mm
986mm
432mm
1090mm
230mm
230mm
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
2
6
1
2
2
1
1
2
2
966mm
All manuals and user guides at all-guides.com

1560mm
PART
NO. Qty.
G2 4
2
GD
GB
GC
4
F1
F2
F3
S3
190
8
55
180
S2 80
PART
NO. Qty.
1550X432mm
D1 1
D2 1
4
P1
P4
P10
1560mm
2
4
1560mm
P3 4
986mm
1550X432mm
GE 2
P9
1560mm
2
P11
986mm
2
2
P12
986mm
2
GF 4
All manuals and user guides at all-guides.com

P1
P1
1L
3R
5
3L
8
7
D1
D2
4R
4L
6
18
18
10L
11
P4
10R
2L
2R
1R
P4
P4
9
GE
P11
P10
17R
17L
15
GE
17L
17R
15
19
GC
GC
GC
GC
16
21R
21L
21L
21R
12
B3 B4
12
B3
B4
P3
P4
P12
P11
P10
P12
P3
P3
P3
P9
P9
All manuals and user guides at all-guides.com

F1
F1
PART
NO. Qty.
1
1
3L
3R
3L
3R
F1
F1
-7-
2L
PART
NO. Qty.
1
F1
2R
2L
2R 1
2L
2R
1L
1R
1L
PART
NO. Qty.
1
1R 1
All manuals and user guides at all-guides.com

PART
NO. Qty.
P1 1
F1
S3
PART
NO. Qty.
1
5
5
F1 F1
1、When diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
-8-
5
P1
All manuals and user guides at all-guides.com

PART
NO. Qty.
1
-9-
F1
Ⅱ
Ⅰ
S3
P4
F2
S3
PART
NO. Qty.
P3 1
F1
S3
PART
NO. Qty.
1
P4 Ⅰ
F1
Ⅱ
S3
P3
P4
5
5
5
Ⅱ
P4
Ⅰ
F2
S3
All manuals and user guides at all-guides.com

-10-
F1
S3
PART
NO. Qty.
1
P4
F1
S3
PART
NO. Qty.
P3
P3 1
F1
Ⅱ
S3
Ⅰ
Ⅰ
Ⅱ
P4
5
PART
NO. Qty.
1
P9
5
F2
S3
F1
S3
P9
F2
S3
All manuals and user guides at all-guides.com

-11-
PART
NO. Qty.
PART
NO. Qty.
1
P1
1
P4
P4
F1
S3
F2
S3
5F1
S3
P1
P9
F1
S3
PART
NO. Qty.
1
P9
F2
S3
All manuals and user guides at all-guides.com

PART
NO. Qty.
1
9
111
PART
NO. Qty. PART NO. Qty.
2
2
21L
21R
2
2
B3
B4
2
12
x2
21L
21R
B4 B3 12
12
B3
21L
5
9
11
-12-
x2
PART
NO. Qty.
GF 4
GF GF
F2
S3
All manuals and user guides at all-guides.com

10L 10R
PART
NO. Qty.
1
10L
110R
P3
P3
-13-
10L
10R
7
8
PART
NO. Qty.
1
7
1
8
G2 4
P3
5
PART
NO. Qty.
2
P3
7&8
G2
P3
87
G2
All manuals and user guides at all-guides.com

-14-
PART
NO. Qty.
1
4L
1
4R
1
6
PART
NO. Qty.
1
P11
P10 1
PART
NO. Qty.
1
16
4L
4R
6
4R
6
F1
S3
F2 S3 F2
S3
F1
S3
P11
P10
16
16
F2
12
F2
12
All manuals and user guides at all-guides.com

-15-
PART
NO. Qty.
1
19 19
F1
S3
P10
P11
PART
NO. Qty.
2
P12 F1
S3
PART
NO. Qty.
1
P11
P10 1
P12
P12
All manuals and user guides at all-guides.com

-16-
PART
NO. Qty.
D1 1
D2 1
2
GB
x2
GB
F2
D1&D2
PART
NO. Qty.
2
28
GC
S3
F1
4
GC
15
15
17R
17R
17L
17L
GE
GE
PART
NO. Qty.
2
17L
17R
GE
2
2
F1
GE
17
20
17
15
All manuals and user guides at all-guides.com

-17-
PART
NO. Qty.
GD 4
D1 D2
GE S3 F2
PART
NO. Qty.
618
D1&D2
18
18
18
S3
F1 F2
x2
S3
F2
All manuals and user guides at all-guides.com

F3
7&8 G2
-18-
All manuals and user guides at all-guides.com

Metal Garden Shed
Instructions for Assembly
Metal Garden Shed
Foundation Kit
Instructions for Assembly
MF-YX46
All manuals and user guides at all-guides.com

W1
W1
W1
W1
W3
W3
W3
W3
5
W1 W1
W1 1R
W1
1L
W3
W1
PART
NO. Qty.
W1
W3
4
4
432mm
938mm
F1 20
All manuals and user guides at all-guides.com