Fender VICTOR BAILEY JAZZ BASS Quick start guide

CAVITY
ASSEMBLY THROUGH CHANNEL TO ELECTRONIC
INSERT CABLE FROM DOUBLE BATTERY-SNAP
SO SNAPS CAN'T PULL BACK TO CAVITY
SNAP ASSEMBLY BLACK & RED WIRE(S)
APPLY TIE WRAP TO DOUBLE BATTERY
TO GROUND LUG
BRIDGE PICKUP AND BRIDGE GROUND
SOLDER BLACK WIRE FROM NECK PICKUP,
TO GROUND LUG
GROUND ASSEMBLY AND PC-BOARD
SOLDER BLACK WIRE FROM JACK ASSEMBLY,
AND RED WIRE FROM PC-BOARD
RED WIRE FROM DOUBLE BATTERY SNAP
SOLDER AND SHRINK TUBE TOGETHER
AND WHITE WIRE FROM PAN POT
WHITE WIRE FROM BRIDGE PICKUP
SOLDER AND SHRINK TUBE TOGETHER
WHITE WIRE FROM JACK ASSEMBLY
WHITE WIRE FROM PC-BOARD AND
SOLDER AND SHRINK TUBE TOGETHER
INAL (1) OF PAN CONTROL
GROUND-LUG ASSY TO TERM-
SOLDER BLACK WIRE FROM
017405
VICTOR BAILEY JAZZ BASS 0196800
WIRE DIAGRAM
06-17-2002 Rev. A
Pg. 2 of 4
DETAIL"A"
NECK PICKUP
BRIDGE PICKUP
T
R5
C2
C5
C4
IN
C1
R2
R1
C3
R4
R22
R25
C12
R3
R6
U1
P4
R23
C13
R24
GND
+9V
OUT
R15
R10
R11
R7
D1
C8
R12 R16
R9
C7
C6
R8
R13
B
R20
R21
R17
C10
C11
R14 R18
C9
M
R19
SOLDER & SHRINK TUBE WHITE
WIRE(S) FROM PC - BOARD & PAN-
CONTROL ASSEMBLY
AND BLUE WIRE FROM JACK ASSEMBLY
BLACK WIRE FROM BATTERY SNAP (1)
SOLDER AND SHRINK TUBE TOGETHER
STRIP 3/8" FROM END OF
WIRE, GROUND UNDER
BRIDGE PLATE
SOLDER AND SHRINK TUBE TOGETHER
YELLOW WIRE FROM NECK PICKUP &
YELLOW WIRE FROM PAN-POT
21
(2)
21
12
13
14
11
PAN CONTROL MOUNTING
DETAIL " A "
3" BLACK WIRE
TO GROUND-LUG
TO GROUND-LUG ASSY
YELLOW WIRE TO NECK PICKUP
WHITE WIRE TO P.C. BOARD
WHITE WIRE TO BRIDGE PICKUP
BRIDGE ASSEMBLY
24
25
28
27
23 26