ferm living SILL JUNIOR User manual

SILL JUNIOR BED
ASSEMBLY MANUAL

fermliving.com
SILL JUNIOR BED
ASSEMBLY MANUAL

21
ASSEMBLY PROCESS
1.
24 x Lamella screws
x 12
NEED FOR ASSEMBLING
NEEDED TOOLS
Screwdriver
(Philips/Prozidriv
HammerElectrical drill
2 x Persons
12 x Drowels 4 x Connector 4 x Connector screws
1 x Hexkey
1 x Hexkey
Insert the drowels into the designated holes.
Please note that you should not insert drowels in the middle hole.

43
2. 3.
x 4 x 4
Insert the connector in the round holes
of the head and footboard. Then, fix
the head and footboard to the two sides
by inserting the connector screws into
the connector. Once in place, tighten
everything well with the hex key.
Using a screwdriver, mount the
connector screws on each end
of the sideboards.

65
4. x 24
As illustrated, mount the bed slats to
the bed using the small bracket screws.