Mocka Darby Change Table User manual

Darby Change Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips screwdriver required
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wal
materials may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
D E
ABC
Hardware Supplied
Wall Strap
8x
metal dowel
1x
allen key
8x
bolt
1x
screw
1x
wall screw
F
2x
washer
G
1x
wall anchor
H
1x
wall strap

12
Darby Change Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4 x panel (2) to panel (1) with 4 x metal dowels (B). Screw in 4
x bolts (A) into panel (1). Tighten all bolts with allen key (C).
Insert 2 x panel (3) into grooves in panel (2).
A
C
A
A
B
B
B
B
A
3
3
4
2
4
5
5
1
1
2
4
4
A

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Darby Change Table
Attach panel (4) to panel (2) & (3) with 4 x metal dowels (B). Screw in
4 x bolts (A) into panel (4). Tighten all bolts with allen key (C).
1
3
1
5
A
A
C
A
A
B
B
B
B
2
5
4
A
4
Once assembled lift furniture into place, do not drag. Attach wall strap
(H) to panel [2] with 1 x washer (F) and 1 x screw (D). Use a drill to
create a small hole lining up with the safety strap (H). Fasten to wall
using 1 x wall anchor (G), 1 x washer (F) and 1 x wall screw (E). Ensure
unit is balanced and steady before use. You’re done, enjoy!
2
D
E
F
G
H
F